Proud to be a UK-based company
Contact usAbrasive Discs & Brushes
Tools Sub-Categories
invoice Page 6 of 9
Results 51 - 60 of 85
Part number: WCP151T
Important compatibility info
| Title | ABRACS Proflex Extra Thin Flat Cutting Disc 115 x 1.0 x 22mm (Tin) |
Additional Information
ABRACS Proflex Extra Thin Flat Cutting Disc 115 x 1.0 x 22mm (Tin)
- Pack of Tin of 10
- Max RPM 13,300
- O.D. x Thickness 115 x 1.0 x 22 mm
- Suitable for use on an angle grinder
- For use on stainless steel, sheet metal, mild steel and high grade steel
- Manufactured to European quality standards
- Manufactured to European quality standards. For use on stainless steel, sheet metal, mild steel and high grade steel. Suitable for use on an angle grinder.
ONLY
£14.11
£14.11
Part number: 3151
Important compatibility info
| Material | Steel |
| Type | Brush Disc, drill |
| RPM to | 4.500 1/min |
| Function | Brush Disc, drill |
| Wheel Diameter | 50 mm |
| Wheel Material | Textile |
Additional Information
General Information
Buffing Wheel with Quick Chuck - 50mm Buffing Wheel with Quick Chuck - 50mm.
- Maximum 4500 rpm
- Allows speedy switch from drill to driver
- For use with Laser's quick change facility for speedy switch from drill to driver
ONLY
£13.80
£13.80
Part number: WAF424N
Important compatibility info
| Title | ABRACS Flap Wheels 6mm shaft 40x20mm P40 |
Additional Information
ABRACS Flap Wheels 6mm shaft 40x20mm P40
- Pack of 5
- Suitable for use on mild steel, construction steel, alloy steel and iron
- Designed for use with electric drills and air tools
- Ideal for deburring and general cleaning applications
- Ideal for deburring and general cleaning applications. Designed for use with electric drills and air tools. Suitable for use on mild steel, construction steel, alloy steel and iron.
ONLY
£13.66
£13.66
Part number: 66623303783
Important compatibility info
| Title | Stripping Disc - Blaze - Depressed Centre - 115mm |
Additional Information
However well you look after your car, there will always be one or two small dents or scratches in the bodywork. These may have been caused by flying stones, minor accidents or rusting. In order to repair these you will need to sand back and blend in the damage in preparation for re-spraying. To make sure you are using the best quality sanding products choose one from the Saint Gobain Abrasives range, Norton. As part of this range they supply a selection of stripping discs for rapid stripping of all coatings. They are a 3D open web structure, prevents clogging & loading with ceramic grain technology. The disc is 115mm in diameter and has a 22mm bore. Saint-Gobain Abrasives, the world’s leading abrasives manufacturer, is the only international supplier of abrasives that manufactures each of the 3 major types of abrasives; Bonded Abrasives, Coated Abrasives, and Diamond products. This is supported by exceptional technology, complete and innovative product lines, an irrefutable reputation for quality and safety, and experienced, committed, passionate people. Norton is a brand with an exceptional heritage and an excellent brand image. It offers a very complete collection of high performance and high value abrasives for use in all industrial markets, in addition to a merchandising line of pre-packaged abrasives, ideal for Distribution & DIY markets.
- Reduces damage to substrate
- For rapid stripping of all coatings
- Blaze SG Ceramic grain technology
- 3D open web structure, prevents clogging & loading
- 22mm bore
- 115mm diameter
ONLY
£13.51
£13.51
Part number: 3146
Important compatibility info
| Title | Wire Brush - Flat Type With Quick Chuck End - 75mm |
| Material | Steel |
| Diameter 1 | 75 mm |
| Surface | Brass-plated |
| Type | Brush Disc, drill |
| Function | Brush Disc, drill |
| Bristle Material | Steel |
| Brush Head Shape | Flat |
Additional Information
General Information
Flat Brush with Quick Chuck End - 75mm Flat Brush with Quick Chuck End - 75mm.
- Always wear eye protection
- Brass plated
- Steel wire
- For use with Laser's quick change facility for speedy switch from drill to driver
ONLY
£11.52
£11.52
Part number: 91450
Important compatibility info
Additional Information
- Time saver
- Precision ground file gives uniform results
- The Coarse is ideal for removing sags and runs on primer or top coat
- Fine pattern removes tiny imperfections
- The Fine easily removes dirt and paint runs from finished paint surfaces
ONLY
£11.39
£11.39
Part number: 63642556833
Important compatibility info
| Title | Rubber Backing Pad - 125mm |
Additional Information
- Backing pad for use with drill mountable discs
- 6mm Spindle Fits Most Drill Chucks
- 125mm x 12mm x 6mm spindle
ONLY
£11.03
£11.03
Part number: 63642585443
Important compatibility info
| Title | Flap Wheel - 40mm x 20mm - P80 |
Additional Information
There are many occasions where you will require some sort of abrasive around the house or at work. Will so many different options and suppliers in the market, it can be quite a difficult decision making the right choice. However, Saint Gobain is a world known manufacturer of abrasives and supply a large and diverse range of quality products that you can rely on time and time again. This Aluminium Oxide flap wheel has a cotton backed wheel for fast and aggressive sanding. It’s ideal for sanding contoured metal surfaces, blending welds, deburring and finishing castings. The wheel produces an excellent and uniform finishing result made easier as its flexible, great for those hard to reach areas. Each disc has a wheel size of 40 x 20 P80 (diameter x thickness). Saint-Gobain Abrasives, the world’s leading abrasives manufacturer, is the only international supplier of abrasives that manufactures each of the 3 major types of abrasives; bonded abrasives, coated abrasives, and diamond products. This is supported by exceptional technology, complete and innovative product lines, an irrefutable reputation for quality and safety, and experienced, committed, passionate people.
- Fits standard 6mm diameter chuck
- Flexible for hard to reach areas
- Cotton backed Aluminium Oxide
- Suitable for many different applications
ONLY
£10.61
£10.61
Part number: 63642585439
Important compatibility info
| Title | Flap Wheel - 40mm x 20mm - P40 |
Additional Information
There are many occasions where you will require some sort of abrasive around the house or at work. Will so many different options and suppliers in the market, it can be quite a difficult decision making the right choice. However, Saint Gobain is a world known manufacturer of abrasives and supply a large and diverse range of quality products that you can rely on time and time again. This Aluminium Oxide flap wheel has a cotton backed wheel for fast and aggressive sanding. It’s ideal for sanding contoured metal surfaces, blending welds, deburring and finishing castings. The wheel produces an excellent and uniform finishing result made easier as its flexible, great for those hard to reach areas. Each disc has a wheel size of 40 x 20 P40 (diameter x thickness). Saint-Gobain Abrasives, the world’s leading abrasives manufacturer, is the only international supplier of abrasives that manufactures each of the 3 major types of abrasives; bonded abrasives, coated abrasives, and diamond products. This is supported by exceptional technology, complete and innovative product lines, an irrefutable reputation for quality and safety, and experienced, committed, passionate people.
- Fits standard 6mm diameter chuck
- Flexible for hard to reach areas
- Cotton backed Aluminium Oxide
- Suitable for many different applications
ONLY
£10.43
£10.43
Part number: 91488
Important compatibility info
| Title | Stripe Off Disc With Shank - 6mm |
Additional Information
- Time saver
- For removing stripes, decals, stickers and moulding adhesive
- Max 4000 rpm
- With 6mm shank
- Rubber erasure wheel
ONLY
£10.42
£10.42
Page 6 of 9
Abrasive Discs & Brushes
