Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 48 mm |
| Outer diameter | 84 mm |
| Inner diameter | 49 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Weight | 1.155 kg |
| Type | Wheel Bearing Kit |
| Additional Information | with gaskets/seals |
| Additional Information 2 | with shaft seal, with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (23657)
- 1x Febi Shaft Seal, wheel bearing (23662)
- 6x Febi Screw (23658)
- 1x Febi Seal Ring, wheel hub (23661)
- 1x Febi Seal, axle cap (23660)
- 1x Febi Cover Plate, dust-cover wheel bearing (23659)
£40.39
Important compatibility info
| Weight | 0.81 kg |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Number of Wings | 8 |
| Number of Teeth | 23 |
| Material | Cast Aluminium |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.87
Important compatibility info
| Weight | 0.245 kg |
| Height | 57 mm |
| Width | 148 mm |
| Length | 286 mm |
| Type | Air Filter |
| Filter type | Filter Insert |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.75
Important compatibility info
| Width | 84.5 mm |
| Outer diameter | 136 mm |
| Inner diameter | 27.5 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 112 mm |
| Number of mounting bores | 4 |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Weight | 3.57 kg |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Bearing Type | Rolling Bearing |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (26377)
- 1x Febi Axle Bolt, drive shaft (22462)
- 4x Febi Axle Bolt, drive shaft (26511)
£40.78
Important compatibility info
| Eject Force | 580 N |
| Placement on Vehicle | both sides |
| Length | 403 mm |
| Housing length | 224.5 mm |
| Function | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Stroke | 153 mm |
| Housing Diameter | 19 mm |
| Weight | 0.248 kg |
| Type | Gas Spring, boot/cargo area |
| Mounting points diameter | 18 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Weight | 3.7 kg |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 388 mm |
| Min. Length | 278 mm |
| Pipe Diameter | 80 mm. 70 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.51
Important compatibility info
| Weight | 0.074 kg |
| Height | 30 mm |
| Filter type | Pollen Filter |
| Function | Filter, cabin air |
| Length | 199 mm |
| Width | 178 mm |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.84
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 4.665 kg |
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 337 mm |
| Min. Length | 280 mm |
| Pipe Diameter | 80 mm. 42 mm |
| Mounting points diameter | 25 mm |
| Piston conrod diameter | 14 mm |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Weight | 0.300 kg |
| Placement on Vehicle | Rear Axle |
| Material | FPM (fluoride rubber) |
| Outer diameter | 150.4 mm |
| Thickness | 21.2 mm |
| Inner diameter | 84.6 mm |
| Inner diameter 1 | 102.5 mm |
| Inner diameter 2 | 125.1 mm |
| Type | Shaft Seal, differential |
| Function | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.27
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
| Weight | 1.647 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.61
Important compatibility info
| Weight | 1.24 kg |
| Width | 25 mm |
| Outer diameter | 148 mm |
| Inner diameter | 44 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| for OE number | 12371-0C072 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, manual transmission |
| Function | Mounting, manual transmission |
| Placement on Vehicle | Rear |
| Weight | 0.896 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.36
Important compatibility info
| Outer diameter | 76.5 mm |
| Weight | 0.107 kg |
| Height | 91.5 mm |
| Additional Information 2 | with seal ring |
| Tightening Torque | 25 Nm |
| Bolt Head/Nut Design | Male Hex |
| Extra Description | febi Plus |
| Type | Cap, oil filter housing |
| Function | Cap, oil filter housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.38
Important compatibility info
| Weight | 0.05 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 689 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.07
Important compatibility info
| Weight | 2.648 kg |
| Placement on Vehicle | Left |
| Type | Mounting Bracket, shock absorber mounting (driver cab) |
| Function | Mounting Bracket, shock absorber mounting (driver cab) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.97
Important compatibility info
| Weight | 1.18 kg |
| Material | Metal, Rubber |
| Outer diameter | 158 mm |
| Thickness | 52 mm |
| Inner diameter | 26 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.34
Important compatibility info
| Placement on Vehicle | Front Axle |
| Width | 45 mm |
| Inner diameter | 21.5 mm |
| Function | Mounting, stabiliser bar |
