Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Left |
Material | Cast Aluminium |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 178457 |
Weight | 2.1 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 5 |
for OE number | 93179927 |
Type | Mass Air Flow Sensor |
Resistor Type | Hot-wire Sensor |
Function | Mass Air Flow Sensor |
Weight | 0.178 kg |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.290 kg |
Placement on Vehicle | Front Axle Right, Rear Axle Right |
Length | 200 mm |
Paired article numbers | 26531 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Outer diameter | 8 mm |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,5, M12 x 1,5 |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.275 kg |
Function | Tensioner, timing chain |
Type | Tensioner, timing chain |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.730 kg |
Material | Cast Aluminium |
Number of Teeth | 19 |
Number of Wings | 20 |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | NBR (nitrile butadiene rubber) |
Thickness | 3 mm |
Inner diameter | 80 mm |
Function | Seal Ring, water pump |
Weight | 0.002 kg |
Type | Seal Ring, water pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Upper Left, Upper Right |
Weight | 0.18 kg |
Extra Description | febi Plus |
Function | Bonnet Lock |
Colour | black |
Type | Bonnet Lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with nut |
Placement on Vehicle | Front Axle Left |
Function | Drive Shaft |
Thread Size | M22x1,5 |
External Teeth, Wheel Side | 33 |
Weight | 6.628 kg |
Min. Length | 576 mm |
Wheel Sided Joint Diameter | 91 mm |
Transmission-side joint diameter | 94.0 mm |
Type | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.552 kg |
Outer diameter | 128 mm |
Inner diameter | 41 mm |
Bolt Hole Circle Diameter | 90 mm |
Number of Holes | 6 |
Thickness | 20 mm |
Function | Joint, propshaft |
Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.0 kg |
Charge Type | Exhaust Turbocharger |
Type | Charger, charging (supercharged/turbocharged) |
Additionally required parts | Mounting Kit, motor-specific oil supply lines (feed/return) |
Function | Charger, charging (supercharged/turbocharged) |
Extra Description | BorgWarner Turbo NEW |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023