Brake Discs Brake Discs
Fits BMW 4 Convertible (F33, F83) 435 i
(2013)

This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Construction Year from: 03/2014; Fitting Position: Rear Axle; Braking System: for vehicles with Performance brakes
Drill Diameter, up to 16.5 mm
Rotor Style Vented, two-piece brake disc, slotted/perforated
Centering Diameter 75 mm
Surface Coated
Machining High-carbon
Height 66.2 mm
Type Brake Disc Rotor
Fulfils ECE norm ECE-R90
Placement on Vehicle Rear Axle
Additional Information 2 with bolts/screws
Outer diameter 345 mm
Function Brake Disc
Brake Disc Thickness 24 mm
Number of Holes 5
Minimum thickness 22.4 mm
Bolt Hole Circle Diameter 120 mm
Bosch 0986479E15 2x Brake Discs Pair Vented
ONLY
£231.07
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Construction Year from: 03/2014; Fitting Position: Rear Axle; Braking System: for vehicles without Performance brakes; Braking System: for vehicles with reinforced brakes; Vehicle Equipment Line/Variant: Sport
Additional Information 2 with bolts/screws
Outer diameter 345 mm
Height 66.2 mm
Brake Disc Thickness 24 mm
Number of Holes 5
Minimum thickness 22.4 mm
Rotor Style two-piece brake disc, Vented
Placement on Vehicle Rear Axle
Centering Diameter 75 mm
Bolt Hole Circle Diameter 120 mm
Drill Diameter, up to 16.5 mm
Function Brake Disc
Fulfils ECE norm ECE-R90
Type Brake Disc Rotor
Machining High-carbon
Surface Coated
Bosch 0986479E17 2x Brake Discs Pair Vented
ONLY
£165.13
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Construction Year from: 03/2014; Fitting Position: Front Axle; Braking System: for vehicles with reinforced brakes; Vehicle Equipment Line/Variant: Sport; Brake Disc Type: solid; for special equipment code: S2NHA
Bolt Hole Circle Diameter 120 mm
Minimum thickness 28.4 mm
Number of Holes 5
Rotor Style two-piece brake disc, Vented
Placement on Vehicle Front Axle
Height 73.1 mm
Centering Diameter 79 mm
Drill Diameter, up to 16.5 mm
Function Brake Disc
Surface Coated
Fulfils ECE norm ECE-R90
Type Brake Disc Rotor
Machining High-carbon
Brake Disc Thickness 30 mm
Additional Information 2 with bolts/screws
Outer diameter 370 mm
Bosch 0986479E21 Brake Disc Single Vented
ONLY
£122.33
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Rear Axle; Braking System: for vehicles with a standard brake system; not for special equipment code: S2NHA
Centering Diameter 75 mm
Type Brake Disc Rotor
Surface Coated
Placement on Vehicle Rear Axle
Outer diameter 330 mm
Height 66 mm
Function Brake Disc
Extra Description PRIME LINE - UV Coated
Additional Information 2 with bolts/screws
Rotor Style internally vented
Machining High-carbon
Minimum thickness 18.4 mm
Number of Holes 5
Brake Disc Thickness 20 mm
Brembo 09.C117.11 2x Brake Discs Pair Vented
ONLY
£97.07
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Braking System: for vehicles with M-performance brakes; for special equipment code: S2NHA
Rotor Style internally vented, slotted/perforated, two-piece brake disc, Aluminium Brake Disc Hub
Centering Diameter 79 mm
Surface Coated
Machining High-carbon
Outer diameter 370 mm
Extra Description PRIME LINE - Composite
Type Brake Disc Rotor
Function Brake Disc
Brake Disc Thickness 30 mm
Number of Holes 5
Minimum thickness 28.4 mm
Additional Information 2 with bolts/screws
Placement on Vehicle Front Axle
Height 73 mm

Additional Information

Brief Information

PVT vented disc. The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking.

Brembo 09.C394.13 2x Brake Discs Pair Vented
ONLY
£362.83
Quantity:

Page 5 of 11
Brake Discs

What is a brake disc?

A brake disc is an essential part of a vehicles braking system. These circular metal disks work with the brake pads to create the necessary friction required to slow down or stop the vehicle. There are different types of brake discs available.


These are:

  • Solid

  • Vented

  • Vented & drilled

  • Vented & drilled and grooved


What comes in a brake disc set?

Most of the brake discs we sell are sold in pairs. An order of 1 set will come with 2 discs unless stated otherwise). On rare occasion brake discs, especially for performance vehicles, are provided for the ‘left’ and ‘right’ side of the vehicle. These discs are sold as singles for the side you need. Some discs are too heavy to sell in pairs so have to be sold as singles for shipping purposes.

We sell discs in pairs primarily for safety reasons. It is important that brake performance be evenly distributed between the left and right side of the vehicle.

We would always recommend that you change the brake pads at the same time as the discs. Any uneven pad wear can negatively affect the new brake discs and their performance.


How do I choose the correct brake discs?

Brake discs can be one of the most incorrectly purchased part for a vehicle. There can be a number of different factors that determine which are the correct brake disc replacements. Not only that, there are often a number of different options listed as correct for the same model of vehicle where in fact only 1 set is correct. The factors that need to be taken into consideration include the following:

  • The diameter of the disc

  • The thickness of the disc

  • How many holes use to mount the disc or wheel

  • Difference in the original manufacturer brand of the brake system. The makers of the brake system on a vehicle can be different especially when a model of vehicle is manufactured in different countries and then brought to the UK

  • VIN (chassis number sequence. Sometimes the first 3 letters of the chassis number or the last 6, 7 or 8 characters will determine the correct part

  • Brake system code. This is commonly used with German vehicle brands

  • Sports pack or other factory upgrades

  • If the vehicle has ABS

  • If the vehicle has rear drums can alter which front discs are correct


What brand of brake disc should I choose?

There are number of brands of brake discs that you can choose. Some brands such as Bosch and TRW manufacture brake discs for the original car brands however there are many aftermarket brands of the highest quality that meet or exceed the original specifications. Brands such as Blue Print, Febi, Quinton Hazell and Borg & Beck offer long warranties to show the confidence they have in their parts. The choice of brand is up to you but in many cases it is based on the brand's reputation and your budget.


How can I tell my brake discs needs replacing?

We would always recommend that you have your vehicle inspected by a qualified mechanic to receive an accurate diagnosis that your brake discs needs replacement. Some of the symptoms of failing discs are:

  • Noisy or squealing brakes

  • It takes longer to slow the vehicle down

  • The car vibrates when pressing the brake pedal

  • There is damage on the face of the disc


Your feedback more
Trusted reviews more
Secure payments more
Simple returns more