Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Brake Caliper |
| Brake caliper piston diameter | 57 mm |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178242 |
| Weight | 3.1 kg |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.13
Important compatibility info
| Weight | 0.048 kg |
| Material | Plastic |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Placement on Vehicle | Centre |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.89
Important compatibility info
| Type | Flange Lid, automatic transmission |
| Weight | 0.08 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | NBR (nitrile butadiene rubber) |
| Outer diameter | 40 mm |
| Thickness | 6 mm |
| Function | Flange Lid, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.64
Important compatibility info
| Weight | 4.178 kg |
| Type | Compressor, compressed-air system |
| Function | Compressor, compressed-air system |
| Extra Description | febi Plus |
| for OE number | 4E0 616 005 D |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£278.69
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Weight | 0.05 kg |
| Type | Sensor, wheel speed |
| Cable Length | 625 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.66
Important compatibility info
| Additional Information | with control unit |
| Weight | 8.4 kg |
| Recommended additional repairs | Repair kit |
| Charge Type | Exhaust Turbocharger |
| Type | Charger, charging (supercharged/turbocharged) |
| Additionally required parts | Mounting Kit, motor-specific oil supply lines (feed/return) |
| Function | Charger, charging (supercharged/turbocharged) |
| Extra Description | BorgWarner Turbo REMAN |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£765.69
Important compatibility info
| Rotor Style | Solid |
| Weight | 5.24 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 273 mm |
| Thickness | 63.4 mm |
| Brake Disc Thickness | 12.7 mm |
| Minimum thickness | 10.6 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 80 mm |
| Surface | Coated |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.92
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Duplex, with chain lock |
| Number of Chain Links | 98 |
| Weight | 0.741 kg |
| Timing Chain Size | D67ZN |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£67.07
Important compatibility info
| Length | 90 mm |
| Material | Rubber/Metal |
| Outer diameter | 56 mm |
| Inner diameter | 12 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 0.63 kg |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.15
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Weight | 0.239 kg |
| Material | Plastic |
| Outer diameter | 70 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information | with holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.74
Important compatibility info
| External Thread Size | M33 x 3,5 |
| Type | Repair Kit, kingpin |
| Function | Repair Kit, kingpin |
| Length | 265 mm |
| Placement on Vehicle | Front Axle |
| Weight | 5.534 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (104470)
- 1x Febi Bush, kingpin (104182)
- 1x Febi Nut (107297)
- 1x Febi Spacer, kingpin (107308)
- 1x Febi Spacer, kingpin (107309)
- 1x Febi Spacer, kingpin (107310)
- 1x Febi Spacer, kingpin (107311)
- 1x Febi Spacer, kingpin (107314)
- 1x Febi Bush, steering knuckle (107270)
- 1x Febi Seal Ring, steering knuckle (170501)
- 1x Febi Bush, steering knuckle (170502)
- 1x Febi Seal Ring, steering knuckle (170574)
- 1x Febi Pressure Piece, kingpin (171958)
- 1x Febi Pressure Piece, kingpin (172736)
£123.53
Important compatibility info
| Weight | 3.780 kg |
| Placement on Vehicle | Rear Axle |
| Width | 59 mm |
| Outer diameter | 74 mm |
| Inner diameter | 30 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.15
Important compatibility info
| Weight | 22.8 kg |
| Type | Compressor, compressed-air system |
| Function | Compressor, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£540.91
Important compatibility info
| Weight | 0.17 kg |
| Placement on Vehicle | Front Axle |
| Function | Protective Cap/Bellow, shock absorber |
| Type | Protective Cap/Bellow, shock absorber |
| Replaces | 13066 |
| Additional Information | with bump stop |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.17
Important compatibility info
| Weight | 0.085 kg |
| Spanner Size | 22 |
| Cable Length | 300 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.80
Important compatibility info
| Function | Wheel Brake Cylinder |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Piston Diameter | 15.9 mm |
| Weight | 0.26 kg |
| Material | Grey Cast Iron |
| Internal Thread Size | M6 x 1, M10 x 1 |
| Type | Wheel Brake Cylinder |
| Additional Information | with pressure pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Function | EGR valve, exhaust control |
| Type | EGR valve, exhaust control |
| Valve type | Solenoid Valve |
| Weight | 0.57 kg |
| Operating Mode | Electric-pneumatic |
| for OE number | 51.25902.0123 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£322.24
Important compatibility info
| Outer diameter | 38 mm |
| Additional Information | with counter nut |
| Length | 183 mm |
| External Thread Size | M14 x 1,5, M20 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 0.486 kg |
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
| Spanner Size | 32 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.49
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 197161 |
| Weight | 0.377 kg |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.77
Important compatibility info
| Type | Air Filter |
| Function | Air Filter |
| Weight | 0.383 kg |
| Height | 252 mm |
| Outer diameter | 113 mm |
| Inner diameter | 64 mm |
| Filter type | Filter Insert |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.60
Important compatibility info
| Brake System | ATE |
| Function | Accessory Kit, disc brake pad |
| Type | Accessory Kit, disc brake pad |
| Weight | 0.068 kg |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.29
