Engine Oils

• Removes sludge and carbon deposits
• Improves engine performance

• Directions For Use: 1. With a warm engine, drain the used oil, 2. Replace the sump plug, refill with FLUSHING OIL., 3. Start engine and fast idle for 10 minutes. 4. Drain and refill with the correct new engine oil.

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most. Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.

Castrol EDGE 0W-20 C5 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends: ACEA C5, ACEA C6, API SP, ILSAC GF-6 or earlier specification 0W-20 lubricant.

Castrol EDGE 0W-20 C5 is approved for use in vehicles from leading manufacturers, please refer to the specifications section and your owners handbook.

GM dexos1(TM) Approved-GEN 3 : D355BKDD082

Castrol EDGE 0W-20 C5 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low-temperature performance

Specification

• ACEA C5, C6
• API SP
• ILSAC GF-6
• GM dexos1(TM) Gen 3
• Jaguar Land Rover engine oil specification STJLR.03.5006
• MB-Approval 229.71
• Opel OV0401547
• Meets Chrysler MS 6395
• Meets Fiat 9.55535-CR1
• Meets Fiat 9.55535-GSX
• Meets Ford WSS-M2C947-A
• Meets Ford WSS-M2C947-B1

Technical Information

Engine oils: Motorcycle Motorcycle 4T eng oil -- Synthetic

• Provides ultimate engine protection for all driving condition
• Not to be used in vehicles with diesel particulate filters
• Suitable for a wide range of vehicles
• Excellent high temperature stability

• ACEA A3/B3, A3/B4 | API SN/CF
• VW 502.00 / 505.00, 229.3, GM LL-B-025, PSA B71 2296, RENAULT RN0700, RN0710, PORSCHE A40
• VW 502.00, 505.00, 501.01, MB 229.5, 229.3, GM LL-B-025, BMW LL-01, PSA B71 2296, RENAULT RN0700, RN0710, PORSCHE A40

• Provides outstanding wear protection
• Backwards compatible to Ford M2C913-A and 913-B specifications
• Delivers high performance with exceptional fuel efficiency
• Suitable for many Ford vehicles (excluding EcoBoost & EcoBlue engines)

• ACEA A5/B5, A1/B1, API SL/CF
• FORD WSS-M2C913-D, WSS-M2C913-C, JAGUAR LAND ROVER STJLR.03.5003, RENAULT RN0700
• FORD WSS-M2C913-D, WSS-M2C913-C, JAGUAR LAND ROVER STJLR.03.5003, RENAULT RN0700