Workshop Tools

• Simple one way pump action
• Syphons petrol or diesel
• Drains radiators
• Length: 1650mm
• Pipe diameter: 1/4in.

General Information

Pneumatic Brake Caliper Rewind Tool - 3/8"D

• A pneumatic/air tool for brake caliper piston rewind
• Suitable for pin type or 3/8in.drive adaptors
• For left and right handed threaded piston

General Information

Timing Pins - Renault engines. Timing Pins - Renault engines

• OEM codes MOT 1489/1054/1430, Mercedes 607 589 01 15 00, 607 589 00 15 00
• For Flywheel locking on Mercedes Benz Citan use Laser 3203 (starter motor removal required)
• Renault engine code K9K (2002-on), Mercedes 607951 (K9K) (2012 on)
• Popular with the Nissan Micra 15 Dci
• Crankshaft and Camshaft timing pin set for Renault 15 and 19 DCi engines fitted to Laguna, Kangoo and Clio models

General Information

Diesel Injector Puller

• Saves time and money when injectors are difficult to remove
• Incorporating a slide hammer
• Presented in a handy blow mould case
• Diesel Injector Puller with M8/M12/M14 adaptors Assists removal of stubborn Bosch and Lucas diesel injectors

General Information

Timing Tools - VAG 3cyl 6/12 valve. Timing Tools - VAG 3cyl 6/12 valve

• 6v/12v 12v tools are OEM T10123 x2 and T10121x1 with AZQ/BME Engine codes and 6v require T10120x1 and T1021x1 for AWY/BMD engine codes
• 2 and 3 cylinder
• Timing tools for Volkswagen Lupo and Polo 1.2 litre engines

• These heavy duty CV Boot Clamp Pliers can be used by hand or with the assistance of a power bar and torque wrench if specific torque is required
• PVC dipped handles for comfort
• Suitable for installation of certain clamps on fuel filters, water pumps and other cooling systems

• Applications for motorcycles: Honda 15410 (MM5-003) (MM9-003/013) (MM9-305/405) (MM0-P00/1/3) (MT7-003) and 15412 (MT7-003), Kawasaki 16097 - 1059/1061/3/4/6/7, Yamaha 3FV - 13440-00, 3GH 13440-00/10, Polaris 308 - 4963, Triumph 1050cc 3 cylinder engines
• Also suitable for some motorcycles
• Cup style oil filter wrench suitable for most modern Japanese vehicles including Mazda 6 Also used on Ford Mondeo with MZR engine

General Information

Tyre Tread Depth Gauge

• Range: 0-25mm
• Simple ON/OFF with 1.5V SR44 battery included
• Metric to Imperial measurements
• Large LCD display

General Information

Timing Tools - Land Rover/Jaguar V6. Timing Tools - Land Rover/Jaguar V6

• Camshaft sprocket timing pins 303-1126
• Camshaft Sprocket aligning tool 303-1132
• Flywheel Locking Tools - OEM 303-1117 (Automatic Transmission) 303-1116 (Manual Transmission)
• Engine Code 276D T 2004-2007
• Timing pins for Land Rover Discovery 2.7 TDV6, Range Rover Sport 2.7 TDV6 and Jaguar S Type TDVi with V6 engines with automatic and manual transmissions

General Information

Flywheel Locking Tool. Flywheel Locking Tool

• Flywheel Locking tool OEM 21-168/303-393
• Flywheel Locking tool adaptor (01) 303-393-02
• Flywheel Locking tool adaptor (01) 303-393-01
• Flywheel locking tool for Ford diesel and petrol engines

General Information

Compression Test Adaptor Compression Test Adaptor.

• Also used on Peugeot 207/307 and Renault 12 16 valve
• BMW, Mini, Mercedes-Benz M156 (AMG engine manufactured from 2006 onwards
• This tool is now essential on BMW E90 335i with N54 engines (2006)
• This extra long Compression Test Adaptor is designed to fit 12mm Spark Plugs

General Information

Timing Tool Set 2.0lt TDi PD - VAG Timing Tool Set 2.0lt TDi PD - VAG.

