Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 3.28 kg |
| Placement on Vehicle | Front Axle |
| Length | 1045 mm |
| Function | Stabiliser Bar, suspension |
| Stabiliser Diameter | 19 mm |
| Additional Information | with rubber mounts |
| Type | Stabiliser Bar, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.48
Important compatibility info
| Placement on Vehicle | Front Axle, inner |
| Width | 78 mm |
| Outer diameter | 150 mm |
| Weight | 5.757 kg |
| Function | Wheel Bearing |
| Type | Wheel Bearing |
| Bearing Type | Tapered Roller Bearing |
| Inner diameter | 70 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.49
Important compatibility info
| Weight | 6.851 kg |
| Type | Parts Set, maintenance service |
| Function | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Seal Ring (40687)
- 1x Febi Urea Filter (100593)
- 1x Febi Fuel filter (28068)
- 1x Febi Fuel filter (47974)
- 1x Febi Air Filter (30443)
- 1x Febi Oil Filter (45320)
- 1x Febi Filter, cabin air (18759)
- 1x Febi Fuel filter (31397)
- 1x Febi Air Dryer Cartridge, compressed-air system (34322)
£123.49
Important compatibility info
| Type | Alternator |
| Function | Alternator |
| Voltage | 12 V |
| Belt Pulley Diameter | 55 mm |
| Alternator Charge Current | 120 A |
| Pulleys | with belt pulley |
| Weight | 6.5 kg |
| Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.49
Important compatibility info
| Extra Description | ProKit |
| Function | Tie Rod |
| Type | Tie Rod |
| Pipe Diameter | 52 mm |
| Additional Information 2 | with crown nut |
| Outer diameter | 52 mm |
| Length | 1512 mm |
| Placement on Vehicle | Front Axle |
| Weight | 14.670 kg |
| Internal Thread Size | M35 x 1,5 LHT |
| External Thread Size | M20 x 1,5 |
| Cone Size | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.49
Important compatibility info
| Weight | 5.0 kg |
| Belt Pulley Diameter | 54 mm |
| Alternator Charge Current | 70 A |
| Number of Ribs | 4 |
| Pulleys | with belt pulley |
| Voltage | 12 V |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.49
Important compatibility info
| Weight | 0.767 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 126 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | G53HP, G53HR |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (33892)
- 1x Febi Guide, timing chain (30546)
- 1x Febi Guide, timing chain (30547)
- 1x Febi Tensioner, timing chain (30548)
- 1x Febi Gasket, timing case (102340)
- 2x Febi Screw (100646)
- 1x Febi Screw Plug, oil sump (46332)
- 1x Febi Seal Ring, oil drain plug (04054)
£123.50
Important compatibility info
| Weight | 2.460 kg |
| Width | 81 mm |
| Outer diameter | 165 mm |
| Inner diameter | 32 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.52
Important compatibility info
| Weight | 11.700 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
| Placement on Vehicle | Front Axle |
| Length | 566 mm |
| Steering arm type | Trailing Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.62
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 90 A |
| Belt Pulley Diameter | 68 mm |
| Weight | 5.6 kg |
| Function | Alternator |
| Type | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.64
Important compatibility info
| Number of Teeth | 119 |
| Weight | 1.343 kg |
| Belts | with rounded tooth profile |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Water pump impeller material | Plastic |
| Width of castor bearing surface | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (188804)
- 1x Febi Water Pump, engine cooling (36204)
£123.66
Important compatibility info
| Number of Teeth | 133 |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Width | 26 mm |
| Surface | Coated |
| Weight | 1.685 kg |
| for OE number | 82 01 038 625 S1 |
| Belts | with rounded tooth profile |
| Water pump impeller material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (43669)
- 1x Febi Water Pump, engine cooling (39459)
£123.75
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 691 mm |
| Mounting points diameter | 14 mm |
| Pipe Diameter | 60 mm. 50 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Weight | 3.15 kg |
| Shock Absorber Type | Oil Pressure |
| Min. Length | 419 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.76
Important compatibility info
| Weight | 0.665 kg |
| Length | 110 mm |
| Width | 114 mm |
| Thickness | 100 mm |
| Type | Pump, fuel pre-supply |
| Function | Pump, fuel pre-supply |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.79
Important compatibility info
| Function | Window Regulator |
| Type | Window Regulator |
| Operating Mode | Electric |
| Paired article numbers | 176514 |
| Weight | 1.441 kg |
| Placement on Vehicle | Right Front |
| Additional Information | with electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.80
Important compatibility info
| Steering arm type | Trailing Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle |
| Length | 600 mm |
| Weight | 6.970 kg |
| Hole Spacing | 50 mm |
| Mounting points diameter | 70 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.80
