Proud to be a UK-based company
Contact us
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Weight | 1.099 kg |
| Additional Information | with nuts |
| Placement on Vehicle | Front Axle Right |
| Length | 333 mm |
| Paired article numbers | 49063 |
| Type | Tie Rod |
| Function | Tie Rod |
| Extra Description | ProKit |
| Additional Information 2 | with clamps, with steering bellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (39602)
- 1x Febi Clamping Clip (38761)
- 1x Febi Clamping Clip (38754)
- 1x Febi Tie Rod End (19342)
- 1x Febi Inner Tie Rod (32597)
£34.49
Important compatibility info
| Weight | 0.075 kg |
| Type | Repair Kit, clutch booster |
| Function | Repair Kit, clutch booster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 0.54 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 026 129 589 A S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 362 mm |
| Function | Suspension Spring |
| Weight | 1.754 kg |
| Wire Diameter | 10.8 mm |
| Type | Suspension Spring |
| Outer diameter | 111 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Inner diameter 1 | 28 mm |
| Inner diameter 2 | 57 mm |
| Weight | 0.351 kg |
| Joint Type | CV Joint |
| Type | Bellow Kit, drive shaft |
| Material | Thermoplastic polyester elastomer |
| Placement on Vehicle | Rear Axle, Wheel Side |
| Length | 62 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (180069)
- 1x Febi Molybdenum Grease (02582)
£34.49
Important compatibility info
| Weight | 0.354 kg |
| Type | Clutch Release Bearing |
| Function | Clutch Release Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Length | 1170 mm |
| Colour | Blue |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Sensor, wheel speed |
| Weight | 0.06 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.48
Important compatibility info
| Width of castor bearing surface | 30 mm |
| Weight | 0.210 kg |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Outer diameter | 60 mm |
| Material | Plastic |
| Mounting points diameter | 10 mm |
| Inner diameter | 10 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with cap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.47
Important compatibility info
| Additional Information | with axle nut |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Inner diameter | 48 mm |
| Outer diameter | 86.5 mm |
| Width | 42 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bearing Type | Angular Ball Bearing |
| Weight | 0.928 kg |
| Additional Information 2 | with integrated magnetic sensor ring, with retaining ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (174117)
- 1x Febi Circlip (174295)
£34.46
Important compatibility info
| Opening Temperature | 87 °C |
| Weight | 0.24 kg |
| Additional Information | with gasket/seal |
| Housing Type | with housing |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.46
Important compatibility info
| Length | 149 mm |
| Number of Connectors / Ports | 3 |
| Function | Sensor, camshaft position |
| Weight | 0.09 kg |
| Type | Sensor, camshaft position |
| Additional Information | with holder |
| Additional Information 2 | with cable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.46
Important compatibility info
| Colour | Red |
| Number of Connectors / Ports | 6 |
| Function | Resistor, interior blower |
| Extra Description | febi Plus |
| Type | Resistor, interior blower |
| Weight | 0.060 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Weight | 0.25 kg |
| Function | Gas Spring, boot/cargo area |
| Length | 365 mm. 231 mm |
| Housing Diameter | 18 mm |
| Eject Force | 450 N |
| Placement on Vehicle | both sides |
| Stroke | 107 mm |
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 16.5 mm |
| Housing length | 231.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Pump Type | Mono Pump |
| Function | Washer Fluid Pump, window cleaning |
| Weight | 0.1 kg |
| Type | Washer Fluid Pump, window cleaning |
| for OE number | 28920-AR000 |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Weight | 0.232 kg |
| Cross Section | 35 mm² |
| Type | Plug |
| Number of Connectors / Ports | 2 |
| Function | Plug |
| Port / Connector type | REMA Connector |
| Version | Aftermarket |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Function | Radiator Hose |
| Cooling Hose | from distributor to engine cooler |
| Type | Radiator Hose |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Additional Information 2 | with quick couplers |
| Weight | 0.52 kg |
| Placement on Vehicle | Upper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Function | Expansion Tank, coolant |
| Weight | 0.300 kg |
| Type | Expansion Tank, coolant |
| for OE number | 2 088 138 |
| Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Material | Plastic |
| Weight | 0.64 kg |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| for OE number | 8A0 121 403 |
| Additional Information | with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Weight | 0.081 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Cable Length | 1080 mm |
| Function | Sensor, wheel speed |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Placement on Vehicle | Front |
| Type | Wiper Motor |
| Weight | 1.05 kg |
| Rated Power | 30 W |
| Driver Position | for left-hand drive vehicles |
| Function | Wiper Motor |
£34.45
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023