Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.111 kg |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 172048 |
| Number of Connectors / Ports | 2 |
| Resistance | 1800 Ohm |
| Cable Length | 1320 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.55
Important compatibility info
| Outer diameter | 94 mm |
| Inner diameter | 70 mm |
| Width | 50 mm |
| Function | Suspension, propshaft |
| Weight | 3.237 kg |
| Type | Suspension, propshaft |
| Length | 193 mm |
| Additional Information 2 | with ball bearing |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.05
Important compatibility info
| Weight | 0.020 kg |
| Placement on Vehicle | Front Axle, Rear Axle |
| Outer diameter | 68 mm |
| Thickness | 19 mm |
| Inner diameter | 36 mm |
| Function | Seal, brake caliper piston |
| Type | Seal, brake caliper piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.36
Important compatibility info
| for OE number | 51999641 |
| Weight | 0.250 kg |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Left |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.51
Important compatibility info
| Weight | 6.422 kg |
| External Teeth, Wheel Side | 36 |
| Bore Diameter | 10.5 mm |
| Bolt Hole Circle Diameter | 94 mm |
| Thread Size | M20x1,5 |
| Additional Information 2 | with nut |
| Wheel Sided Joint Diameter | 97 mm |
| Number of mounting bores | 6 |
| Min. Length | 517 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 108 mm |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Operating Mode | Hydraulic |
| Function | Tensioner, timing chain |
| Length | 60 mm |
| Weight | 0.210 kg |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.41
Important compatibility info
| Type | Brake Caliper |
| Paired article numbers | 185638 |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Weight | 1.25 kg |
| Brake caliper piston diameter | 34 mm |
| Function | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.49
Important compatibility info
| Function | Air Filter |
| Type | Air Filter |
| Filter type | Filter Insert |
| Weight | 4.62 kg |
| Inner diameter | 217 mm |
| Outer diameter | 327 mm |
| Length | 515 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.17
Important compatibility info
| Length | 526 mm |
| Weight | 1.7 kg |
| Width | 420 mm |
| Material | Sheet Steel |
| Type | Housing Cover, crankcase |
| Function | Housing Cover, crankcase |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.55
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.055 kg |
| Cable Length | 815 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.15
Important compatibility info
| Placement on Vehicle | Front Axle |
| Minimum thickness | 30 mm |
| Outer diameter | 350 mm |
| Thickness | 48.2 mm |
| Brake Disc Thickness | 32 mm |
| Rotor Style | Internally Vented |
| Weight | 12.72 kg |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.5 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.98
Important compatibility info
| Placement on Vehicle | Intake Side |
| Weight | 1.535 kg |
| Type | Camshaft |
| Function | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£130.42
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 2.09 kg |
| Length | 2650 mm |
| Outer diameter | 8.5 mm |
| Inner diameter | 4 mm |
| Pressure | 400 bar |
| Function | Hose Line, driver cab tilting device |
| Type | Hose Line, driver cab tilting device |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Inner diameter | 36 mm |
| Width | 170 mm |
| Parameter | 6PK |
| Type | Belt Pulley, crankshaft |
| Weight | 2.459 kg |
| Function | Belt Pulley, crankshaft |
| Outer diameter | 170 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£128.27
Important compatibility info
| Weight | 0.048 kg |
| Spanner Size | 29 |
| Number of Connectors / Ports | 3 |
| Connector Shape | Rectangular |
| Colour Coding | Black |
| Temperature range from | 95 °C. 102 °C |
| Temperature range to | 84 °C. 92 °C |
| Function | Temperature Switch, radiator fan |
| External Thread Size | M22 x 1,5 |
| Type | Temperature Switch, radiator fan |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.29
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178167 |
| Weight | 2.345 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.63
Important compatibility info
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Type | Brake Caliper |
| Paired article numbers | 181170 |
| Weight | 1.712 kg |
| Brake caliper piston diameter | 35 mm |
| Function | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.39
Important compatibility info
| Additional Information 2 | with clamps |
| Weight | 0.24 kg |
| Placement on Vehicle | Rear Axle, transmission sided |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 63 mm |
| Inner diameter 1 | 25 mm |
| Material | Rubber |
| Type | Bellow Kit, drive shaft |
| Length | 99 mm |
| for OE number | 126 350 03 37 OF |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (08405)
- 1x Febi Fastening Clamp (08406)
- 1x Febi Hose Connector (08407)
- 1x Febi Fastening Clamp (08408)
£9.76
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Weight | 1.366 kg |
| Chain Type | Duplex, with chain lock |
| Number of Chain Links | 186 |
| Timing Chain Size | D67ZN |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.01
Important compatibility info
| Additional Information 2 | with exhaust manifold |
| Weight | 7.0 kg |
| Recommended additional repairs | Repair kit |
| Charge Type | Exhaust Turbocharger |
| Type | Charger, charging (supercharged/turbocharged) |
| Additionally required parts | Mounting Kit |
| Function | Charger, charging (supercharged/turbocharged) |
| Extra Description | BorgWarner Turbo NEW |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£599.37
Important compatibility info
| Weight | 0.094 kg |
| Placement on Vehicle | frontal sided |
| Length | 65 mm |
| Bolt Head/Nut Design | Male Hex |
| Function | Pulley Bolt |
| External Thread Size | M18 x 1,5 |
| Type | Pulley Bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.18
Important compatibility info
| Weight | 0.1 kg |
| Material | Rubber |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.12
Important compatibility info
| Function | Wheel Bearing Kit |
| Bearing Type | Tapered Roller Bearing |
| Weight | 0.274 kg |
| Outer diameter 1 | 40 mm |
| Inner diameter 1 | 17.5 mm |
| Inner diameter 2 | 29 mm |
| Outer diameter 2 | 50 mm |
| Width 1 | 14 mm |
| Width 2 | 14 mm |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (08392)
- 1x Febi Shaft Seal, wheel bearing (03117)
- 1x Febi Nut, kingpin (02817)
- 1x Febi Washer (03119)
- 1x Febi Split Pin (02877)
£11.31
Important compatibility info
| Weight | 0.008 kg |
| Placement on Vehicle | Rear Axle, Front Axle |
| Width | 4.2 mm. 8.5 mm |
| Material | NBR (nitrile butadiene rubber) |
| Outer diameter | 80 mm |
| Inner diameter | 69 mm |
| Type | Shaft Seal, wheel bearing |
| Function | Shaft Seal, wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.46
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 102 mm |
| Width | 58 mm |
| Material | PU (Polyurethane) |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
| Weight | 0.100 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.13
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Resistance | 1185 Ohm |
| Cable Length | 1390 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Weight | 0.094 kg |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.63
Important compatibility info
| Type | Mounting, engine |
| for OE number | 21930-1H050 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Rear |
| Weight | 2.130 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.76
Important compatibility info
| Width | 54.5 mm |
| Length | 120.2 mm |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with fastening material |
| Inspection Tag | ECE R90 Approved |
| Weight | 1.406 kg |
| Thickness/Strength 1 | 18 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.63
Important compatibility info
| Gasket inner diameter | 37 mm. 48.9 mm |
| Gasket outer diameter | 43 mm. 54.14 mm |
| Function | Hydraulic Filter, automatic transmission |
| Type | Hydraulic Filter, automatic transmission |
| Weight | 0.035 kg |
| Filter type | Filter Insert |
| Outer diameter | 44 mm |
| Height | 52 mm |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.55
Important compatibility info
| Weight | 0.01 kg |
| Number of Connectors / Ports | 4 |
| Function | Sensor, intake manifold pressure |
| Type | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.58
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023