• Tools also available separately
• Full OEM reference and guidance notes included with each set
• Specifically designed for Belt driven diesel engines
• Timing tool kit for VAG 2.0 litre TDI, PD & DOHC engines fitted to Audi A4, Audi A6, Skoda Octavia II, Volkswagen Golf, Jetta and Touran models

Technical Information

Timing Tool Set - Ford/Volvo. Timing Tool Set - Ford/Volvo

• Camshaft Locking Strap now includes OEM 303-376B
• Made in Sheffield
• Also used on Volvo models with 18/20 CHAIN engines
• Also included in the kit is 303-748 (21-259) for Focus C-Max 16, 14, 16 and Fiesta Fusion 124 & 14
• This new camshaft setting bar updates the existing 3096 and is suitable for all the applications including the latest HWDA, HWDB & HXDA engines

• It has a 14mm Bi-Hex x 65mm 12pt 3/8in. drive and is made from Chrome Vanadium. Also used on other manufacturer's fitted with 8mm Bosch spark plugs such as:
• Renault 1.2 16v
• Peugeot 207 and 307
• Mercedes-Benz M156 engine
• BMW Mini
• BMW E90335I N54 engine 2006
• This specially designed - thin walled Spark Plug Socket with a spring clip to hold the plug is used on most Citroen vehicles

• One litre capacity with 0
• Ideal for gear boxes, differentials, lawn mowers, chain saws, outboard motors and suitable for oils, automatic transmission fluids, brake fluids and general purpose cleaners
• This handy mini pump makes all top up jobs easy

• Deep impact socket
• Manufactured in Chrome Molybdenum for strength
• Suitable for use on Peugeot Ball Joint Sockets

General Information

Engine Timing Tool Kit - Vauxhall/Opel;, Engine Timing Tool Kit - Vauxhall/Opel.;

• Zafira-B 1.6 16v with engines Z16LET & Z16XEP 2003-2007
• Meriva (VXR)
• Astra-H
• Astra-G
• Opel
• Vauxhall
• Camshaft alignment pin (KM 6340) and tensioner locking pin (KM 6333) for:

• Offset drive for easy access
• For use on General Motors models plus Saab 95 TiD (OEM 8 39 5808)
• 3/8in.Drive
• Specially designed for removing the oil filter on GM vehicles with 3 litre DTI engines

General Information

Diesel Injector Seat Cutter Set

• 15mm flat cutter with 19mm external diameter for other makes
• 17mm angles cutter with 21mm external diameter for Fiat, Iveco
• 17mm flat cutter with 17mm external diameter for BMW, PSA, Renault
• The 17mm Flat cutter with 17mm external diameter for BMW/Peugeot/Renault19mm Angled cutter with 21mm external diameter for Fiat/ Iveco
• Set of 4 cutters for re-cutting injector seats when reconditioning diesel engines or replacing the injectors 15mm Flat cutter for universal applications

General Information

Diesel Engine Timing Tool - Fiat 2.3 JTD Diesel Engine Timing Tool - Fiat 2.3 JTD.

• The 23 JTD twin camshaft Common Rail diesel engine is belt driven between crankshaft and inlet camshaft but utilises a chain to connect both camshafts
• The high pressure fuel pump does not require timing
• This kit includes the latest Crankshaft Timing Pin required on engines produced from 2006-2008
• This kit includes the latest crankshaft timing pin
• An engine timing locking tool set for fiat ducato 23 JTD with engine codes: F1AE0481C, F1AE0481D, F1AE0481N 2002 to 2008 and the Fiat 30JTD with engine code F1CE0481D

General Information

Deep Impact Socket 3/4"D 32mm

• Manufactured from Chrome Molybdenum
• Available in range 19mm - 46mm
• Deep Impact socket
• Part of a range of Deep Impact Sockets in 3/4in. drive

• Part of a range of Deep Impact Sockets in 1in. drive
• Deep Impact socket
• Available in range 22mm - 70mm
• Manufactured from Chrome Molybdenum

• Manufactured from Chrome Molybdenum
• Available in range 22mm - 70mm
• Deep Impact socket
• Part of a range of Deep Impact Sockets in 1in. drive

• Manufactured from Chrome Molybdenum
• Available in range 22mm - 70mm
• Deep Impact socket
• Part of a range of Deep Impact Sockets in 1in. drive

• Manufactured from Chrome Molybdenum
• Volkswagen Audi Group, BMW, Ford, Vauxhall/Opel, Volvo and Rover
• Suitable for Mercedes-Benz (C & E class 602,605,606)
• Specifically for removing and installing deep seated Lambda sensors

General Information

Aluminium Repair System Aluminium Repair System.

