Important compatibility info
Voltage | 12 V |
Operating Mode | Electric-pneumatic |
Number of Connectors / Ports | 1 |
Weight | 0.070 kg |
Type | Boost Pressure Control Valve |
Function | Boost Pressure Control Valve |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Weight | 1.045 kg |
Type | Mounting, engine |
for OE number | 56 82 534 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mass Air Flow Sensor |
Resistor Type | Hot-wire Sensor |
Type | Mass Air Flow Sensor |
Housing Type | without housing |
Weight | 0.04 kg |
Number of Connectors / Ports | 4 |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.975 kg |
Number of mounting bores | 3 |
Function | Central Slave Cylinder, clutch |
Fill Medium | Brake Fluid |
Type | Central Slave Cylinder, clutch |
Additional Information 2 | without sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.970 kg |
Placement on Vehicle | Lower Front Axle, Left |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 14523 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 107629 |
Number of Connectors / Ports | 2 |
Weight | 0.046 kg |
Cable Length | 620 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Thermostat, coolant |
Weight | 0.12 kg |
Outer diameter | 67 mm |
Opening Temperature | 92 °C |
Type | Thermostat, coolant |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Mounting points diameter | 20 mm |
Pipe Diameter | 45 mm |
Max. Length | 373 mm |
Weight | 4.7 kg |
Shock Absorber Mounting Type | Top eye, Bottom Yoke |
Function | Shock Absorber, driver cab suspension |
Type | Shock Absorber, driver cab suspension |
Min. Length | 430 mm |
Operating Mode | Mechanical |
Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.050 kg |
Function | Vacuum Pump, braking system |
Type | Vacuum Pump, braking system |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Aluminium |
Type | Wheel Brake Cylinder |
Function | Wheel Brake Cylinder |
Weight | 0.206 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.020 kg |
Colour | Orange |
Function | Oil Dipstick |
Length from grip collar to min. marking | 587 mm |
Length from grip collar to max. marking | 568 mm |
Extra Description | febi Plus |
Type | Oil Dipstick |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.500 kg |
Placement on Vehicle | Front Axle Left |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 24533 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.52 kg |
Material | Rubber/Metal |
Placement on Vehicle | Front Axle |
Outer diameter | 109 mm |
Function | Repair Kit, suspension strut support mount |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | with ball bearing |
Inner diameter | 13 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Dust Cover Kit, shock absorber |
Placement on Vehicle | Front Axle |
Weight | 0.177 kg |
Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (102273)
- 2x Febi Protective Cap/Bellow, shock absorber (180628)
Important compatibility info
Material | Sheet Steel |
Steering arm type | Control Arm |
Additional Information | with rubber mounts |
Cone Size | 18 mm |
Paired article numbers | 193640 |
Type | Control/Trailing Arm, wheel suspension |
Weight | 3.9 kg |
Placement on Vehicle | Front Axle Right |
Additional Information 2 | with ball joint |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Rubber Buffer, suspension |
Length | 127 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | PU (Polyurethane) |
Outer diameter | 66 mm |
Weight | 0.142 kg |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Weight | 0.600 kg |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.022 kg |
Outer diameter | 31 mm |
Thickness | 3.6 mm |
Function | Adjusting Disc, valve clearance |
Type | Adjusting Disc, valve clearance |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 7.2 kg |
Charge Type | Exhaust Turbocharger |
Type | Charger, charging (supercharged/turbocharged) |
Additionally required parts | Mounting Kit |
Function | Charger, charging (supercharged/turbocharged) |
Extra Description | Garrett Turbo REMAN |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.08 kg |
Length | 68 mm |
Outer diameter | 18 mm |
Function | Tensioner, timing chain |
Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023