Workshop Tools

• Size: 5.4 x 3.6m (18 x 12ft)
• Twin colour is reversible between silver and green and weighs 80 grams per square metre
• Highly durable, tear, stretch and UV resistant, with rust resistant metal eyelets
• Heat sealed, poly rope reinforced hem
• Tough re-usable waterproof cover with a laminate woven polyethylene construction

• The pulley shaft is held in place with the T50 Star bit on 1/2in.D socket whilst the nut is undone using the 33 teeth union nut with 19mm spanner
• Star is the equivalent of Torx - 6 sided Torx is the registered trademark of Acument Intellectual Properties, LLC
• Ideal tool for assembling and dismantling the free wheel pulley whilst charging the alternator or pulley on Bosch alternators

• SHOCKWAVE™ IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Dual hole design and groove for security accessories.
• Best fitting thanks to 6 gripping points.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.

General Information

Budd Wheel Nut Socket 21mm Sq. Budd Wheel Nut Socket 21mm Sq

• Suitable for front and rear axle wheels on many imported trucks including Isuzu, Mitsubishi Fuso and Hino
• Impact quality manufactured from Chrome Molybdenum with black phosphate finish
• Extra deep design allows removal of stud and nut
• Length 90mm x 3/4in.D
• Budd wheel nut socket 21mm square (4pt)

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• 15° offset box for better accessibility.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

General Information

Oil Filter Pliers 50mm-114mm

• Serrated jaws for additional grip on oily surfaces
• Soft grip handles
• Black treated Steel
• Handles filter diameter of 50mm - 114mm
• Long handled oil filter pliers

• Stainless steel needle and nozzle
• Pressure trigger and air control screw
• Cup Capacity: 600ml
• Air Consumption: 7 CFM
• Air pressure: 3BAR / 50PSI
• Gravity fed spray gun

• Key handle allows compressor to be tightened
• Time saver
• Allows piston and ring assembly to slide into the bore minimizing damage
• For installing piston and ring assembly into the bore
• For pistons 53mm to 125mm

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• SHOCKWAVE™ IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Dual hole design and groove for security accessories.
• Best fitting thanks to 6 gripping points.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.

• 180 degree rotating flexible heads allow you to apply leverage at any desired angle and get around obstructions in tight areas.
• Premium chrome vanadium steel provides durable life
• Heat treated for maximum strength
• 72 tooth ratchet
• Dual 180 degree swivel ratchet head design
• Mirror Polish Finish

• ASME Compliant

• 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19 mm
• Deep Metric Socket Set
• 12 Points
• Socket set features mirror polish Chrome-Plated finish for rust resistance

• Position Locking Pin
• in.Rin. Pin Prevents Locking Pin Slipping Out
• Flat Top Rubber Saddle for Smooth Engagement
• Triangular Base for Added Stability
• Sold in Pairs
• Folding Type

• UKCA /CE

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening