Proud to be a UK-based company
Contact us
Important compatibility info
| Outer diameter | 48 mm |
| Steering arm type | Triangular Control Arm (CV) |
| Function | Control/Trailing Arm, wheel suspension |
| Wishbone Angle Measurement | 56 ° |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 21.63 kg |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£177.96
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle, Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 489 mm |
| Min. Length | 309 mm |
| Pipe Diameter | 70 mm. 60 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Weight | 4.63 kg |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£178.09
Important compatibility info
| Type | Alternator |
| Weight | 7.0 kg |
| Function | Alternator |
| Voltage | 12 V |
| Pulleys | without belt pulley |
| Alternator Charge Current | 180 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£178.29
Important compatibility info
| Function | Gear, air compressor |
| Weight | 1.861 kg |
| Type | Gear, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£178.37
Important compatibility info
| Seal Material | Rubber/Metal, Rubber |
| Number of Wings | 12 |
| Material | Grey Cast Iron |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Weight | 12.6 kg |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| for OE number | 542 200 25 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£178.37
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Number of Chain Links | 134 |
| Weight | 2.930 kg |
| for OE number | 1 717 599 S2 |
| Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (182108)
- 1x Febi Tensioner, timing chain (46511)
- 1x Febi Guide, timing chain (179385)
- 1x Febi Guide, timing chain (179396)
- 1x Febi Guide, timing chain (179382)
- 1x Febi Guide, timing chain (46773)
- 2x Febi Gear/Sprocket, camshaft (181607)
- 1x Febi Gear, injection pump (181629)
- 1x Febi Sprocket, crankshaft (183177)
- 1x Febi Gasket, timing case cover (109620)
- 1x Febi Shaft Seal, crankshaft (103216)
£178.41
Important compatibility info
| Tensile Cord Material | Aramid |
| Length | 1061 mm |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | V-Ribbed Belt Set |
| Type | V-Ribbed Belt Set |
| Alternator type | for starter generator |
| Weight | 1.217 kg |
| Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (184946)
- 1x Febi Belt Tensioner, v-ribbed belt (175858)
£178.43
Important compatibility info
| Placement on Vehicle | Front |
| Length | 155 mm |
| Outer diameter | 160 mm |
| Thickness | 32 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Weight | 1.205 kg |
| Type | Joint, propshaft |
| Function | Joint, propshaft |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (21195)
- 1x Febi Assembly Kit, propshaft joint (177067)
£178.93
Important compatibility info
| Weight | 0.840 kg |
| Thickness | 44 mm |
| Inner diameter | 13 mm |
| Number of Teeth | 38 |
| Paired article numbers | 47571 |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Placement on Vehicle | Exhaust Side |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£178.93
Important compatibility info
| Operating Mode | Electronic |
| Number of Connectors / Ports | 6 |
| Weight | 0.6 kg |
| Connector Shape | angular |
| Type | Accelerator Pedal |
| Function | Accelerator Pedal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£178.98
Important compatibility info
| Additional Information | with gaskets/seals |
| Material | Plastic |
| Colour | Black |
| Number of Connectors / Ports | 2. 3 |
| Weight | 1.455 kg |
| Type | Fitting, intake manifold |
| Function | Fitting, intake manifold |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£179.03
Important compatibility info
| Number of Ribs | 11 |
| Voltage | 24 V |
| Pulleys | with belt pulley |
| Function | Alternator |
| Alternator Charge Current | 80 A |
| Belt Pulley Diameter | 76 mm |
| Weight | 7.43 kg |
| Type | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£179.07
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 149.5 mm |
| Outer diameter | 385 mm |
| Additional Information 2 | without wheel bearing |
| Inner diameter | 138 mm |
| Bolt Hole Circle Diameter | 335 mm |
| Weight | 21.600 kg |
| Type | Wheel Hub |
| Function | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£179.17
Important compatibility info
| Length | 142 mm |
| Height | 130 mm |
| Width | 105 mm |
| Additional Information | with holder |
| Filter type | with housing cover |
| Weight | 1.08 kg |
| Type | Cover, fuel filter |
| Function | Cover, fuel filter |
| External Thread Size | 1" - 14 UNF |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£179.19
Important compatibility info
| Operating Pressure | 165 bar |
| Function | Hydraulic Pump, steering |
| Rotation Direction | Anticlockwise rotation |
| Number of Connectors / Ports | 2 |
| Mounting points diameter | 11 mm |
| Internal Thread Size | M26 x 1,5, M18 x 1,5 |
| Hole Spacing | 104 mm |
| Weight | 3.425 kg |
| Type | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£179.22
Important compatibility info
| Outer diameter | 158 mm |
| Inner diameter | 51 mm |
| Weight | 1.754 kg |
| Parameter | 6PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£179.23
Important compatibility info
| Additional Information | with gaskets/seals |
| Material | Plastic |
| Colour | Black |
| Number of Connectors / Ports | 2. 3 |
| Weight | 1.440 kg |
| Type | Fitting, intake manifold |
| Function | Fitting, intake manifold |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£179.26
Important compatibility info
| Extra Description | febi Plus |
| Function | Cylinder Head Cover |
| Type | Cylinder Head Cover |
| Heating / Cooling | with jiggle pin |
| Weight | 2.967 kg |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£179.42
Important compatibility info
| Weight | 1.589 kg |
| Surface | Coated |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 130 |
| Timing Chain Size | G53HS |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Extra Description | Full Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49583)
- 1x Febi Tensioner, timing chain (34161)
- 1x Febi Gear Set, engine timing (33033)
- 2x Febi Bolt, camshaft gear (33034)
- 1x Febi Bolt, crankshaft gear (39116)
- 1x Febi Guide, timing chain (28517)
- 1x Febi Screw (33036)
- 1x Febi Guide, timing chain (28516)
- 2x Febi Screw (33037)
- 2x Febi Screw (33038)
- 1x Febi Quill, cylinder head (33039)
- 1x Febi Guide, timing chain (28518)
- 1x Febi Shaft Seal, oil pump (31144)
- 1x Febi Gasket, water pump (49406)
- 1x Febi Gasket, timing case cover (33079)
- 1x Febi Seal, thermostat (49408)
- 1x Febi Gasket, cylinder head cover (43629)
£179.48
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| External Teeth, Wheel Side | 31 |
| Paired article numbers | 183825 |
| Min. Length | 555 mm |
| Additional Information 2 | with nut |
| ABS Ring Diameter | 97 mm |
| External Teeth, Diff.Side | 29 |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Weight | 7.502 kg |
| Thread Size | M24x1,5 |
| Wheel Sided Joint Diameter | 92.3 mm |
| Transmission-side joint diameter | 91.1 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£179.77
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023