Important compatibility info
Wheel Sided Joint Diameter | 80.9 mm |
ABS Ring Diameter | 81 mm |
Additional Information 2 | with screw |
Placement on Vehicle | Front Axle Right |
Min. Length | 610 mm |
Mounting bores distance | 6 mm |
Weight | 6.494 kg |
Bolt Hole Circle Diameter | 104.1 mm |
Bore Diameter | 11 mm |
External Teeth, Wheel Side | 38 |
Thread Size | M16 x 1,5 |
Transmission-side joint diameter | 81.5 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Material | Rubber/Metal |
Additional Information | with gasket/seal |
Weight | 0.95 kg |
Number of Wings | 6 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Wheel Bearing Kit |
Additional Information | with fastening/mounting material |
Outer diameter 1 | 73 mm |
Type | Wheel Bearing Kit |
Outer diameter 2 | 139 mm |
Weight | 3.880 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 37.5 mm |
Outer diameter | 87 mm |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Inner diameter | 29 mm |
Bearing Type | Angular Ball Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (173917)
Important compatibility info
Bore Diameter | 40 mm |
Rod/Strut | Guide Rod |
Additional Information | with rubber-metal mounts |
Diameter | 1 mm |
Length | 420 mm |
Placement on Vehicle | Rear Axle |
Weight | 5.900 kg |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.27 kg |
Material | Cast Aluminium |
Number of Teeth | 6 |
Number of Wings | 6 |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Rubber |
Type | Water Pump, engine cooling |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | from 2nd idler arm to the controlled rear axle |
Internal Thread Size | M30 x 1,5 RHT, M30 x 1,5 LHT |
Cone Size | 30 mm |
External Thread Size | M24 x 1,5 |
Function | Centre Rod Assembly |
Pipe Diameter | 40 mm |
Rod/Strut | Push Rod |
Outer diameter | 40 mm |
Length | 495 mm |
Weight | 5.72 kg |
Additional Information | with castellated nut and split pins |
Driver Position | for left-hand/right-hand drive vehicles |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.169 kg |
Function | Sensor, boost pressure |
Type | Sensor, boost pressure |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.8 kg |
Placement on Vehicle | Front Axle |
Length | 996 mm |
Rod/Strut | Push Rod |
Cone Size | 30 mm |
Pipe Diameter | 38 mm |
Function | Centre Rod Assembly |
Internal Thread Size | M30 x 1,5 RHT |
External Thread Size | M24 x 1,5 |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing Diameter | 18 mm |
Placement on Vehicle | both sides |
Housing length | 306 mm |
Piston conrod diameter | 8 mm |
Mounting points diameter | 16.5 mm |
Length | 556 mm |
Eject Force | 575 N |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Stroke | 179 mm |
Weight | 0.2 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Paired article numbers | 193014 |
Weight | 0.36 kg |
Type | Lens, tail light assembly |
Function | Lens, tail light assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M24 x 1,5 |
Weight | 5.940 kg |
Placement on Vehicle | Front Axle |
Length | 590 mm |
Rod/Strut | Push Rod |
Cone Size | 30 mm |
Pipe Diameter | 38 mm |
Function | Centre Rod Assembly |
Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 430 mm |
Outer diameter | 480.5 mm |
Width | 22 mm |
Weight | 5.500 kg |
Number of Teeth | 158 |
Function | Ring Gear, flywheel |
Type | Ring Gear, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Additional Information 2 | with nut |
Thread Size | M16x1,5 |
Bolt Hole Circle Diameter | 94 mm |
Wheel Sided Joint Diameter | 89 mm |
Min. Length | 472 mm |
Weight | 4.816 kg |
External Teeth, Wheel Side | 36 |
Function | Drive Shaft |
Type | Drive Shaft |
Transmission-side joint diameter | 74.2 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.170 kg |
Type | Control Valve, camshaft adjustment |
Extra Description | febi Plus |
Function | Control Valve, camshaft adjustment |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.112 kg |
Number of Connectors / Ports | 2 |
Function | Control Valve, camshaft adjustment |
Extra Description | febi Plus |
for OE number | 1028A109 |
Type | Control Valve, camshaft adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Electric |
Additional Information | with adjuster |
Number of Connectors / Ports | 8 |
Type | Door Lock |
Extra Description | febi Plus |
Placement on Vehicle | Left Front |
Paired article numbers | 179672 |
Function | Door Lock |
Weight | 0.627 kg |
Lock System | with double sealing |
Driver Position | for right-hand drive vehicles |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.559 kg |
Placement on Vehicle | Front Axle Right, Lower, Rear |
Material | Cast Steel |
Inner diameter | 14 mm |
Steering arm type | Control Arm |
Paired article numbers | 44981 |
