Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 1.63 kg |
| Outer diameter | 314 mm |
| Voltage | 12 V |
| Function | Fan, engine cooling |
| Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£59.19
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | 12045 |
| Placement on Vehicle | Lower Front Axle, Left |
| Weight | 4.000 kg |
| Material | Cast Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with holders |
| Additional Information 2 | with ball joint |
| Internal Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£59.19
Important compatibility info
| Paired article numbers | 26996 |
| Placement on Vehicle | Right Rear |
| Operating Mode | Electric |
| Function | Window Regulator |
| Weight | 0.918 kg |
| Type | Window Regulator |
| Additional Information | without electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£59.19
Important compatibility info
| Weight | 0.218 kg |
| Function | Auxiliary water pump (cooling water circuit) |
| Type | Auxiliary water pump (cooling water circuit) |
| Number of Connectors / Ports | 3 |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£59.19
Important compatibility info
| for OE number | 16620-0Y020 |
| Material | Plastic |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Weight | 0.512 kg |
| Type | Belt Tensioner, V-ribbed belt |
| Function | Belt Tensioner, V-ribbed belt |
| Width of castor bearing surface | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£59.19
Important compatibility info
| Weight | 0.05 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 1035 mm |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£59.19
Important compatibility info
| Function | Joint Kit, drive shaft |
| Int. teeth, diff.side, conn.to transm. | 24 |
| Type | Joint Kit, drive shaft |
| External Teeth, Diff.Side | 25 |
| Weight | 3.039 kg |
| Placement on Vehicle | transmission sided, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£59.19
Important compatibility info
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Weight | 0.470 kg |
| Outer length 1 | 1007 mm |
| Inner length 1 | 720 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£59.19
Important compatibility info
| Type | Ball Joint |
| Weight | 2.01 kg |
| Additional Information 2 | with crown nut |
| Function | Ball Joint |
| External Thread Size | M20 x 1,5 |
| Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£59.19
Important compatibility info
| Weight | 0.303 kg |
| Placement on Vehicle | Right |
| Hose Length | 470 mm |
| Type | Hose, crankcase ventilation |
| Inner diameter 2 | 14 mm |
| Inner diameter 1 | 12 mm |
| Height | 80 mm |
| Width | 180 mm |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£59.19
Important compatibility info
| Weight | 3.716 kg |
| Length | 130 mm |
| Width | 130 mm |
| Thickness | 91 mm |
| Function | Cylinder Liner, air compressor |
| Type | Cylinder Liner, air compressor |
| Additional Information | with piston, with piston pin, with retaining rings, with piston rings |
| Hole Spacing | 92 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£59.19
Important compatibility info
| Number of Connectors / Ports | 6 |
| Function | Steering Angle Sensor |
| Weight | 0.091 kg |
| Type | Steering Angle Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£59.19
Important compatibility info
| Weight | 2.950 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Steering arm type | Control Arm |
| Paired article numbers | 23153 |
| Material | Sheet Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (23150)
- 1x Febi Mounting, control/trailing arm (08014)
- 1x Febi Mounting, control/trailing arm (08945)
- 1x Febi Nut (15428)
£59.19
Important compatibility info
| Weight | 3.260 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 55 mm |
| Outer diameter | 78 mm |
| Bearing Type | Angular Ball Bearing |
| Inner diameter | 30 mm |
| Function | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£59.22
Important compatibility info
| Additional Information 2 | with fastening material |
| Function | Brake Pad Set, disc brake |
| Weight | 10.04 kg |
| Thickness/Strength 1 | 30 mm |
| Type | Brake Pad Set, disc brake |
| Inspection Tag | ECE R90 Approved |
| Wear Warning Contact | prepared for wear warning indicator |
| Width | 107.7 mm |
| Length | 247.5 mm |
| Placement on Vehicle | Rear Axle, Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£59.22
Important compatibility info
| Placement on Vehicle | Right |
| Length | 156 mm |
| Width | 160 mm |
| Thickness | 124.2 mm |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Weight | 1.98 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£59.23
Important compatibility info
| Placement on Vehicle | after catalytic converter |
| Spanner Size | 22 |
| Weight | 0.118 kg |
| Cable Length | 1105 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£59.24
Important compatibility info
| Weight | 0.060 kg |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | before soot particulate filter |
| Number of Connectors / Ports | 2 |
| Cable Length | 714 mm |
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£59.27
Important compatibility info
| Placement on Vehicle | Right |
| for OE number | 11 21 065 75R |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Weight | 1.166 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£59.29
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.108 kg |
| Cable Length | 508 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated, Regulating Sensor |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£59.30
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023