| Weight | 0.05 kg |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.35
Important compatibility info
| Function | Bellow, air suspension |
| Thickness | 110 mm. 292 mm |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| External Thread Size | M16 x 1,5, M10 x 1,5 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 259 mm. 190 mm |
| Weight | 7.8 kg |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.72
Important compatibility info
| Length | 205 mm |
| Weight | 0.24 kg |
| Height | 86 mm |
| Width | 170 mm |
| Additional Information 2 | with pre-filter |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.00
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.108 kg |
| Cable Length | 570 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.30
Important compatibility info
| Outer diameter | 82.2 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Weight | 0.85 kg |
| Width of castor bearing surface | 25.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.22
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 22 mm |
| Weight | 3.066 kg |
| Paired article numbers | 176506 |
| Steering arm type | Control Arm |
| Material | Aluminium |
| Placement on Vehicle | Front Axle Right, Lower, Rear |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.37
Important compatibility info
| Track rollers material | Metal |
| Additional Information 2 | with ball joint |
| Material | Aluminium |
| Placement on Vehicle | Left, Lower Front Axle |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Paired article numbers | 176882 |
| Rod/Strut | Pull Rod |
| Weight | 4.742 kg |
| Cone Size | 22.7 mm |
| Type | Control/Trailing Arm, wheel suspension |
| External Thread Size | M14 x 1,5 |
| Additional Information | with lock nut, with hydro mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.92
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 576 mm |
| Weight | 0.10 kg |
| Type | Brake Hose |
| Function | Brake Hose |
| External Thread Size | M10 x 1 |
| Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.40
Important compatibility info
| Weight | 0.3 kg |
| Placement on Vehicle | Rear Axle Left, Lower, outer, Rear, Rear Axle Right, inner |
| Outer diameter | 44 mm |
| Thickness | 59 mm |
| Inner diameter | 14 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.32
Important compatibility info
| Weight | 0.090 kg |
| Type | Oil Filter |
| Function | Oil Filter |
| Height | 109 mm |
| Additional Information | with gaskets/seals |
| Outer diameter | 72 mm |
| Additional Information 2 | with seal ring |
| Inner diameter | 32 mm |
| Filter type | Filter Insert |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.27
Important compatibility info
| Width | 25 mm |
| Number of Teeth | 145 |
| Weight | 0.984 kg |
| for OE number | 04L 109 119 D S7 |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
| Belts | with rounded tooth profile |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (48289)
- 1x Febi Tensioner, timing belt (170345)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (07022)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (37019)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (181517)
£107.59
Important compatibility info
| Weight | 4.12 kg |
| Outer diameter | 194 mm |
| Thickness | 86 mm |
| Inner diameter | 32 mm |
| Number of Ribs | 8 |
| Parameter | 4PK + 6PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.56
Important compatibility info
| Thickness/Strength 1 | 7 mm |
| Weight | 3.54 kg |
| Placement on Vehicle | Rear Axle |
| Inspection Tag | ECE R90 Approved |
| Outer diameter | 295 mm |
| Width | 58 mm |
| Function | Brake Shoe Set |
| Type | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.31
Important compatibility info
| External Thread Size | M10 x 1,25 |
| Placement on Vehicle | Front Axle Right |
| Length | 58 mm |
| Colour | Black |
| Function | Link/Coupling Rod, stabiliser bar |
| Spanner Size | 17 |
| Paired article numbers | 42078 |
| Rod/Strut | Coupling Rod |
| Weight | 0.24 kg |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.56
Important compatibility info
| Height | 189 mm |
| Outer diameter | 87 mm |
| Filter type | In-Line Filter, with water drain screw |
| Pipe Diameter | 8 mm. 10 mm |
| Function | Fuel filter |
| Type | Fuel filter |
| Weight | 0.385 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.43
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 235 mm |
| Paired article numbers | 43618 |
| Function | Tie Rod End |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M18 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Weight | 1.080 kg |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.56
Important compatibility info
| Weight | 0.045 kg |
| Function | Chain Tensioner, oil pump drive |
