Workshop Tools

• Ratcheting, self adjusting mini brake pipe cutter ideal for restricted access
• 4.75mm (3/16in.) with ratchet handle
• Automatic self adjusting for faster cutting
• Extra leverage due to handle length over standard cutter. To further increase leverage use the ¼” drive square in the end of the handle
• Fast and accurate operation, ideal for under vehicle use

General Information

Diesel Injector Remover - VAG TDi

• No solenoid removal required
• Use in accordance with OEM instructions
• Equivalent to: OEM T10402, T10415
• Engines: 1.6L TDi CR diesel & 2.0L TDi
• Applications: Volkswagen Golf 2009, Seat Ibiza 2008, Altea 2009, Leon 2009, Altea XL 2009, Altea Freetrack 2009, Toledo 2013 and Audi A3 2009/2013
• Diesel injector remover for VAG vehicles fitted with 1.6 & 2.0 CR TDi engines

• Ideal for a wide variety of trades including automotive, electronics, computers, modelling etc.
• Small size makes it suitable for many fixings
• 40mm diameter magnet with magnetic power 1000-1200 GAUSS
• Manufactured from stainless steel with PVC base to prevent scratching
• Size: 64mm x 93mm x 14mm deep

General Information

Vibration Damper Pulley Puller - Ford 2.0 Ecoblue TDCi. Vibration Damper Pulley Puller - Ford 2.0 Ecoblue TDCi

• Performs the function of OEM 205-295 (puller), 204-158-01 (crankshaft nose protector spigot) for the applications listed only
• Application: Ford Transit, Transit Custom and Tourneo Custom Ecoblue TDCi, AWD, FWD, RWD 2016 onwards Engine codes: YLFS, YMFS, YNFS, YLF6, YMF6, YNR6, YMR6, YLR6, YNF6
• Removes the front pulley to gain access to the timing belt area

General Information

Engine Timing Kit Ford 2.0 EcoBlue Diesel. Engine Timing Kit Ford 2.0 EcoBlue Diesel

General Information

Hex Bit 11mm 1/2"D

• Socket manufactured from chrome vanadium
• Bit manufactured from silicon steel
• 1/2in. D x 55mm long
• Application: brake caliper bolts on Ford Focus/Edge plus Mercedes Benz/Volvo

General Information

Universal Trim/Trimclip Removal Tool. Universal Trim/Trimclip Removal Tool

• Non marking
• 4 x Sharp profiles for removing trim from most angles
• Manufactured from tough composite material
• Double ended hook and pry bar

General Information

Pulley Holding Tool Set - VAG

• Complete set of adaptors including 4.8mm, 6mm, square 15mm x 6mm, square 15mm x 12mm, cup 13mm x 17mm , cup 16mm x 20mm, Spline M10, M12
• Equivalent to OEM tools T10172A (T10172) and T10554
• Designed to hold camshaft, crankshaft, oil pump and water pump pulleys and sprockets while loosening and tightening the fixing bolts

• Contents include 5 x 1/4in. Drive UJ Sockets: E4, E5, E6, E7, E8 x 40mm long
• 4 x 3/8in. Drive: E10, E12, E14, E16 x 60mm long
• Manufactured from Chrome Molybdenum
• Fully polished finish
• Supplied in EVA foam with clear lid

General Information

Plastic Sump Plug Removal Tool PSA/Ford

General Information

EU Registered Design

General Information

Engine Timing Kit - Vauxhall/Opel 1.0/1.4 Petrol Engine Timing Kit - Vauxhall/Opel 1.0/1.4 Petrol.

• Made in Sheffield
• Year 2014-2017
• Equivalent to OEM EN-51367, EN-51298, EN-51632
• Engine codes: 1.0lt LE1/B10XFL,B10XFT, B10XHT AND 1.4LT LV7/B14XE, LE2/B14XHL, B14XHT
• Applications: Vauxhall/Opel Adam Astra-K, Corsa-E Turbo SIDI, EcoFlex, Turbo

General Information

Difficult Access Funnel

• Manufactured from PP Plastic
• Car and van applications include: Brake Master Cylinders on Ford Mondeo, Ford Transit, Vauxhall Insignia & Vauxhall Corsa
• Angled access - reach 240mm
• Funnel diameter 145mm x 135mm deep
• Cranked spout for easy access on dificult to reach filling points on brake master cylinders and motorcycle engine oil fillers

General Information

Budd Wheel Nut Socket 21mm Sq. Budd Wheel Nut Socket 21mm Sq

• Suitable for front and rear axle wheels on many imported trucks including Isuzu, Mitsubishi Fuso and Hino
• Impact quality manufactured from Chrome Molybdenum with black phosphate finish
• Extra deep design allows removal of stud and nut
• Length 90mm x 3/4in.D
• Budd wheel nut socket 21mm square (4pt)

General Information

Sharks Teeth Spanner Organiser - 35 Spanners

General Information

Sharks Teeth Spanner Organiser - 20 Spanners

• 420mm long (595mm version available - Part No 6976)
• Two individual strips for spanner length selection
• Holds 20 Spanners
• Manufactured from composite material with adhesive strips
• Ideal for organising tool cabinet drawers
• Sharks teeth spanner organiser takes 20 spanners 420mm long

General Information

Oil Filter Wrench Set 3/8"D 2pc

General Information

Cambelt Timing Tool Kit Ford 1.0GTDI Cambelt Timing Tool Kit Ford 1.0GTDI.

• Made in Sheffield
• Camshaft Locking blocks are EU Registered design
• Where the VCT pulleys require removing or setting the additional kit Part 6291 will be required

• Applications: Ford 1.0lt 3cyl Turbo charged EcoBoost engine from 2012<
• Equivalent to OEM 303-732, 303-1054, 303-1602, 303-1603, 303-1604, 303-1605/1, 303-1605/2
• GTDi engines found in Ford B-Max, C-Max, Fiesta, Focus, Grand C-Max, Transit Connect

General Information

Flameless Hot Air Blower. Flameless Hot Air Blower

• Net weight without gas 68 grams. Dimensions 110 x 27 x 85mm
• Fueled by 5.5ml butane gas which is available from newsagents and supermarkets (cigarette lighter gas)
• Includes heat shrinking tubes
• Run time approximately 20-25 minutes (at mid setting)
• Variable heat/temperature range up to 650 degrees C
• Features: Instant electronic ignition, refillable tank with see through window, stable catalytic heating system. Stable catalystic heating system

• Variable heat/temperature range up to 650 degrees C
• Run time approximately 20-25 minute
• Net weight without gas 68 grams
• Dimensions 110 x 27 x 85mm

General Information

Rear Swinging Arm Bush Tool - for Ford

• Designed and manufactured in Sheffield
• Force Screw replacement Part No: Laser 1319, Nut Assembly replacement - Laser 1803
• Supplied with Molybdenum Disulphide grease for extended force screw life
• Designed to be used on car with the minimal strip down reducing the time taken to replace worn bushes (Bush Nos: 1 535 296/1 805 815)
• Application Ford Fiesta MK VI 2008 onwards

• Bush Nos: 1 535 296/1 805 815