Workshop Tools

General Information

Cable End Shroud with Grip Collar - 35mm. Cable End Shroud with Grip Collar - 35mm

• 35mm diameter x 130mm length
• Also available: 15mm x 100mm length and 25mm x 110mm length
• Flexible gripping collar prevents damage to the cable insulation
• Push on shrouds for un-insulated cable ends - 1000v insulated
• Will also fit over cable connectors and lugs

• 15° offset box for better accessibility.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Universal Joint provides easier access in hard to reach spaces to get every job done, both in the garage and on the jobsite.
• Ball detent securely holds the socket to the adapter.
• Chrome finish for optimal resistance to corrosion and rust.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Integrated wire cutter that can cut up to 1/4in. bolt
• Nickel-plated finish for corrosion resistance
• Durable forged CR-V jaws with induction hardened teeth for ulitimate durability
• Complies with ASME specs B107.24
• Pull-up release allows for one-handed opening when locked
• Tested to exceed 2,500 lbs. jaw pressure
• Hard rubber grip on handle helps prevent hand slippage

• NCCJ500-W - Wheel Replacement
• NCCJ500-S - Saddle Replacement
• NCCJ500-P - Hydraulic Pump Replacement
• NCCJ500-FP - Foot Pedal Replacement

• 15° offset box for better accessibility.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.

General Information

Deep Socket - Air Impact 1/2"D 36mm Deep Socket - Air Impact 1/2"D 36mm.

• 1/2in. drive
• 36mm drive depth, 56mm internal depth, 51mm external Diameter
• Manufactured from Chrome Vanadium
• For use with air impact tools

General Information

Clamp for Strut Insert Pistons - 60mm Bolts Clamp for Strut Insert Pistons - 60mm Bolts.

• Very useful when working with struts that are equipped with strong internal springs (tension stop springs) that pull the strut shaft partly into the strut
• Clamp for Strut insert pistons with 60mm bolts
• Kit includes 60mm long bolts (68mm including head)
• Locks the Mcpherson strut in its fully extended position

• 22mm
• 3/8in.D
• For heated and non-heated Lambda Sensors
• Applications include Mitsubishi, Nissan, GM and VAG
• Window in socket allows wires to sensors to be bypassed

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Polishing sponge soft. Extremely soft sponge with fine foam structure. For fine polishing with polishing creams / wax compounds to remove very fine scratches and holograms (swirls)

• Metal housing for increased durability.
• Ergonomic handle provides comfortable and secure grip.
• High contrast size callouts for quick and easy identification.
• Foldable keys enable easy access & storage solution.

• Torx sizes from T9 to T40
• Metal housing for increased durability.
• Ergonomic handle provides comfortable and secure grip.
• High contrast size callouts for quick and easy identification.
• Foldable keys enable easy access & storage solution.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Sizes: 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm
• Keys feature long hex arm for access in hard to reach areas. Short hex arm for tight fit access and color coded hex key holder for convenient storage and identification.
• Rugged black phosphate finish for long life and added strength

• Comfort grip l-handles for secure grip & more torque, long arm for better angle of entry in hard to reach areas & stubby hex shank on side handle for tight fit access

• CR-V alloy steel for long lasting durability.
• Worldwide patent.
• Meet DIN torque spec.
• Processing without tolerance to true present the 90 teeth 4 degrees of operation function.
• Nickel chrome plated for long lasting protection.
• Extra long beam offers extreme reach and loads of leverage.
• 6-point box ends snugly fix hex-shaped fastener heads and resist slipping off while you work

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• Qty: 50
• 45 Degree Angle Profile
• Metric Thread