Cone Size | 26.8 mm. 23.2 mm |
Function | Control/Trailing Arm, wheel suspension |
External Thread Size | M14 x 1,5 |
Additional Information 2 | with ball joint, with rubber mount |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Additional Information | with rubber mounts |
Paired article numbers | 179807 |
Placement on Vehicle | Left, Front Axle |
Material | Sheet Steel |
Additional Information 2 | with ball joint |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Weight | 3.259 kg |
Cone Size | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 174778 |
Cone Size | 23.7 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
External Thread Size | M16 x 1,5 |
Placement on Vehicle | Front Axle Left, Lower, Front |
Weight | 2.658 kg |
Material | Aluminium |
Additional Information 2 | with ball joint, with bearing |
Steering arm type | Control Arm |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.94 kg |
Placement on Vehicle | Front Axle Left, Lower, Front |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 30517 |
Function | Control/Trailing Arm, wheel suspension |
Rod/Strut | Pull Rod |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with bearing, with screw |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right Front |
Additional Information | without electric motor |
Operating Mode | Electric |
Type | Window Regulator |
Weight | 1.4 kg |
Paired article numbers | 177821 |
Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
Max. Length | 300 mm |
Shock Absorber Mounting Type | Top eye, Bottom Yoke |
Weight | 3.46 kg |
Operating Mode | Mechanical |
Min. Length | 210 mm |
Pipe Diameter | 92 mm. 45 mm |
Mounting points diameter | 14 mm |
Piston conrod diameter | 13 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.288 kg |
Placement on Vehicle | Front Axle Left, Lower, Front |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 47733 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bolts/screws |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (44518)
- 1x Febi Bolt, control arm (40158)
- 2x Febi Washer (21558)
- 1x Febi Nut (21557)
Important compatibility info
Number of Teeth | 111 |
Surface | Coated |
Width of castor bearing surface | 19 mm |
Weight | 1.287 kg |
Width | 17 mm |
Belts | with rounded tooth profile |
for OE number | 16 06 368 S1 |
Type | Water Pump & Timing Belt Kit |
Function | Water Pump & Timing Belt Kit |
Water pump impeller material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (14115)
- 1x Febi Water Pump, engine cooling (24333)
Important compatibility info
Weight | 3.42 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Outer diameter | 147 mm |
Thickness | 85 mm |
Inner diameter | 35 mm |
Number of Holes | 5 |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (47315)
Important compatibility info
Placement on Vehicle | Left Front |
Operating Mode | Electric |
Paired article numbers | 177819 |
Weight | 1.4 kg |
Type | Window Regulator |
Function | Window Regulator |
Additional Information | without electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 27946 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 4.32 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Inner diameter 1 | 12 mm |
Bore Diameter | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.14 kg |
Placement on Vehicle | Front Axle Right |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 42291 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts, with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 55 mm |
Outer diameter | 67 mm. 137 mm |
Inner diameter | 25 mm |
Bolt Hole Circle Diameter | 114 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Weight | 2.68 kg |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 450 mm |
Thickness | 120 mm |
Number of Connectors / Ports | 2 |
Rated Power | 400 W |
Number of Wings | 6 |
Function | Fan, engine cooling |
Weight | 2.67 kg |
Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.14 kg |
Placement on Vehicle | Front Axle Left |
Material | Sheet Steel |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Additional Information 2 | with ball joint |
Paired article numbers | 42292 |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts, with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.72 kg |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Material | Sheet Steel |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.080 kg |
Placement on Vehicle | Rear Axle |
Material | Plastic |
Colour | Black |
Number of Connectors / Ports | 6 |
Function | Sensor, headlight levelling |
Type | Sensor, headlight levelling |
Voltage | 5 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.980 kg |