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Ignition Coil |
| Weight | 0.23 kg |
| Type | Ignition Coil |
| for OE number | 55229959 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.85
Important compatibility info
| Operating Mode | Automatic |
| Width of castor bearing surface | 32 mm |
| Function | Belt Tensioner, V-ribbed belt |
| Outer diameter | 75 mm |
| Material | Metal |
| Type | Belt Tensioner, V-ribbed belt |
| Weight | 1.624 kg |
| Quantity | 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.86
Important compatibility info
| Additional Information | with rubber mounts |
| Weight | 4.68 kg |
| Stabiliser Diameter | 25.4 mm |
| Placement on Vehicle | Front Axle |
| Type | Stabiliser Bar, suspension |
| Function | Stabiliser Bar, suspension |
| Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (171121)
- 2x Febi Link/Coupling Rod, stabiliser bar (24122)
£123.94
Important compatibility info
| Placement on Vehicle | Right |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Aluminium |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 2.0 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.96
Important compatibility info
| Weight | 1.37 kg |
| Outer diameter | 420 mm |
| Thickness | 74 mm |
| Inner diameter | 10.5 mm |
| Inner diameter 1 | 17.5 mm |
| Number of Wings | 7 |
| Function | Fan, engine cooling |
| Type | Fan, engine cooling |
| for OE number | 000 200 97 23 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.98
Important compatibility info
| Additional Information 2 | with spacer plate |
| Weight | 1.935 kg |
| Type | Cylinder Head, air compressor |
| Function | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.98
Important compatibility info
| Belt Pulley Diameter | 56 mm |
| for OE number | 028 903 028 DX |
| Alternator Charge Current | 90 A |
| Function | Alternator |
| Type | Alternator |
| Voltage | 12 V |
| Number of Ribs | 6 |
| Weight | 5.6 kg |
| Pulleys | with freewheel belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.03
Important compatibility info
| Function | Cable Pull, manual transmission |
| Inner length 1 | 722 mm |
| Type | Cable Pull, manual transmission |
| Weight | 1.258 kg |
| Inner length 2 | 742 mm |
| Outer length 1 | 990 mm |
| Outer length 2 | 1010 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.05
Important compatibility info
| Placement on Vehicle | Front |
| Weight | 2.098 kg |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.05
Important compatibility info
| Weight | 3.71 kg |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 605 mm |
| Min. Length | 410 mm |
| Pipe Diameter | 63 mm. 55 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.10
Important compatibility info
| Outer diameter | 259 mm. 205 mm |
| Weight | 9.5 kg |
| Placement on Vehicle | Rear Axle |
| Function | Bellow, air suspension |
| Thickness | 510 mm. 138 mm |
| External Thread Size | M24 x 1,5, M16 x 1,5, M10 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.14
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.177 kg |
| Cable Length | 2320 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated, Diagnostic Probe |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| Placement on Vehicle | Right |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.19
Important compatibility info
| Width | 24 mm |
| Surface | Coated |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| for OE number | 16 06 305 S1 |
| Number of Teeth | 168 |
| Weight | 1.777 kg |
| Belts | with rounded tooth profile |
| Water pump impeller material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (28375)
- 1x Febi Water Pump, engine cooling (26771)
£124.21
Important compatibility info
| Weight | 2.888 kg |
| Length | 555 mm |
| Width | 348 mm |
| Material | PP (Polypropylene) |
| Thickness | 159 mm |
| Function | Expansion Tank, coolant |
| Internal Thread Size | M72 x 1,5 |
| External Thread Size | M48 x 1,5 |
| Fill quantity | 8.5 l |
| Type | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.23
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Weight | 3.345 kg |
| Placement on Vehicle | both sides |
| Internal Thread Size | M16 x 1,5, M18 x 1,5 |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 960 241 63 13 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.27
Important compatibility info
| Number of Teeth | 141 |
| Function | Water Pump & Timing Belt Kit |
| Water pump impeller material | Metal |
| Weight | 2.65 kg |
| Type | Water Pump & Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (24756)
- 1x Febi Water Pump, engine cooling (24360)
£124.32
Important compatibility info
| Weight | 5.19 kg |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 472 mm |
| Min. Length | 332 mm |
| Pipe Diameter | 80 mm. 70 mm |
| Mounting points diameter | 24 mm |
| Piston conrod diameter | 22 mm |
| Function | Shock Absorber |
| Replaces | 20056; 20070 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.33
Important compatibility info
