Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.095 kg |
| Opening Temperature | 92 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information 2 | without seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.370 kg |
| Piston Diameter | 17 mm |
| Placement on Vehicle | Rear Axle Left |
| Material | Grey Cast Iron |
| Paired article numbers | 23734 |
| Function | Wheel Brake Cylinder |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 4 |
| Function | Stop Light Switch |
| Weight | 0.017 kg |
| Type | Stop Light Switch |
| Housing Colour | Blue |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.43 kg |
| Placement on Vehicle | Rear Axle, Wheel Side, transmission sided |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 100 mm |
| Inner diameter 1 | 21 mm |
| Material | Rubber |
| Length | 96 mm |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (03362)
- 1x Febi Clamping Clip (38758)
- 6x Febi Bolt, drive shaft flange (03004)
- 1x Febi Spring Washer (07253)
- 1x Febi Circlip (03335)
- 1x Febi Molybdenum Grease (02582)
£14.06
Important compatibility info
| Number of Ribs | 7 |
| Function | V-Ribbed Belt |
| Weight | 0.131 kg |
| Length | 1105 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.370 kg |
| Piston Diameter | 22 mm |
| Placement on Vehicle | Rear Axle Right |
| Material | Grey Cast Iron |
| Paired article numbers | 23733 |
| Function | Wheel Brake Cylinder |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Material | Plastic, PA (polyamide) |
| Function | Guide, timing chain |
| Friction Lining Material | Plastic |
| Placement on Vehicle | Left |
| Weight | 0.118 kg |
| Type | Guide, timing chain |
| Hole Spacing | 214 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Weight | 0.199 kg |
| Length | 70 mm |
| Width | 54 mm |
| Outer diameter | 41 mm |
| Thickness | 54 mm |
| Inner diameter | 16.5 mm |
| Function | Bushing, leaf spring |
| Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.194 kg |
| Material | Rubber/Metal |
| Function | Flange, carburettor |
| Type | Flange, carburettor |
| Replaces | 12129 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.11 kg |
| Width | 19 mm |
| Number of Teeth | 133 |
| Belts | with rounded tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.348 kg |
| Height | 160 mm |
| Width | 102 mm |
| Port / Connector type | DIN Connector |
| Fastening Type | 2-point attachment |
| DIN / ISO | 72591 |
| Number of circuits | 2 |
| Type | Holder, rotating beacon |
| Function | Holder, rotating beacon |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| External Thread Size | M10 x 1,25 |
| Function | Tie Rod End |
| Length | 110 mm |
| Thickness | 68 mm |
| Spanner Size | 17 |
| Paired article numbers | 42721 |
| Placement on Vehicle | Front Axle Left |
| Weight | 0.4 kg |
| Extra Description | ProKit |
| Internal Thread Size | M14 x 1,5 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Valve stem diameter | 6.9 mm |
| Valve head diameter | 33.5 mm |
| Function | Intake Valve |
| Length | 113.3 mm |
| Weight | 0.075 kg |
| Type | Intake Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Outer diameter | 120 mm |
| Inner diameter | 15 mm |
| Weight | 0.780 kg |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Height | 49 mm |
| Additional Information 2 | without ball bearing |
| for OE number | 03 44 543 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Length | 96 mm |
| Function | Linkage, door release |
| Weight | 0.08 kg |
| Type | Linkage, door release |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Shape/Form | rectangular |
| Weight | 0.112 kg |
| Height | 62 mm |
| Length | 90 mm |
| Width | 64 mm |
| Material | Plastic |
| Colour | Black |
| Type | Lift Point Pad, jack |
| Function | Lift Point Pad, jack |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.18 kg |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with fastening material, without ball bearing |
| Function | Repair Kit, suspension strut support mount |
| Extra Description | ProKit |
| Type | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (34391)
- 1x Febi Nut (24375)
- 1x Febi Washer (01965)
£14.06
Important compatibility info
| Weight | 0.600 kg |
| Additional Information | with nuts |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 195 mm |
| Material | Metal |
| Rod/Strut | Coupling Rod |
| Surface | Zinc-coated |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Wet Boiling Point | 250 °C |
| Weight | 0.165 kg |
| Length | 1215 mm |
| Extra Description | febi Plus |
| Function | Oil Dipstick, automatic transmission |
| Length from grip collar to min. marking | 1144 mm. 1095 mm |
| Length from grip collar to max. marking | 1133 mm. 1089 mm |
| Colour | Red |
| Type | Oil Dipstick, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
| Weight | 0.086 kg |
| Material | PU (Polyurethane) |
| Length | 134 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.04 kg |
| Placement on Vehicle | Rear |
| Material | FPM (fluoride rubber) |
| Outer diameter | 75 mm |
| Thickness | 10 mm |
| Inner diameter | 43 mm |
| Function | Shaft Seal, differential |
| Type | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Material | Aluminium |
| Additional Information 2 | without ball bearing |
| Inner diameter | 11 mm |
| Placement on Vehicle | Rear Axle |
| Replaces | 22986 |
| Weight | 0.28 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Hole Spacing | 102 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.14 kg |
| Placement on Vehicle | both sides |
| Length | 255 mm |
| Housing Diameter | 15 mm |
| Eject Force | 420 N |
| Stroke | 104 mm |
| Mounting points diameter | 8.3 mm |
| Piston conrod diameter | 6 mm |
| Type | Gas Spring, bonnet |
| Function | Gas Spring, bonnet |
| Housing length | 143.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Piston Diameter | 22.2 mm |
| Weight | 0.392 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Grey Cast Iron |
| Function | Wheel Brake Cylinder |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.02 kg |
| Length | 95 mm |
