Mountings & Bushes Mountings & Bushes
Fits SEAT IBIZA Mk II (6K1) 2.0 i
(1993)

Part number: 819003010
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: inner
Bearing/Mounting Type Rubber Mount
Width 33 mm
Inner diameter 17 mm
Type Mounting, stabiliser bar
Function Mounting, stabiliser bar
FAG 819003010 Anti Roll Bar Bush
ONLY
£4.14
Quantity:
Part number: 09095
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Construction Year to: 12/1994; Vehicle Identification Number (VIN) to: ******6K*ZR040000; Vehicle Identification Number (VIN) to: ******6K*ZR550000
Placement on Vehicle Front Axle Left, Front Axle Right
Rod/Strut Coupling Rod
Function Bushing, stabiliser coupling rod
Type Bushing, stabiliser coupling rod

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 09095 Anti Roll Bar Bush
ONLY
£4.65
Quantity:
Material Rubber/Metal
Outer diameter 33 mm. 36 mm
Thickness 54 mm
Inner diameter 12 mm
Placement on Vehicle Front Axle Left, Front, Front Axle Right
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm

Additional Information

Technical Information

Please tighten the mounting bolts with the wheels on the ground.


General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 07856 Wishbone / Control / Trailing Arm Bush
ONLY
£4.77
Quantity:
Diameter 12 mm. 32 mm
Length 54 mm
Type Mounting, control/trailing arm
Function Mounting, control/trailing arm
Placement on Vehicle Lower, Front, Front Axle Left, Front Axle Right
Paired article numbers NST8162
NAPA NST8162 Wishbone / Control / Trailing Arm Bush
ONLY
£4.86
Quantity:
Part number: 09519
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Engine Code: 2E; or; Engine Code: AGG; Vehicle Identification Number (VIN) to: ******6K*V*143400; Stabiliser Bar Diameter: 20 mm
Length 33 mm
Material Rubber
Inner diameter 17 mm
Placement on Vehicle Front Axle
Function Mounting, stabiliser bar
Type Mounting, stabiliser bar

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 09519 Anti Roll Bar Bush
ONLY
£4.87
Quantity:
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Diameter 12 mm. 32 mm
Length 54 mm
Placement on Vehicle Lower, Front, Front Axle Left, Front Axle Right
Manufacturer AUDI SEAT SKODA VOLKSWAGEN
Paired article numbers AST8162
Apec AST8162 Wishbone / Control / Trailing Arm Bush
ONLY
£4.88
Quantity:
Placement on Vehicle Front Axle Left, Front Axle Right
Type Bushing, stabiliser bar
Function Bushing, stabiliser bar
NAPA NST8553 Wishbone / Control / Trailing Arm Bush
ONLY
£4.90
Quantity:
Placement on Vehicle Front Axle Left, Front Axle Right
Type Bushing, stabiliser bar
Function Bushing, stabiliser bar
Apec AST8553 Wishbone / Control / Trailing Arm Bush
ONLY
£4.91
Quantity:
Part number: 19050
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Stabiliser Bar Diameter: 20 mm; or; Stabiliser Bar Diameter: 21,5 mm
Placement on Vehicle Front Axle
Material Rubber
Inner diameter 19 mm
Function Mounting, stabiliser bar
Type Mounting, stabiliser bar

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 19050 Anti Roll Bar Bush
ONLY
£5.00
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Lower; Fitting Position: Front
Outer diameter 1 33 mm
Thickness/Strength 1 54 mm
Inner diameter 1 12 mm
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Delphi TD239W Wishbone / Control / Trailing Arm Bush
ONLY
£5.11
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Left; Fitting Position: Right; Fitting Position: Lower; Fitting Position: Front
Inner diameter 12.1 mm
Diameter 32.4 mm
Length 54 mm
Function Mounting, control/trailing arm
Only in connection with FCA5817, FCA5818, FCA5819, FCA5820, FCA5912, FCA5913, FCA6111, FCA6112, FCA6113, FCA6114, FCA6457, FCA6458, FCA6459, FCA6460, FCA6735, FCA6736, FCA6737, FCA6738
Type Mounting, control/trailing arm
Paired article numbers FSK6009
Replaces BSK5935
Borg & Beck BSK6009 Wishbone / Control / Trailing Arm Bush
ONLY
£5.17
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Left; Fitting Position: Right; Fitting Position: Lower; Fitting Position: Front
Only in connection with FCA5817, FCA5818, FCA5819, FCA5820, FCA5912, FCA5913, FCA6111, FCA6112, FCA6113, FCA6114, FCA6457, FCA6458, FCA6459, FCA6460, FCA6735, FCA6736, FCA6737, FCA6738
Length 54 mm
Inner diameter 12.1 mm
Diameter 32.4 mm
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Replaces FSK5935
Paired article numbers FSK6009
First Line FSK6009 Wishbone / Control / Trailing Arm Bush
ONLY
£5.17
Quantity:
Part number: 181917
Function Mounting, stabiliser bar
Placement on Vehicle Rear Axle
Type Mounting, stabiliser bar
Inner diameter 16.2 mm
Thickness 30 mm
Material Rubber
Width 30 mm
Length 48 mm

