Important compatibility info
| Hub Profile | 22.2 x 20.4 |
| Outer diameter | 230 mm |
| Function | Clutch Kit |
| Engine Version | for engines with dual-mass flywheel |
| Number of Teeth | 28 |
| Number of Parts | 3 -part |
| Type | Clutch Kit |
Important compatibility info
| Number of Parts | 3 -part |
| Number of Teeth | 28 |
| Hub Profile | 22.2 x 20.3 |
| Outer diameter | 230 mm |
| Engine Version | for engines with dual-mass flywheel |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Replaces | HK2030 |
Important compatibility info
| Outer diameter | 228 mm |
| Type | Clutch Kit |
| Function | Clutch Kit |
| Hub Profile | 22.1 x 20.3 |
| Replaced by | HK2765 |
Important compatibility info
| Material | Aluminium |
| Function | Oil sump |
| Type | Oil sump |
Important compatibility info
| Number of belts | 1 |
| Driven Units | Camshaft |
| Number of Teeth | 120 |
| Width | 30 mm |
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
Important compatibility info
| Function | Auxiliary water pump (cooling water circuit) |
| Connector Shape | Oval |
| Type | Auxiliary water pump (cooling water circuit) |
| Voltage | 12 V |
| Port / Connector type | 2 PIN |
Important compatibility info
| Function | Oil sump |
| Material | Aluminium |
| Type | Oil sump |
| Additional Information 2 | with bore for oil-level sensor |
Important compatibility info
| Length 1 | 1168 mm |
| Length 2 | 872 mm |
| Number of Gears | for reverse gear |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Important compatibility info
| Internal Teeth, wheel side | 30 |
| Function | Joint Kit, drive shaft |
| External Teeth, Wheel Side | 36 |
| Type | Joint Kit, drive shaft |
| Seal Diameter | 59.5 mm |
| Length | 94 mm |
| Thread Size | M16X1,5 |
| Placement on Vehicle | Front Axle Left, Wheel Side |
| Additional Information 2 | with groove |
Important compatibility info
| Seal Diameter | 59.5 mm |
| Function | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 30 |
| Type | Joint Kit, drive shaft |
| External Teeth, Wheel Side | 36 |
| Additional Information 2 | with groove |
| Length | 96 mm |
| Thread Size | M16X1.5 |
Important compatibility info
| Thread Size | M16X1.5 |
| Additional Information 2 | with groove |
| Seal Diameter | 59.5 mm |
| Internal Teeth, wheel side | 27 |
| Type | Joint Kit, drive shaft |
| External Teeth, Wheel Side | 36 |
| Length | 106 mm |
| Function | Joint Kit, drive shaft |
Important compatibility info
| Length | 78 mm |
| Function | Joint Kit, drive shaft |
| Int. teeth, diff.side, conn.to transm. | 34 |
| Type | Joint Kit, drive shaft |
Important compatibility info
| Diameter 2 | 100 mm |
| Placement on Vehicle | Front Axle Right |
| Function | Drive Shaft |
| Length | 814 mm |
| External Teeth, Wheel Side | 36 |
| Type | Drive Shaft |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1390)
Important compatibility info
| Diameter 2 | 119 mm |
| Length | 480 mm |
| External Teeth, Wheel Side | 36 |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
| Type | Drive Shaft |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1468)
Important compatibility info
| External Teeth, Wheel Side | 36 |
| Function | Drive Shaft |
| Length | 755 mm |
| Type | Drive Shaft |
| Diameter 2 | 119 mm |
| Placement on Vehicle | Front Axle Right |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1468)
Important compatibility info
| External Teeth, Wheel Side | 36 |
| Placement on Vehicle | Front Axle Left |
| Function | Drive Shaft |
| Diameter 2 | 119 mm |
| Length | 475 mm |
| Type | Drive Shaft |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1391)
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1468)
Important compatibility info
| Material | AEM (Ethylene Acrylate Rubber) |
| Colour | Black |
| Inner diameter 1 | 53 mm |
| Inner diameter 2 | 50 mm |
| Port / Connector type | OE PUSH CONNECTOR |
| Function | Charge Air Hose |
| Placement on Vehicle | Left, Lower, Front |
| Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1107S)
Important compatibility info
| Extra Description | Trilobe |
| Function | Bellow Kit, drive shaft |
| Length | 85 mm |
| Inner diameter 2 | 69 mm |
| Inner diameter 1 | 23 mm |
| Type | Bellow Kit, drive shaft |
| Additional Information 2 | with clamps |
| Lubrication | with grease lubrication |
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Additional Information 2 | with clamps |
| Lubrication | with grease lubrication |
| Length | 115 mm |
| Inner diameter 2 | 100 mm |
| Inner diameter 1 | 27 mm |
| Material | Thermoplast |
| Type | Bellow Kit, drive shaft |
| Replaces | BCB6137 |
Important compatibility info
| Inner diameter | 10 mm |
| Distance of fastening bolts | 125 mm |
| Height | 62 mm |
| Additional Information 2 | without bearing |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Paired article numbers | FSM5282 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