| Type | Chain Tensioner, oil pump drive |
| for OE number | 06A 115 130 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.58
Important compatibility info
| Weight | 2.91 kg |
| Placement on Vehicle | Front Axle Left, Rear Axle Left, Front Axle Right, Rear Axle Right |
| Width | 139 mm |
| Outer diameter | 84 mm |
| Inner diameter | 28 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Additional Information 2 | with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| Type | Wheel Bearing Kit |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£130.22
Important compatibility info
| Weight | 3.8 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 44379 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| Type | Ball Joint |
| Weight | 0.26 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.58
Important compatibility info
| Weight | 0.72 kg |
| Placement on Vehicle | Lower, Rear |
| Length | 200 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.77
Important compatibility info
| Voltage | 24 V |
| Operating Mode | Electric |
| Number of Connectors / Ports | 2 |
| Current Strength | 30 A |
| DIN / ISO | 72585 |
| Function | Tilt Pump, driver cab |
| Weight | 3.3 kg |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£516.28
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Outer, Rear Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 43 mm |
| Thickness | 48 mm |
| Inner diameter | 12 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Weight | 0.215 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.22
Important compatibility info
| Fill Medium | Brake Fluid |
| Type | Clutch Booster |
| Function | Clutch Booster |
| Weight | 2.440 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£179.92
Important compatibility info
| Weight | 0.138 kg |
| Placement on Vehicle | Rear Axle |
| Material | FPM (fluoride rubber) |
| Outer diameter | 130 mm |
| Thickness | 26.5 mm |
| Inner diameter | 85 mm |
| Function | Shaft Seal, differential |
| Type | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.59
Important compatibility info
| Weight | 9.0 kg |
| External Thread Size | M22 x 1,5, M10 x 1,5, M16 x 2 |
| Outer diameter | 273 mm. 227 mm |
| Thickness | 130 mm. 480 mm |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.35
Important compatibility info
| Weight | 0.239 kg |
| Additional Information 2 | with retaining strap |
| Length | 337 mm |
| Material | Plastic |
| Colour | Black |
| Cooling Hose | from engine to engine cooler |
| Type | Coolant Pipe |
| Function | Coolant Pipe |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.52
Important compatibility info
| External Thread Size | M22 x 1,5 |
| Spanner Size | 17 |
| Function | Tensioner, timing belt |
| Weight | 0.180 kg |
| Type | Tensioner, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.60
Important compatibility info
| Colour | Black |
| Spanner Size | 17 |
| Length | 63 mm |
| Material | Steel |
| Placement on Vehicle | Rear Axle, Front Axle |
| Rims | for light alloy rims |
| Thread Length | 19 mm |
| Bolt Head/Nut Design | Male Hex |
| Quality/ Grade | 9.8 |
| Shaft Length | 23 mm |
| Wheel Fastening | Ball seat A/G |
| Function | Wheel Bolt |
| Screw length below head | 48 mm |
| External Thread Size | M14 x 1,5 |
| Outer diameter | 24.8 mm |
| Weight | 0.087 kg |
| Type | Wheel Bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.84
Important compatibility info
| Wire Diameter | 12.8 mm |
| Placement on Vehicle | Front Axle |
| Length | 362 mm |
| Function | Suspension Spring |
| Number of Coils | 4.8 |
| Weight | 2.02 kg |
| Type | Suspension Spring |
| Outer diameter | 156 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Outer diameter | 104 mm |
| Inner diameter | 52 mm |
| Function | Mounting, stabiliser bar |
| Weight | 0.707 kg |
| Placement on Vehicle | Front Axle |
| Length | 77 mm |
| Material | Rubber/Metal |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.99
Important compatibility info
| Function | Brake Hose |
| Length | 280 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 0.1 kg |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.69
Important compatibility info
| Outer diameter | 813 mm |
| Thickness | 108 mm |
| Operating Mode | Electric |
| Number of Connectors / Ports | 6 |
| Function | Fan, engine cooling |
| Weight | 14.5 kg |
| Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£1,034.05
Important compatibility info
| Voltage | 12 V |
| Operating Mode | Electric-pneumatic |
| Number of Connectors / Ports | 2 |
| Weight | 0.070 kg |
| Type | Boost Pressure Control Valve |
| Function | Boost Pressure Control Valve |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.46
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023