| Material | Plastic |
| Outer diameter | 30 mm |
| Colour | Black |
| Number of Connectors / Ports | 2 |
| Function | Sensor, coolant level |
| Type | Sensor, coolant level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.2 kg |
| Material | Plastic |
| Colour | Black |
| Combi Switch Function | with wipe-wash function, with rear wipe-wash function, with wipe interval function |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.48 kg |
| Placement on Vehicle | Front Axle Right |
| Length | 136 mm |
| Paired article numbers | 26152 |
| Function | Tie Rod End |
| Additional Information | with counter nut |
| Extra Description | ProKit |
| Type | Tie Rod End |
| External Thread Size | M12 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.19 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Rear |
| Length | 77 mm |
| Material | Rubber/Metal |
| Outer diameter | 46 mm |
| Inner diameter | 15 mm |
| Function | Bushing, leaf spring |
| Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Length | 145 mm |
| Inner diameter 1 | 29 mm |
| Inner diameter 2 | 98 mm |
| Placement on Vehicle | Front Axle, Wheel Side |
| Weight | 0.25 kg |
| Function | Bellow Kit, drive shaft |
| Material | Thermoplast |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (45645)
- 2x Febi Molybdenum Grease (02582)
£14.06
Important compatibility info
| Weight | 0.335 kg |
| Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
| Width | 105 mm |
| Material | Rubber/Metal |
| Outer diameter | 55 mm. 26 mm |
| Thickness | 45 mm |
| Inner diameter | 20 mm. 11 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.48 kg |
| Placement on Vehicle | Front Axle Left |
| Length | 136 mm |
| Paired article numbers | 26153 |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M14 x 1,5 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.015 kg |
| for OE number | 129 545 02 24 |
| Function | Sensor, coolant level |
| Number of Connectors / Ports | 2 |
| Housing Colour | Black/White |
| Type | Sensor, coolant level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.035 kg |
| Number of Connectors / Ports | 2 |
| Switch Point | 95 °C. 90 °C |
| Colour Coding | Blue |
| Function | Temperature Switch, radiator fan |
| Type | Temperature Switch, radiator fan |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.264 kg |
| Additional Information 2 | with oil sump gasket |
| Height | 46 mm |
| Length | 244 mm |
| Width | 152 mm |
| Function | Hydraulic Filter Kit, automatic transmission |
| Type | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Inner diameter | 27 mm |
| Function | Mounting, stabiliser bar |
| Material | Rubber |
| Placement on Vehicle | Front Axle |
| Type | Mounting, stabiliser bar |
| Weight | 0.08 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.394 kg |
| Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
| Length | 90 mm |
| Width | 47 mm |
| Material | Rubber/Metal |
| Thickness | 44 mm |
| Inner diameter | 17 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Function | Gasket, cylinder head cover |
| Thickness | 9 mm |
| Material | NBR (nitrile butadiene rubber) |
| Width | 313 mm |
| Length | 505 mm |
| Weight | 0.052 kg |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Function | Mount, exhaust system |
| Placement on Vehicle | Catalytic Converter, Soot Particulate Filter |
| Material | Rubber/Metal |
| Type | Mount, exhaust system |
| Weight | 0.287 kg |
| for OE number | 1J0 253 144 H |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.080 kg |
| Material | Rubber |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Material | Rubber/Metal |
| Weight | 0.312 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Rolling Bearing, suspension strut support mount (10091)
- 1x Febi Suspension Strut Support Mount (47358)
£14.06
Important compatibility info
| Weight | 0.215 kg |
| Placement on Vehicle | Front Axle, transmission sided |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 108 mm |
| Inner diameter 1 | 24 mm |
| Material | Rubber |
| Length | 129 mm |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (14069)
- 1x Febi Clamping Clip (38758)
- 1x Febi Molybdenum Grease (02582)
£14.06
Important compatibility info
| Weight | 0.11 kg |
| Opening Temperature | 80 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
| for OE number | 11 53 1 710 953 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Seal, thermostat (11443)
£14.06
Important compatibility info
| Weight | 0.310 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Grey Cast Iron |
| Function | Wheel Brake Cylinder |
| Piston Diameter | 20.6 mm |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.259 kg |
| Function | Hydraulic Filter, automatic transmission |
| Height | 73 mm |
| Type | Hydraulic Filter, automatic transmission |
| Width | 126 mm |
| Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Spanner Size | 80 |
| Function | Nut, kingpin |
| Thickness | 21.6 mm |
| Type | Nut, kingpin |
| Weight | 0.277 kg |
| Internal Thread Size | M60 x 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.09 kg |
| Width | 17 mm |
| Number of Teeth | 104 |
| Belts | with rounded tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.055 kg |
| Placement on Vehicle | Rear Axle |
| Length | 1243 mm |
| Colour | Black, Grey |
| Number of Connectors / Ports | 2 |
| Brake Type | Disc Brake |
| Function | Warning Contact, brake pad wear |
| Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.04 kg |
| Placement on Vehicle | Right |
| Length | 362 mm |
| Width | 165 mm |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Placement on Vehicle | Left Rear |
| Length | 760 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Weight | 0.214 kg |
| Paired article numbers | 34912 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Function | Charge Air Hose |
| Inner diameter 2 | 43 mm |
| Inner diameter 1 | 45 mm |
| Weight | 0.200 kg |
| Turbocharger line | Piping to charge air cooler |
| Placement on Vehicle | Left |
| Type | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023