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 181917 Anti Roll Bar Bush
ONLY
£5.35
Quantity:
Part number: 14954
Placement on Vehicle Rear Axle, Lower
Material Rubber/Metal
Function Suspension Strut Support Mount
Type Suspension Strut Support Mount
Additional Information 2 without ball bearing

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 14954 Top Strut Mounting
ONLY
£5.43
Quantity:
Part number: 14956
Material Rubber/Metal
Placement on Vehicle Rear Axle, Upper
Function Suspension Strut Support Mount
Type Suspension Strut Support Mount
Additional Information 2 without ball bearing

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 14956 Top Strut Mounting
ONLY
£5.57
Quantity:
Part number: 08384
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Engine Code: 2E; Vehicle Identification Number (VIN) to: ******6K*ZR082400; Vehicle Identification Number (VIN) to: ******6K*ZR599964
Thickness 84 mm
Inner diameter 19 mm
Placement on Vehicle Front Axle Left, Front Axle Right
Function Rubber Buffer, suspension
Type Rubber Buffer, suspension
Material Rubber
Replaces 07299

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 08384 Bump Stop
ONLY
£6.05
Quantity:
Placement on Vehicle Front Axle
Width 28 mm
Material Rubber
Function Mounting, steering gear
Type Mounting, steering gear
for OE number 191 419 883

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 02903 Steering Gear Mounting
ONLY
£6.11
Quantity:
Part number: 18358
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Engine Code: 2E; Vehicle Identification Number (VIN) from: ******6K*ZR082401; Vehicle Identification Number (VIN) from: ******6K*ZR599965; or; Engine Code: AGG
Placement on Vehicle Front Axle
Thickness 83 mm
Material PU (Polyurethane)
Function Rubber Buffer, suspension
Type Rubber Buffer, suspension
for OE number 357 412 303 F

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 18358 Bump Stop
ONLY
£6.14
Quantity:
Placement on Vehicle Front Axle Left, Lower, Rear, Front Axle Right
Material Rubber/Metal
Thickness 41 mm
Inner diameter 17 mm
Outer diameter 1 60 mm
Outer diameter 2 69 mm
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm

Additional Information

Technical Information

Please tighten the mounting bolts with the wheels on the ground.


General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 07857 Wishbone / Control / Trailing Arm Bush
ONLY
£6.29
Quantity:
Part number: NKM1229
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Rear Axle
Function Suspension Strut Support Mount
Type Suspension Strut Support Mount
Placement on Vehicle Rear Axle
NAPA NKM1229 Top Strut Mounting
ONLY
£6.38
Quantity:
Part number: AKM1229
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Rear Axle
Placement on Vehicle Rear Axle
Type Suspension Strut Support Mount
Function Suspension Strut Support Mount
Apec AKM1229 Top Strut Mounting
ONLY
£6.44
Quantity:
Material Aluminium, Rubber/Metal
Outer diameter 60 mm. 27 mm
Thickness 41 mm
Inner diameter 17 mm
Placement on Vehicle Front Axle Left, Lower, Rear, Front Axle Right
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm

Additional Information

Technical Information

Please tighten the mounting bolts with the wheels on the ground.


General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 07847 Wishbone / Control / Trailing Arm Bush
ONLY
£6.70
Quantity:
Material Rubber/Metal, Aluminium
Outer diameter 60 mm. 27 mm
Thickness 41 mm
Inner diameter 17 mm
Placement on Vehicle Front Axle Left, Lower, Rear, Front Axle Right
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Additional Information 2 with mounting sleeve

Additional Information

Technical Information

Please tighten the mounting bolts with the wheels on the ground.