• Can be used with standard heat source
• Complete with tinning brush & 5 aluminium rods
• This product will repair any damage to aluminium parts quickly and effectively without using flux or chemicals
• Using a standard heat source these aluminium brazing rods can repair damage to most aluminium parts without using flux or chemicals Brazes all Aluminium Alloys, including Zinc, Magnesium, Pot Metal and Cast Aluminium

General Information

Special Socket 24mm - VAG Special Socket 24mm - VAG.

• Chrome Molybdenum
• Introduced primarily for removing the drive axles
• Special socket
• This Bi-Hex Socket has been introduced primarily for removing the drive axle screw on Volkswagen Touran ( 06-) and Passat

• Spring loaded trigger
• Nickel plated nozzle
• Use with air compressor
• Quick removal of dust and particles
• 100mm (4in.) lance

• Full instructions are included
• The tool works with an air compressor at 4-7 BAR and on a maximum diameter of 110mm
• This CV Bootgun is designed for stretching flexible CV Boots on to the drive shaft assemblies of automotive vehicles

• 4821A - Water Pump Pliers - 16in.
• 4820A - Water Pump Pliers - 10in.
• 4819 - Side Cutters - 6in.
• 4817 - Long Nose Pliers - 6in.
• A new range of chromed nickel steel pliers with serrated jaws - spring loaded and covered by TUV/GS certificates.

General Information

Washer Jet Tool (CD) Washer Jet Tool (CD).

• Other end gives a firmer tool for redirecting onto the windscreen
• One screw end reveals fine pin point for cleaning out
• Knurled body gives added grip, complete with a pocket clip
• Suitable for cleaning out blocked washer jets and redirecting
• Double ended washer jet tool

General Information

Manual Pressure Brake Bleeder 2L

• Designed to use with most brake master cylinder reservoirs measuring 1in. to 3in.
• Is supplied along with a European adaptor
• 2 litre container supplied with European adaptor
• Easy to use and designed for single handed operation
• Manual brake bleeder

• Designed to reduce the risk of damaging the motorcycle wheel rims when fitting or removing tyres
• Set of two
• Soft material will not damage the rims
• String line attachment for easy removal

General Information

Wire Brush 4 Row

• The brush conforms to PAHS standards
• 4 row brush
• Carbon steel wire and a soft grip handle

General Information

Brake Fluid Tester

• PLEASE NOTE - NOT SUITABLE FOR SILICONE BASED DOT 5 FLUID
• Suitable for DOT 3, DOT 4 & DOT 5.1
• Battery supplied
• Colour coded LEDs show level of water
• Quick and simple tool
• Essential safety check
• Identify percentage of water in brake fluid

General Information

Oil Filter Wrench - 64.5mm x 14 Flutes x 3/8"D

• 3/8in.D
• Removes filters without damage to the filter housing
• Oil Filter wrench size: 645mm x 14 flutes
• An aluminium Oil Filter Wrench specifically designed for use on Toyota (07-08) 35L V6 and Lexus GS300 (06-) IS250(2006-) IS350(2006-) ES350(2007-) GS350(2007-) GS450H(2007-) LS460(2007-) RX350(2007-) LS600H(2008-)

General Information

Tyre Pressure & Depth Gauge

• CE certificated and ROHS compliant.
• Integral tyre tread depth gauge.
• Ranges from 3 - 99 PSI with auto power off function.
• A tyre pressure gauge with PSI, BAR, KPA, KG-cm options.
• Two in one essential tools for the Motorist.

