Workshop Tools

General Information

Hose Clamp Tool (Bar Type) Hose Clamp Tool (Bar Type).

• Ensures complete clamp
• No sharp edges
• Steel construction with chrome plated
• Suitable for brake and fuel hoses

• Motorcycle fork oil level adjuster
• Syringed hollow filler
• Aluminium level adjuster
• A quick and accurate way of setting and adjusting fork oil levels
• Quick and accurate
• Time saver

General Information

Timing Tool Kit - fits Renault 1.6/2.0/2.3 DCI/ Nissan Timing Tool Kit - fits Renault 1.6/2.0/2.3 DCI/ Nissan.

• OEM Codes: EN48334, EN48332, EN48331, EN48330 Made in Sheffield
• Supplied in metal storage case
• Two crankshaft locking pins are now included to cover for the 16 DCi (Comp G) and 20, 23 DCi (Comp F) Component G - Crankshaft Locking Pin has been added for later M9T 20 and R9M 16 DCi engines
• Timing tool kit for Renault 20DCI chain drive diesel engines fitted to the Megane/ Vel Satis/Espace/Scenic/Trafic/Laguna/Koleos also fitted to the Nissan Qashqai and the Vauxhall/Opel Vivaro Packed in a metal case for storage Application list and OEM

• Simply remove 1/2in.D adaptor to reveal 3/8in.D
• Legs manufactured from hardened Chrome Steel (Inside measurement 28mm)
• Can also be tightened using a 21mm socket or spanner
• Removes and tightens oil filters ranging from 635mm to 101mm and driven by 3/8in. or 1/2in. drive accessories

General Information

Tyre Pressure & Depth Gauge

• CE certificated and ROHS compliant.
• Integral tyre tread depth gauge.
• Ranges from 3 - 99 PSI with auto power off function.
• A tyre pressure gauge with PSI, BAR, KPA, KG-cm options.
• Two in one essential tools for the Motorist.

General Information

Oil Filter Wrench - 64.5mm x 14 Flutes x 3/8"D

• 3/8in.D
• Removes filters without damage to the filter housing
• Oil Filter wrench size: 645mm x 14 flutes
• An aluminium Oil Filter Wrench specifically designed for use on Toyota (07-08) 35L V6 and Lexus GS300 (06-) IS250(2006-) IS350(2006-) ES350(2007-) GS350(2007-) GS450H(2007-) LS460(2007-) RX350(2007-) LS600H(2008-)

General Information

Brake Fluid Tester

• PLEASE NOTE - NOT SUITABLE FOR SILICONE BASED DOT 5 FLUID
• Suitable for DOT 3, DOT 4 & DOT 5.1
• Battery supplied
• Colour coded LEDs show level of water
• Quick and simple tool
• Essential safety check
• Identify percentage of water in brake fluid

General Information

Wire Brush 4 Row

• The brush conforms to PAHS standards
• 4 row brush
• Carbon steel wire and a soft grip handle

• Designed to reduce the risk of damaging the motorcycle wheel rims when fitting or removing tyres
• Set of two
• Soft material will not damage the rims
• String line attachment for easy removal

General Information

Manual Pressure Brake Bleeder 2L

• Designed to use with most brake master cylinder reservoirs measuring 1in. to 3in.
• Is supplied along with a European adaptor
• 2 litre container supplied with European adaptor
• Easy to use and designed for single handed operation
• Manual brake bleeder

General Information

Washer Jet Tool (CD) Washer Jet Tool (CD).

• Other end gives a firmer tool for redirecting onto the windscreen
• One screw end reveals fine pin point for cleaning out
• Knurled body gives added grip, complete with a pocket clip
• Suitable for cleaning out blocked washer jets and redirecting
• Double ended washer jet tool

• 4821A - Water Pump Pliers - 16in.
• 4820A - Water Pump Pliers - 10in.
• 4819 - Side Cutters - 6in.
• 4817 - Long Nose Pliers - 6in.
• A new range of chromed nickel steel pliers with serrated jaws - spring loaded and covered by TUV/GS certificates.

• Full instructions are included
• The tool works with an air compressor at 4-7 BAR and on a maximum diameter of 110mm
• This CV Bootgun is designed for stretching flexible CV Boots on to the drive shaft assemblies of automotive vehicles

• Spring loaded trigger
• Nickel plated nozzle
• Use with air compressor
• Quick removal of dust and particles
• 100mm (4in.) lance

General Information

Special Socket 24mm - VAG Special Socket 24mm - VAG.

• Chrome Molybdenum
• Introduced primarily for removing the drive axles
• Special socket
• This Bi-Hex Socket has been introduced primarily for removing the drive axle screw on Volkswagen Touran ( 06-) and Passat

General Information

Aluminium Repair System Aluminium Repair System.

• Can be used with standard heat source
• Complete with tinning brush & 5 aluminium rods
• This product will repair any damage to aluminium parts quickly and effectively without using flux or chemicals
• Using a standard heat source these aluminium brazing rods can repair damage to most aluminium parts without using flux or chemicals Brazes all Aluminium Alloys, including Zinc, Magnesium, Pot Metal and Cast Aluminium

• Manufactured from Chrome Molybdenum
• Volkswagen Audi Group, BMW, Ford, Vauxhall/Opel, Volvo and Rover
• Suitable for Mercedes-Benz (C & E class 602,605,606)
• Specifically for removing and installing deep seated Lambda sensors

• Manufactured from Chrome Molybdenum
• Available in range 22mm - 70mm
• Deep Impact socket
• Part of a range of Deep Impact Sockets in 1in. drive

• Manufactured from Chrome Molybdenum
• Available in range 22mm - 70mm
• Deep Impact socket
• Part of a range of Deep Impact Sockets in 1in. drive

• Part of a range of Deep Impact Sockets in 1in. drive
• Deep Impact socket
• Available in range 22mm - 70mm
• Manufactured from Chrome Molybdenum