Important compatibility info
| Function | Wiper Blade |
| Length | 26 Inch |
| Quantity | 10 |
| Wiper blade type | Flat wiper blade |
| Length | 650 mm |
| Number of adapters | 9 |
| Type | Wiper Blade |
Important compatibility info
| Function | Wiper Blade |
| Length | 28 Inch |
| Quantity | 10 |
| Length | 700 mm |
| Wiper blade type | Flat wiper blade |
| Type | Wiper Blade |
| Number of adapters | 9 |
Important compatibility info
| Inner diameter 1 | 25 mm |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle |
| Type | Wheel Bearing Kit |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with integrated ABS sensor |
| Inner diameter 1 | 42 mm |
| Outer diameter 1 | 82 mm |
| Width 1 | 36 mm |
| Tightening Torque | 325 Nm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Bearing Code | Gen 1 |
Important compatibility info
| Type | Wheel Bearing Kit |
| Inner diameter 1 | 25 mm |
| Outer diameter 1 | 60 mm |
| Width 1 | 45 mm |
| Tightening Torque | 210 Nm |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle |
| Bearing Code | Gen 1 |
Important compatibility info
| Number of Wings | 6 |
| Water Pump Pulley Diameter | 59 mm |
| Housing Type | with housing |
| Additional Information | with gaskets/seals |
| Number of Teeth | 20 |
| Impeller Diameter | 61 mm |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Type | Water Pump, engine cooling |
Important compatibility info
| Function | Guide Sleeve, clutch |
| Type | Guide Sleeve, clutch |
Important compatibility info
| Type | Joint Kit, drive shaft |
| Seal Diameter | 58.5 mm |
| Length | 134 mm |
| External Teeth, Wheel Side | 25 |
| Internal Teeth, wheel side | 34 |
| Additional Information 2 | with groove |
| Function | Joint Kit, drive shaft |
| Thread Size | M24X1.5 |
Important compatibility info
| Length | 925 mm |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 24 |
| External Teeth, Wheel Side | 25 |
| Replaces | BDS1040 |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Thread Size | M12 x 1.5 |
| Colour | Green |
| Number of Connectors / Ports | 2 |
| Function | Sensor, coolant temperature |
| Type | Sensor, coolant temperature |
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Lubrication | with grease lubrication |
| Additional Information 2 | with clamps |
| Length | 100 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right, transmission sided |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 34 mm |
| Inner diameter 2 | 76 mm |
Important compatibility info
| Pressure | 1.4 bar |
| Material | Plastic |
| Pressure to | 20 psi |
| Function | Cap, coolant tank |
| Type | Cap, coolant tank |
Important compatibility info
| Function | Joint Kit, drive shaft |
| Length | 135 mm |
| External Teeth, Wheel Side | 25 |
| Type | Joint Kit, drive shaft |
| Thread Size | M24X1,5 |
| Internal Teeth, wheel side | 34 |
| Seal Diameter | 54.8 mm |
| Additional Information 2 | with groove |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
Important compatibility info
| Replaces | BSG3283 |
| Length | 183 mm |
| Inner diameter 1 | 17 mm |
| Inner diameter 2 | 60 mm |
| Function | Bellow Kit, steering |
| Material | Rubber |
| Additional Information 2 | with clamps |
| Type | Bellow Kit, steering |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Bearing Code | Gen 2 |
| Placement on Vehicle | Rear Axle |
| Additional Information 2 | with integrated ABS sensor |
| Inner diameter 1 | 25 mm |
| Outer diameter 1 | 129 mm |
| Width 1 | 59 mm |
| Tightening Torque | 200 Nm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Inner diameter 1 | 36 mm |
| Inner diameter 2 | 85 mm |
| Length | 116 mm |
| Material | Thermoplast |
| Type | Bellow Kit, drive shaft |
| Lubrication | with grease lubrication |
| Additional Information 2 | with clamps |
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Length | 135 mm |
| Inner diameter 2 | 87 mm |
| Inner diameter 1 | 28 mm |
| Type | Bellow Kit, drive shaft |
| Material | Polychloroprene (Neoprene) |
| Additional Information 2 | with clamps |
| Lubrication | with grease lubrication |
Important compatibility info
| Distance of fastening bolts | 86 mm |
| Additional Information 2 | with bearing |
| Function | Suspension Strut Support Mount |
| Inner diameter | 14 mm |
| Height | 24 mm |
| Type | Suspension Strut Support Mount |
| Paired article numbers | FSM5117 |
Additional Information
- 1x Borg & Beck Suspension Strut Support Mount (BSM5354)
- 1x Borg & Beck Rolling Bearing, suspension strut support mount (BSM5020)
Important compatibility info
| Placement on Vehicle | Front Axle, Left, Right, Upper |
| Function | Spring Seat |
| Type | Spring Seat |
Important compatibility info
| Mounting Type | Bolted |
| Version | Fitting Kit |
| Thread Measurement 2 | M38x1.5 |
| Thread Measurement 1 | M14x1.5 |
| Bore Diameter 1 | 15.6 mm |
| Function | Ball Joint |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Replaces | BBJ5541 |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