• Simply remove 1/2in.D adaptor to reveal 3/8in.D
• Legs manufactured from hardened Chrome Steel (Inside measurement 28mm)
• Can also be tightened using a 21mm socket or spanner
• Removes and tightens oil filters ranging from 635mm to 101mm and driven by 3/8in. or 1/2in. drive accessories

General Information

Timing Tool Kit - fits Renault 1.6/2.0/2.3 DCI/ Nissan Timing Tool Kit - fits Renault 1.6/2.0/2.3 DCI/ Nissan.

• OEM Codes: EN48334, EN48332, EN48331, EN48330 Made in Sheffield
• Supplied in metal storage case
• Two crankshaft locking pins are now included to cover for the 16 DCi (Comp G) and 20, 23 DCi (Comp F) Component G - Crankshaft Locking Pin has been added for later M9T 20 and R9M 16 DCi engines
• Timing tool kit for Renault 20DCI chain drive diesel engines fitted to the Megane/ Vel Satis/Espace/Scenic/Trafic/Laguna/Koleos also fitted to the Nissan Qashqai and the Vauxhall/Opel Vivaro Packed in a metal case for storage Application list and OEM

• Motorcycle fork oil level adjuster
• Syringed hollow filler
• Aluminium level adjuster
• A quick and accurate way of setting and adjusting fork oil levels
• Quick and accurate
• Time saver

General Information

Hose Clamp Tool (Bar Type) Hose Clamp Tool (Bar Type).

• Ensures complete clamp
• No sharp edges
• Steel construction with chrome plated
• Suitable for brake and fuel hoses

General Information

Side Lever Barrel Pump Side Lever Barrel Pump.

• Pumps most non-corrosive fluids
• Multi-use tool
• Barrel not included
• For pumping non corrosive liquids from 205 litre drums

General Information

Telescopic Stainless Steel Mirror 6.3 X 4.5cm Telescopic Stainless Steel Mirror 6.3 X 4.5cm.

• Angled for increased applications
• Soft Grip handle
• Extends from 228mm to 717mm
• Unbreakable mirror

• Measures 63mm x 45mm

• A refractometer can check these additives with just a small amount of fluid
• Includes refractometer - precision screwdriver and dropper
• For HGVs and Light Commercials
• This optical refractometer is designed for checking the concentration of Adblue - a urea additive in the exhaust flow which reduces NOx-emissions

• Impact quality
• Correctly hardened
• Manufactured from Chrome Molybdenum
• This M18 Spline Bit is essential for use on rear hubs on Volkswagen Golf/Jetta and other Mk IV chassis models

General Information

Hex Bit Set 7mm - 2pc. Hex Bit Set 7mm - 2pc

• 65mm and 92mm long
• Applications for: BMW3/5 with E36 chassis| Ford Mondeo, Fiesta, Alfa Romeo, Vauxhall, Volkswagen, SAAB, Chrysler, BMW Mini etc
• Essential brake service tool
• Two lengths of 7mm Hex Key in 3/8in. drive format for use on brake calipers on BMW 3 Series with E36 chassis

• Includes 1.6mm graduation for minimum tyre depth
• 1mm to 22mm
• Chrome plated finish
• 6 sizes calibrated
• Brass construction

General Information

Oil Filter Wrench 64.5mm x 14 Flutes x 1/2"D with 21mm Hex

• Features 6 slot design specific to Toyota filters
• 14 flutes x 645mm
• Including Prius, Corolla and Avensis
• An oil filter wrench specifically designed for use on Toyota models where 6 additional fins help drive the wrench

General Information

Timing Tool Kit - Fiat/Alfa Romeo/Saab/GM JTD. Timing Tool Kit - Fiat/Alfa Romeo/Saab/GM JTD

• 14 Buffing mops
• Supplied in metal case with EVA foam
• Essential tool
• Made in Sheffield
• Fits a wide range of models
• For use on Fiat | Alfa JTD multijet diesel engines 1.6 | 1.9 | 2.4 SOHC | DOHC

General Information

Engine Timing Tool Kit - BMW.;,,**,/ Engine Timing Tool Kit - BMW;,..*,*.

• Made in Sheffield
• Essential tool kit
• Pump Pulley Removal Tool included. Manufactured from selected steel
• Applications include BMW 2.0 N47 | N47S (2007-2010)