Proud to be a UK-based company
Contact usBrake Hoses 
Fits CITROËN RELAY I Van (230L) 2.8 HDi
(2000)
Important compatibility info
| Length | 339 mm |
| Outer thread 2 | M10x1 mm |
| Type | Brake Hose |
| Function | Brake Hose |
| Inner thread 1 | M10x1 mm |
£8.60
Important compatibility info
| Type | Brake Hose |
| Thread Measurement 2 | Male M10 x 1 |
| Model | BOXER RELAY |
| Length 1 | 360 mm |
| Manufacturer | CITROEN PEUGEOT |
| Thread Measurement 1 | Female M10 x 1 |
| Function | Brake Hose |
£9.41
Important compatibility info
| Length | 340 mm |
| Thread Measurement 1 | M10X1 |
| Thread Measurement 2 | M10X1 |
| Function | Brake Hose |
| Type | Brake Hose |
£9.84
Important compatibility info
| Type | Brake Hose |
| Function | Brake Hose |
| Thread Measurement 2 | Female M10 x 1 |
| Thread Measurement 1 | Male M10 x 1 |
| Length 1 | 384 mm |
| Model | BOXER DUCATO RELAY |
| Manufacturer | CITROEN FIAT PEUGEOT |
£10.28
Important compatibility info
| Thread Measurement 1 | M10x1 |
| Thread Measurement 2 | M10x1 |
| Length | 360 mm |
| Function | Brake Hose |
| Type | Brake Hose |
| Thread Type | with internal thread, with external thread |
£11.27
Important compatibility info
| Manufacturer | CITROEN PEUGEOT |
| Model | BOXER RELAY |
| Type | Brake Hose |
| Function | Brake Hose |
| Length 1 | 500 mm |
| Thread Measurement 1 | Female M10 x 1 |
| Thread Measurement 2 | Male M10 x 1 |
| Placement on Vehicle | Front Axle, Lower |
£11.65
Important compatibility info
| Length 1 | 475 mm |
| Type | Brake Hose |
| Manufacturer | CITROEN PEUGEOT |
| Placement on Vehicle | Front Axle, Upper |
| Thread Measurement 2 | Male M10 x 1 |
| Thread Measurement 1 | Female M10 x 1 |
| Function | Brake Hose |
| Model | BOXER RELAY |
£11.66
Important compatibility info
| External Thread Size | M10 x 1 |
| Internal Thread Size | M10 x 1 |
| Weight | 0.13 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower, at brake caliper |
| Length | 485 mm |
| Spanner Size | 14, 17 |
| Type | Brake Hose |
| Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.66
Important compatibility info
| Length 1 | 338 mm |
| Length 2 | 315 mm |
| Outer thread | M10X1SF mm |
| Inner thread | M10X1MM mm |
| Function | Brake Hose |
| Type | Brake Hose |
| Placement on Vehicle | Rear Axle Left |
£11.77
Important compatibility info
| Thread Measurement 2 | M10X1MM |
| Thread Measurement 1 | M10x1SF |
| Length 1 | 397 mm |
| Length 2 | 374 mm |
| Function | Brake Hose |
| Type | Brake Hose |
| Placement on Vehicle | Rear Axle Right |
£11.77
What is a brake hose?
Brake hoses are flexible pipes that connect the metal brake lines to the brake caliper or brake cylinder. They can also be used to connect 2 metal brake lines together. Brake hoses are made out of rubber or some other flexible tubing. This is so that the part they are connected to can move freely without causing damage to the hose.
There are different types of connectors on the end of these hoses depending on the vehicles design requirements. These are:
Male screw connector
Female screw connector
Banjo connector
How do I choose the correct brake hose?
Brake systems are often uprated at the time of manufacture. For example some vehicles are fitted with a sport pack or some other performance upgrade. Some car makers use different brake systems depending on which country they had their vehicle manufactured. Whatever the reason there can be several factors that determine which brake hoses are correct.
These can be:
Type of connector
Length of the brake hose
Difference in the original manufacturer brand of the brake system. The makers of the brake system on a vehicle can be different especially when a model of vehicle is manufactured in different countries and then brought to the UK
If the vehicle has ABS
Brake system code. This is commonly used with German vehicle brands
Sports pack or other factory upgrades
VIN (chassis number sequence. Sometimes the first 3 letters of the chassis number or the last 6, 7 or 8 characters will determine the correct part
Vehicle manufacture date (this is not the date the vehicle was registered but the date it was made
What brand of brake hose should I choose?
Bosch and TRW make brake parts for the original car manufacturers so these are classed as premium brands. There are other brands such as Apec, Borg & Beck, Delphi, Febi and Quinton Hazell that manufacture high quality brake hoses and at a lower price point.
All brake parts are designed to meet the original specification so which brand you choose is down to your budget and the brand you trust.
How can I tell that my brake hose needs replacing?
Safety is paramount so if you have any issues with your braking system we would always recommend that you have your vehicle inspected by a qualified mechanic to receive an accurate diagnosis.
Some of the symptoms of a faulty brake hose are:
Brake pedal feels soft or spongy when pressed
Brake fluid is leaking from the hose or hose connector
Brakes do not work
Brake warning light on the dashboard