| Weight | 1.154 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for turbocharger (art. no.) | 186663, 186735 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.38
Important compatibility info
| Weight | 0.882 kg |
| for OE number | 03C 133 062 T |
| Voltage | 12 V |
| Operating Mode | Electric |
| Number of Connectors / Ports | 6 |
| Type | Throttle body |
| Function | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.39
Important compatibility info
| Function | Timing Chain Kit |
| Chain Type | Simplex, Closed chain |
| Weight | 1.42 kg |
| Number of Chain Links | 138 |
| Replaces | 47661 |
| Type | Timing Chain Kit |
| Timing Chain Size | G53HR |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (29867)
- 1x Febi Tensioner, timing chain (21275)
- 1x Febi Guide, timing chain (29534)
- 1x Febi Guide, timing chain (29535)
- 1x Febi Sliding Rail Bolts, timing chain (47398)
- 1x Febi Sliding Rail Bolts, timing chain (47397)
- 2x Febi Screw (47583)
- 1x Febi Sprocket, crankshaft (30458)
£124.44
Important compatibility info
| Width | 157 mm |
| Outer diameter | 157 mm |
| Inner diameter | 9 mm |
| Number of Ribs | 4 |
| Parameter | 5PK |
| Function | Belt Pulley, crankshaft |
| Weight | 2.2 kg |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.44
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1036 mm |
| Additional Information | with nuts |
| Rod/Strut | Push Rod |
| Weight | 13.270 kg |
| Pipe Diameter | 62 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.45
Important compatibility info
| Placement on Vehicle | Front Axle |
| Additional Information | with lock nut |
| Rod/Strut | Push Rod |
| Weight | 11.370 kg |
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 62 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.45
Important compatibility info
| Function | Clutch Booster |
| Weight | 2.376 kg |
| Type | Clutch Booster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.48
Important compatibility info
| Function | Water Pump, engine cooling |
| Material | Aluminium |
| Water pump impeller material | Plastic |
| Seal Material | Rubber/Metal, Rubber |
| Number of Wings | 6 |
| Number of Teeth | 22 |
| Weight | 1.49 kg |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.48
Important compatibility info
| Length | 840 mm |
| Outer diameter | 52.0 mm |
| Rod/Strut | Push Rod |
| Outer thread | M27 x 1,5 mm |
| Driver Position | for left-hand drive vehicles |
| Weight | 9.42 kg |
| Inner thread | M30 x 1,5 RHT mm |
| Cone Size | 32 mm |
| Pipe Diameter | 52 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
£124.48
Important compatibility info
| Weight | 5.500 kg |
| Steering arm type | Control Arm |
| Paired article numbers | 15695 |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.48
Important compatibility info
| Weight | 0.4 kg |
| Width | 36 mm |
| Outer diameter | 50 mm |
| Thickness | 180 mm |
| Inner diameter | 35 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with rolling bearing |
| Bearing Type | Rolling Bearing |
| Hole Spacing | 160 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.48
Important compatibility info
| Cone Size | 24 mm |
| Pipe Diameter | 56 mm |
| Adjustable | Adjustable on one side |
| Internal Thread Size | M30 x 1,5 |
| Rod/Strut | Push Rod |
| Placement on Vehicle | Front Axle, outer |
| Length | 1064 mm |
| Extra Description | ProKit |
| External Thread Size | M20 x 1,5 |
| Weight | 12.86 kg |
| Function | Centre Rod Assembly |
| Cone Size 2 | 29 mm |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.48
Important compatibility info
| Weight | 12.05 kg |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Placement on Vehicle | Front Axle |
| Length | 1315 mm |
| Cone Size | 30 mm |
| Pipe Diameter | 50 mm |
| Type | Tie Rod |
| Function | Tie Rod |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.48
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Type | Timing Chain Kit |
| Number of Chain Links | 148 |
| Timing Chain Size | G53RING |
| Extra Description | Basic Short Kit |
| Weight | 0.877 kg |
| Function | Timing Chain Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (184834)
- 1x Febi Tensioner, timing chain (182806)
- 1x Febi Guide, timing chain (183442)
- 1x Febi Guide, timing chain (183265)
- 1x Febi Guide, timing chain (183266)
£124.49
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 1.500 kg |
| Type | Mounting, engine |
| for OE number | 222 240 61 00 |
| Hole Spacing | 175 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.49
Important compatibility info
| Function | Vacuum Pump, braking system |
| Weight | 0.804 kg |
| Additional Information | with gasket/seal |
| Type | Vacuum Pump, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.49
Important compatibility info
| External Teeth, Diff.Side | 22 |
| Min. Length | 605 mm |
| Thread Size | M20x1,5 |
| Type | Drive Shaft |
| External Teeth, Wheel Side | 25 |
| Wheel Sided Joint Diameter | 76.4 mm |
| Transmission-side joint diameter | 76 mm |
| Weight | 4.680 kg |
| Function | Drive Shaft |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.51
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023