General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

  • 1x Febi Mounting, control/trailing arm (07847)
  • 1x Febi Sleeve, control arm mounting (03544)
Febi 14530 Wishbone / Control / Trailing Arm Bush
ONLY
£6.80
Quantity:
Placement on Vehicle Front Axle Left, Front Axle Right
Width 14 mm
Material Plastic
Outer diameter 45 mm
Inner diameter 14 mm
Bearing Type Angular Ball Bearing
Type Rolling Bearing, suspension strut support mount
Function Rolling Bearing, suspension strut support mount

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Blue Print ADG080331 Strut Anti Friction Bearing
ONLY
£6.81
Quantity:
Width 13.5 mm
Material Plastic
Outer diameter 45 mm
Inner diameter 14 mm
Bearing Type Angular Ball Bearing
Placement on Vehicle Front Axle Left, Front Axle Right
Function Rolling Bearing, suspension strut support mount
Type Rolling Bearing, suspension strut support mount

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 01111 Strut Anti Friction Bearing
ONLY
£6.81
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: inner; Fitting Position: Lower; Fitting Position: Front
Replaces 5104703; 5104706; 5104709
Quantity Unit Piece
Bearing/Mounting Type Rubber-Metal Mount
Type Mounting, control/trailing arm
Function Mounting, control/trailing arm
Net weight 0.13 kg
NK 5104720 Wishbone / Control / Trailing Arm Bush
ONLY
£6.81
Quantity:
Part number: 18379
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Engine Code: 2E; Vehicle Equipment: for vehicles without reinforced shock absorbers; or; Engine Code: AGG; Suspension: for vehicles without sports suspension
Placement on Vehicle Rear Axle
Thickness 100 mm
Material PU (Polyurethane)
Function Rubber Buffer, suspension
Type Rubber Buffer, suspension

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 18379 Bump Stop
ONLY
£6.93
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle
Bearing/Mounting Type Rubber Mount
Inner diameter 20 mm
Function Mounting, stabiliser bar
Type Mounting, stabiliser bar
Quinton Hazell EMB7092 Anti Roll Bar Bush
ONLY
£7.03
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Lower Front Axle; Fitting Position: Rear
Function Sleeve, control arm mounting
Type Sleeve, control arm mounting
Quinton Hazell TSA208RK Wishbone / Control / Trailing Arm Bush
ONLY
£7.12
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle
Inner diameter 18 mm
Bearing/Mounting Type Rubber Mount
Function Mounting, stabiliser bar
Type Mounting, stabiliser bar
Quinton Hazell EMB7011 Anti Roll Bar Bush
ONLY
£7.38
Quantity:

Page 1 of 3
Mountings & Bushes

What are mountings and bushes?

Mountings and bushes are components used to attach parts securely in your vehicle. Mountings and bushes are designed to keep their associated parts in place and in many cases provide shock absorption and articulation. There are many locations in a vehicle where mountings and bushes are used, especially where metal parts join together and require a rubber separation to prevent metal-on-metal damage.


How do I choose the correct mounting and bushes?

Finding the correct mounting and bushes is best done by cross referencing the original part number (OE). Although some of these parts look similar there can be subtle differences which may lead to them either not fitting correctly or failing prematurely. If you are not able to obtain and cross reference the OE part number here are some things to consider when looking for correct replacements:

  • Number of gears (i.e. 5 speed or 6 speed, manual, automatic etc)

  • Factory modifications (sports pack, levelling suspension, specific shape etc)

  • Transmission type / transmission code

  • Vehicle manufacture date (this is not the date the vehicle was registered but the date it was made)

  • Engine number sequence (up to or after as specific number/letter

  • VIN (chassis number) sequence (up to or after as specific number/letter

  • Standard, hydraulic or electric mounting

  • Diameter or other significant measure


What brand of mountings and bushes should I choose?

There are a number of brands available in the aftermarket. Some brands such as Bosch manufacture mountings and bushes for the original car brands however there are other high quality brands that meet or exceed the original specifications. Brands such as Blue Print, Delphi, Borg & Beck and Febi offer long warranties to take the worry out of choosing a quality part.


How can I tell my mountings or bushes needs replacing?

Often a visual check will show if the mounting or bushes need to be replaced. We always recommend you speak to a qualified mechanic if you are not sure. Some of the symptoms of a faulty mounting or bushes are:

  • There is a knocking noise when turning or going over bumps

  • The rubber has become split/damaged on the mounting or bush

  • There is loose play around the mounting or bush

  • There is fluid leaking from the mounting (hydraulic)

  • The mounting is corroded


Your feedback more
Trusted reviews more
Secure payments more
Simple returns more