Important compatibility info
Weight | 0.390 kg |
Placement on Vehicle | Front Axle Left |
Length | 340 mm |
Paired article numbers | 38072 |
Rod/Strut | Coupling Rod |
External Thread Size | M10 x 1,5 |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 30195 |
Weight | 2.230 kg |
Placement on Vehicle | Front Axle Left, Lower, Front |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing, with ball joint |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with lock nut |
External Thread Size | M14 x 1,5 |
Cone Size 2 | 22 mm |
Cone Size | 19.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 198 mm |
Outer diameter | 88 mm |
Filter type | with water drain screw, In-Line Filter |
Function | Fuel filter |
Additional Information | with gaskets/seals |
Weight | 0.42 kg |
Type | Fuel filter |
Housing material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Aluminium |
Number of Wings | 7 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Paper |
Weight | 1.005 kg |
Type | Water Pump, engine cooling |
Additional Information | with gasket/seal |
Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Water Pump, engine cooling (22388)
- 7x Febi Screw, waterpump (22387)
Important compatibility info
Weight | 8.360 kg |
Rotor Style | Internally Vented |
Rim Hole Number | 5 -Hole |
Placement on Vehicle | Front Axle |
Outer diameter | 305 mm |
Thickness | 44 mm |
Brake Disc Thickness | 28 mm |
Minimum thickness | 26 mm |
Bolt Hole Circle Diameter | 108 mm |
Centering Diameter | 61 mm |
Surface | Coated |
Number of mounting bores | 2 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.22 kg |
Length | 268 mm |
Function | Air Filter |
Type | Air Filter |
Height | 32 mm |
Width | 168 mm |
Filter type | Filter Insert |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 24 mm |
for OE number | 04E 145 299 L |
Weight | 0.442 kg |
Outer diameter | 65 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.159 kg |
External Thread Size | M10 x 1,5 |
Outer diameter | 50 mm |
Function | Stop- /Mounting Buffer |
Thickness | 44 mm |
Thread Length | 12 mm |
Internal Thread Size | M10 x 1,5 |
Type | Stop- /Mounting Buffer |
Buffer Design | C |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 252 mm |
Additional Information | with gasket/seal |
Function | Fuel filter |
Outer diameter | 55 mm |
Type | Fuel filter |
Filter type | In-Line Filter |
Weight | 0.31 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 30 mm |
Number of Teeth | 281 |
Belts | with rounded tooth profile |
Function | Timing Belt |
Weight | 0.315 kg |
Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.224 kg |
Length | 225 mm |
Height | 29 mm |
Width | 112 mm |
Filter type | Activated Carbon Filter |
Type | Filter Set, cabin air |
Function | Filter Set, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 200 mm |
Material | Thermoplastic polyester elastomer |
Type | Protective Cap/Bellow, shock absorber |
Function | Protective Cap/Bellow, shock absorber |
Weight | 0.034 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.24 kg |
Placement on Vehicle | Lower, Left |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Belts | with rounded tooth profile |
Water pump impeller material | Plastic |
Width | 24 mm |
Type | Water Pump & Timing Belt Kit |
Function | Water Pump & Timing Belt Kit |
Surface | PTFE (Polytetrafluorethylene) coated |
Weight | 1.660 kg |
Number of Teeth | 146 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (27825)
- 1x Febi Water Pump, engine cooling (28531)
Important compatibility info
Outer diameter | 63 mm |
Paired article numbers | 186198 |
Weight | 0.130 kg |
Type | Bushing, axle beam |
Function | Bushing, axle beam |
Inner diameter | 14.5 mm |
Thickness | 52 mm |
Material | Rubber/Metal |
Placement on Vehicle | Rear Axle Right, Front, Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 51713873 |
Operating Mode | Electric |
Number of Connectors / Ports | 2 |
Function | Stop Light Switch |
Housing Colour | white |
Weight | 0.02 kg |
Type | Stop Light Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.088 kg |
Height | 80 mm |
Outer diameter | 74.4 mm |
Spanner Size | 27 |
Bolt Head/Nut Design | Male Hex |
Tightening Torque | 25 Nm |
Type | Cap, oil filter housing |
Function | Cap, oil filter housing |
Extra Description | febi Plus |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.02 kg |
Length | 40 mm |
Number of Connectors / Ports | 3 |
Function | Sensor, crankshaft pulse |
Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.135 kg |
Function | Tightening Strap, wing |
Width 1 | 79 mm |
Thickness | 10 mm |
Type | Tightening Strap, wing |
Width 2 | 86 mm |
Length | 240 mm |
Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 9.5 kg |
External Thread Size | M12 x 1,5, M20 x 1,5 |
Outer diameter | 228 mm. 258 mm |
Thickness | 180 mm. 525 mm |
Type | Bellow, air suspension |
Function | Bellow, air suspension |
Additional Information | with piston |
Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023