Placement on Vehicle | Front Axle Right, Front |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 21620 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount |
Cone Size 2 | 20 mm |
Cone Size | 17 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (21517)
Important compatibility info
Piston Diameter | 19.1 mm |
Placement on Vehicle | Rear Axle |
Width | 40 mm |
Outer diameter | 200 mm |
Inspection Tag | ECE R90 Approved |
Mounting Type | Pre-assembled |
Function | Brake Shoe Set |
Weight | 2.195 kg |
Type | Brake Shoe Set |
Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Left |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 178743 |
Weight | 2.0 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
External Teeth, Diff.Side | 26 |
Additional Information 2 | with nut |
Thread Size | M20x1,5 |
Min. Length | 641 mm |
Weight | 5.230 kg |
External Teeth, Wheel Side | 23 |
Function | Drive Shaft |
Type | Drive Shaft |
Transmission-side joint diameter | 74.2 mm |
Wheel Sided Joint Diameter | 79.0 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Drive Shaft |
External Teeth, Diff.Side | 26 |
Min. Length | 675 mm |
Placement on Vehicle | Front Axle Left |
Additional Information 2 | with nut |
Thread Size | M22x1,5 |
External Teeth, Wheel Side | 27 |
Weight | 5.502 kg |
Wheel Sided Joint Diameter | 79.0 mm |
Transmission-side joint diameter | 81.5 mm |
Type | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Requires special tools for mounting |
Weight | 0.465 kg |
Type | Timing Chain |
Function | Timing Chain |
Chain Type | Silent Chain, with chain lock |
Number of Chain Links | 178 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner length 1 | 843 mm |
Function | Cable Pull, manual transmission |
Driver Position | for right-hand drive vehicles |
Inner length 2 | 808 mm |
Weight | 1.402 kg |
Type | Cable Pull, manual transmission |
Outer length 1 | 1185 mm |
Outer length 2 | 1190 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Chain Links | 96 |
Chain Type | Simplex, Closed chain |
Weight | 0.231 kg |
Placement on Vehicle | Upper |
Type | Timing Chain |
Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Minimum thickness | 21 mm |
Outer diameter | 294 mm |
Thickness | 85.5 mm |
Weight | 8.72 kg |
Rotor Style | Internally Vented |
Rim Hole Number | 8 -Hole |
Surface | Coated |
Bolt Hole Circle Diameter | 108 mm |
Mounting points diameter | 10.5 mm |
Function | Brake Disc |
Brake Disc Thickness | 24 mm |
Placement on Vehicle | Rear Axle |
Centering Diameter | 84 mm |
Type | Brake Disc Rotor |
Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.013 kg |
Placement on Vehicle | Rear Axle |
Material | Rubber/Metal |
Outer diameter | 99 mm |
Thickness | 175 mm |
Inner diameter | 21 mm |
Type | Mounting, stabiliser bar |
Function | Mounting, stabiliser bar |
Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Solid |
Weight | 7.5 kg |
Placement on Vehicle | Front Axle |
Bolt Hole Circle Diameter | 118 mm |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Surface | Coated |
Brake Disc Thickness | 16 mm |
Outer diameter | 290 mm |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.239 kg |
Width | 27 mm |
Outer diameter | 65 mm |
Function | Tensioner Pulley, timing belt |
Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.08 kg |
Rotor Style | Internally Vented |
Rim Hole Number | 5 -Hole |
Placement on Vehicle | Rear Axle |
Outer diameter | 300 mm |
Thickness | 35.9 mm |
Brake Disc Thickness | 22 mm |
Minimum thickness | 20 mm |
Bolt Hole Circle Diameter | 112 mm |
Centering Diameter | 68 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 72.5 mm |
Number of Ribs | 6 |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Weight | 0.86 kg |
Width of castor bearing surface | 29 mm |
Type | Belt Tensioner, v-ribbed belt |
for OE number | 2 111 716 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 223 mm |
Outer diameter | 40 mm. 55 mm |
Function | Repair Kit, kingpin |
Weight | 4.666 kg |
Extra Description | ProKit |
Type | Repair Kit, kingpin |
Additional Information 2 | with rolling bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (10557)
Important compatibility info
Piston conrod diameter | 22 mm |
External Thread Size | M14 x 1,5 |
Type | Shock Absorber |
Placement on Vehicle | Front Axle Right, Front Axle Left |
Min. Length | 349 mm |
Shock Absorber Type | Gas Pressure |
Shock Absorber System | Twin-Tube |
Pipe Diameter | 54 mm. 38 mm |
Shock Absorber Mounting Type | Top pin, bottom steering knuckle |
Weight | 3.772 kg |
Max. Length | 539 mm |
Function | Shock Absorber |
Shock Absorber Design | Suspension Strut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.028 kg |
Placement on Vehicle | Right, Upper |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023