Workshop Tools

• Fast to fit and remove
• Suitable for flywheels with or without pilot bearing
• For single plate clutches

General Information

Thread Repair Kit M6x1.0 Thread Repair Kit M6x1.0.

• Spare insert packs available
• For repairing and restoring damaged threads
• Kit includes insertion tool, HSS drill, HSS tap and three threaded inserts

• M6x1.0

• Accommodates all sizes of powered sockets
• Holds shallow or deep sockets
• Locks sockets in place by a simple twist to the right
• Lock-a-Socket[TM] is the most versatile product for socket organization. The underside contains a full-length, high-powered, non-adhesive magnetic strip that securely attaches the socket holder to almost any clean, smooth metal surface.

• Socket Holder
• Carlyle Tools

• Chrome finish for optimal resistance to corrosion and rust.
• Ball detent securely holds the socket to the adapter.
• Universal Joint provides easier access in hard to reach spaces to get every job done, both in the garage and on the jobsite.

• Pack 2 Pces
• For use with conventional & pneumatic grease gun hosing
• Slide-on / Knuckle Joint Type
• Swivel Connector

• High quality hot-forging process provides a performance exceeding ASME standard
• Ultra thick 6 points open end provides durable performance
• High visibility colour filled size mark for easy identification during use
• ASME Compliant
• Premium Chrome Finish
• 15 degree offset dual open end

• ASME Compliant

• SHOCKWAVE™ IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Dual hole design and groove for security accessories.
• Best fitting thanks to 6 gripping points.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.

• Integrated wire cutter that can cut up to 1/4in. bolt
• Nickel-plated finish for corrosion resistance
• Durable forged CR-V jaws with induction hardened teeth for ulitimate durability
• Complies with ASME specs B107.24
• Pull-up release allows for one-handed opening when locked
• Tested to exceed 450 lbs. jaw pressure
• Hard rubber grip on handle helps prevent hand slippage

• Set also features short hex arm for tight fit access, and color coded hex key holder for convenient storage and identification.
• Keys feature ball on long arm which allows better angle of entry for hard to reach areas plus fastener control.
• Made from durable chrome vanadium w/ rugged black phosphate finish for long life and added strength.

• Hex Key Set Long Ball Short & Long Arm Metric & SAE Carlyle Hand Tools

• CR-V alloy steel for long lasting durability.
• Worldwide patent.
• Meet ANSI, DIN torque spec.
• Processing without tolerance to true present the 90 teeth 4 degrees of operation function.
• Meet DIN torque spec.
• 180 degrees flex head & extra long beam offers extreme reach and loads of leverage.
• Ratcheting box ends are designed to accommodate a variety of fasteners including both 6-and 12-point nuts.
• Reversible wrenches feature an easy-to-use reversing mechanism
• Wrenches feature a sleek, offset-head design for tight access points, slim dimensions for confined areas.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

General Information

Flameless Hot Air Blower. Flameless Hot Air Blower

• Net weight without gas 68 grams. Dimensions 110 x 27 x 85mm
• Fueled by 5.5ml butane gas which is available from newsagents and supermarkets (cigarette lighter gas)
• Includes heat shrinking tubes
• Run time approximately 20-25 minutes (at mid setting)
• Variable heat/temperature range up to 650 degrees C
• Features: Instant electronic ignition, refillable tank with see through window, stable catalytic heating system. Stable catalystic heating system

• Variable heat/temperature range up to 650 degrees C
• Run time approximately 20-25 minute
• Net weight without gas 68 grams
• Dimensions 110 x 27 x 85mm

• Qty: 2
• 1/8in. Gas BSP Male
• Flexible rubber
• Swivel ends

• 300mm (12in.)

General Information

Glow Plug Socket Set 1/4"D 3pc Glow Plug Socket Set 1/4"D 3pc.

• Sizes: 8mm, 9mm, 10mm
• Features 1/4in. Drive and universal joint
• Manufactured from Chrome Vanadium
• Super slim for improved access in tight areas

• FIXTEC: Disc changing in seconds no extra tools required.
• Only 8 mm thick enabling more surface of disc on the material.
• 12 seconds from removing the worn disc to fixing a new disc.
• Compatible to all manufacturers angle grinders up to 150 mm with standard M14 spindle thread.
• With integrated keyholes for removal of the nut with a standard pin spanner (Article number: 4932367712) in the event of the nut becoming too tight.
• Not suitable for use on angle grinders with a break or quick stop system.

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• Long panel wrenches provide additional reach and leverage on stubborn fasteners and feature an aggressive non-slip design.
• Each wrench is constructed from chrome vanadium high alloy steel and is produced using a precision hot forging process with extra emphasis on special heat treatment to provide maximum strength and durability.
• Wrenches are technician's first choice for getting the job done and come backed by unwavering commitment to detail and uncompromising quality from top to bottom of each product. Long panel wrenches feature an aggressive non-slip design.
• Mirror polish chrome-plated finish resists rust while 12-point, 15 Degree offset box ends provide precise fastener control. Non-slip jaw designs allows for higher torque and turning power in tough applications. Includes storage rack.

• Carlyle Metric 12 Point Long Non-Slip Combination Wrench - 11 mm

General Information

Riveter + 30 Rivets Riveter + 30 Rivets.

• Aluminium/Steel Rivets
• Complete with spanner for head change
• Spare jaws available Part No 2804
• Standard riveter with 2.4/3.2/4/4.8mm heads and 30 assorted rivets