Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Right Front |
| Operating Mode | Manual |
| Paired article numbers | 183287 |
| Weight | 3.0 kg |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Operating Mode | Mechanical |
| Weight | 2.0 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Placement on Vehicle | Rear |
| Max. Length | 224 mm |
| Min. Length | 208 mm |
| Pipe Diameter | 40 mm |
| Mounting points diameter | 12 mm. 18 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Bolt Hole Circle Diameter | 64 mm |
| Inner diameter | 29 mm |
| Weight | 3.4 kg |
| Outer diameter | 136 mm |
| Width | 88 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Stroke | 196 mm |
| Eject Force | 985 N |
| Placement on Vehicle | both sides |
| Weight | 0.3 kg |
| Length | 711 mm |
| Housing Diameter | 22 mm |
| Housing length | 395.5 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 10 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Placement on Vehicle | Right Rear |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 339 mm |
| Min. Length | 242 mm |
| Piston conrod diameter | 12.5 mm |
| Function | Shock Absorber, driver cab suspension |
| Mounting points diameter | 12 mm |
| Pipe Diameter | 44.5 mm |
| Type | Shock Absorber, driver cab suspension |
| Weight | 2.7 kg |
| External Thread Size | M8 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Weight | 3.304 kg |
| Additional Information 2 | with screw |
| Parameter | 6PK |
| Inner diameter | 32 mm |
| Thickness | 83 mm |
| Number of Ribs | 5 |
| Function | Belt Pulley, crankshaft |
| Outer diameter | 160 mm |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (26825)
- 1x Febi Centering Bolt, crankshaft pulley (33557)
£70.09
Important compatibility info
| Weight | 2.410 kg |
| Placement on Vehicle | Rear Axle |
| Width | 42 mm |
| Outer diameter | 180 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Function | Brake Shoe Set |
| Piston Diameter | 20.6 mm |
| Type | Brake Shoe Set |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.09
Important compatibility info
| Weight | 2.32 kg |
| Piston Diameter | 19.1 mm |
| Placement on Vehicle | Rear Axle |
| Width | 32 mm |
| Outer diameter | 180 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Function | Brake Shoe Set |
| Type | Brake Shoe Set |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.09
Important compatibility info
| Weight | 2.05 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 145 mm. 49 mm |
| Number of Holes | 6 |
| Number of Teeth | 30 |
| Type | Wheel Hub |
| Function | Wheel Hub |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.09
Important compatibility info
| Weight | 1.391 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Paired article numbers | 170569 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.12
Important compatibility info
| Weight | 0.396 kg |
| Placement on Vehicle | Right, Centre |
| Type | Roller Guide, sliding door |
| Function | Roller Guide, sliding door |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.13
Important compatibility info
| Weight | 0.33 kg |
| Length | 136 mm |
| Additional Information 2 | with switch |
| Function | Gear Lever Knob |
| Type | Gear Lever Knob |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.16
Important compatibility info
| Weight | 1.250 kg |
| Paired article numbers | 34287 |
| Cone Size | 12.5 mm |
| Placement on Vehicle | Upper Front Axle, Right |
| Steering arm type | Triangular Control Arm (CV) |
| Material | Aluminium |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts, with lock nut |
| Cone Size 2 | 14.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.17
Important compatibility info
| Outer diameter | 74 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Weight | 1.500 kg |
| Width of castor bearing surface | 46 mm |
| for OE number | 5 0404 6191 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.17
Important compatibility info
| Weight | 1.251 kg |
| Paired article numbers | 34286 |
| Additional Information | with lock nut, with rubber mounts |
| Placement on Vehicle | Upper Front Axle, Left |
| Steering arm type | Triangular Control Arm (CV) |
| Cone Size | 12.5 mm |
| Material | Aluminium |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Cone Size 2 | 14.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.17
Important compatibility info
| Function | Oil Pump |
| Type | Oil Pump |
| for OE number | 1001.G8 |
| Weight | 1.617 kg |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.18
Important compatibility info
| Additional Information | with gasket/seal |
| Material | Grey Cast Iron |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Weight | 0.858 kg |
| for OE number | 25100-2E000 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.18
Important compatibility info
| Type | Drive Shaft |
| Function | Drive Shaft |
| Weight | 10.596 kg |
| External Teeth, Wheel Side | 31 |
| Paired article numbers | 182815 |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M24 x 1,5 |
| Transmission-side joint diameter | 88.9 mm |
| Wheel Sided Joint Diameter | 98 mm |
| External Teeth, Diff.Side | 39 |
| Min. Length | 1072 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.19
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.080 kg |
| Cable Length | 346 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated, Regulating Sensor |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.21
Important compatibility info
| Brake caliper piston diameter | 38 mm |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 181559 |
| Weight | 1.375 kg |
| Material | Cast Aluminium |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.22
Important compatibility info
| Weight | 1.305 kg |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Inner length 1 | 975 mm |
| Inner length 2 | 1000 mm |
| Outer length 1 | 1265 mm |
| Outer length 2 | 1323 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.23
Important compatibility info
| Weight | 9.320 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 296 mm |
| Thickness | 51.5 mm |
| Brake Disc Thickness | 32 mm |
| Minimum thickness | 30 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62.1 mm |
| Surface | Coated |
| Number of mounting bores | 12 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.23
Important compatibility info
| Placement on Vehicle | Left |
| Weight | 1.647 kg |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.23
Important compatibility info
| Weight | 8.900 kg |
| Rotor Style | perforated/vented |
| Minimum thickness | 26 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 312 mm |
| Thickness | 76 mm |
| Brake Disc Thickness | 28 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.23
Important compatibility info
| Weight | 1.200 kg |
| Function | Mounting, engine |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| for OE number | 5WA 199 262 D |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.25
Important compatibility info
| Weight | 1.64 kg |
| Placement on Vehicle | Left Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.26
Important compatibility info
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
| Cable Length | 225 mm |
| Weight | 0.040 kg |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.27
Important compatibility info
| Thread Size | M20x1,5 |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Left |
| External Teeth, Wheel Side | 23 |
| Weight | 5.074 kg |
| External Teeth, Diff.Side | 25 |
| Min. Length | 650 mm |
| Wheel Sided Joint Diameter | 79 mm |
| Transmission-side joint diameter | 74.2 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.28
Important compatibility info
| Additional Information | with rubber mounts |
| Weight | 1.16 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Camber correction | -0.5 ° |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.28
Important compatibility info
| Weight | 3.35 kg |
| Placement on Vehicle | Front Axle Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 32071 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.29
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023