Important compatibility info
| Weight | 0.07 kg |
| Number of switch stages | 3 |
| Function | Blower Switch, heating/ventilation |
| Control Type | Rotary Operation |
| Number of Connectors / Ports | 5 |
| Colour | Black |
| Material | Plastic |
| Type | Blower Switch, heating/ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.91
Important compatibility info
| Weight | 0.25 kg |
| Placement on Vehicle | Front Axle, Wheel Side |
| Length | 113 mm |
| Material | Thermoplast |
| Inner diameter 1 | 25 mm |
| Inner diameter 2 | 88 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (15840)
- 1x Febi Clamping Clip (45644)
- 1x Febi Clamping Clip (38758)
- 1x Febi Screw (05919)
- 1x Febi Circlip (03185)
- 1x Febi Spring Washer (07254)
- 1x Febi Molybdenum Grease (02582)
£15.64
Important compatibility info
| Weight | 1.2 kg |
| Placement on Vehicle | Front Axle |
| Length | 104.4 mm |
| Width | 66.5 mm |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19.5 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.44
Important compatibility info
| Weight | 1.424 kg |
| Placement on Vehicle | Rear Axle |
| Length | 140.7 mm. 141.2 mm |
| Width | 53.6 mm. 50.7 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18.8 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.29
Important compatibility info
| Placement on Vehicle | Front Axle, Wheel Side |
| External Thread Size | M24 x 1,5 |
| External Teeth, Wheel Side | 29 |
| Type | Joint Kit, drive shaft |
| Weight | 3.180 kg |
| Seal Diameter | 56 mm |
| Internal Teeth, wheel side | 36 |
| Length | 174 mm |
| Function | Joint Kit, drive shaft |
| Outer diameter | 102 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.47
Important compatibility info
| Function | Master Cylinder, clutch |
| Additional Information | with gasket/seal |
| Bore Diameter | 16 mm |
| Fill Medium | Brake Fluid |
| Driver Position | for right-hand drive vehicles |
| Type | Master Cylinder, clutch |
| Weight | 0.264 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.68
Important compatibility info
| Function | Oil Jet, piston underside cooling |
| Type | Oil Jet, piston underside cooling |
| Weight | 0.025 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.19
Important compatibility info
| Weight | 0.040 kg |
| Material | Rubber |
| Inner diameter | 18 mm |
| Placement on Vehicle | Front Axle, outer |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.66
Important compatibility info
| Weight | 0.320 kg |
| Additional Information 2 | with bolts/screws |
| Placement on Vehicle | Front Axle |
| Additional Information | with holder |
| Inner diameter | 19 mm |
| Function | Mounting Kit, stabiliser bar |
| Type | Mounting Kit, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, stabiliser bar (21855)
- 2x Febi Bracket, stabiliser mounting (27355)
- 4x Febi Screw (24362)
£10.80
Important compatibility info
| Weight | 0.27 kg |
| Steering arm type | for control arm |
| Additional Information 2 | with retaining ring |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Ball Joint |
| Cone Size | 16.5 mm |
| Type | Ball Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.03
Important compatibility info
| Weight | 0.41 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.15
Important compatibility info
| Placement on Vehicle | Right Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Weight | 0.72 kg |
| Type | Mounting, engine |
| for OE number | 06 84 234 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.40
Important compatibility info
| Function | Brake Hose |
| Placement on Vehicle | Front Axle Right |
| Length | 625 mm |
| Paired article numbers | 183698 |
| Weight | 0.125 kg |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Weight | 5.22 kg |
| Rotor Style | Solid |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 290 mm |
| Thickness | 60 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 71 mm |
| Surface | Coated |
| Number of mounting bores | 3 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.78
Important compatibility info
| Weight | 0.09 kg |
| Function | Filter, cabin air |
| Type | Filter, cabin air |
| Width | 199 mm |
| Length | 222 mm |
| Filter type | Pollen Filter |
| Height | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.85
Important compatibility info
| Surface | Primed |
| Width | 165 mm |
| Material | Sheet Steel |
| Type | Holder, Wheel Chock |
| Function | Holder, Wheel Chock |
| Weight | 1.051 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.50
Important compatibility info
| Weight | 0.2 kg |
| Outer diameter | 60 mm |
| Function | Tensioner Pulley, timing belt |
| Width of castor bearing surface | 32.5 mm |
| Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.80
Important compatibility info
| Weight | 0.460 kg |
| Length | 112 mm |
| Width | 84 mm |
| Material | Rubber/Metal |
| Thickness | 16 mm |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.09
Important compatibility info
| Placement on Vehicle | Front Axle Left, transmission sided, Front Axle Right |
| Material | Rubber |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 65 mm |
| Inner diameter 1 | 25 mm |
| Length | 100 mm |
| Weight | 0.410 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (27077)
- 1x Febi Clamping Clip (45634)
- 1x Febi Clamping Clip (38758)
- 1x Febi Molybdenum Grease (02582)
- 2x Febi Circlip (29202)
- 1x Febi Circlip (03591)
£17.63
Important compatibility info
| Weight | 0.303 kg |
| Placement on Vehicle | both sides |
| Length | 512 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 270 mm |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 18 mm |
| Stroke | 178 mm |
| Eject Force | 550 N |
| Housing Diameter | 19 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Weight | 1.512 kg |
| Placement on Vehicle | Front Axle |
| Length | 150.1 mm. 151.5 mm |
| Width | 52.5 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.7 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.45
Important compatibility info
| Weight | 1.96 kg |
| Length | 148.3 mm |
| Width | 70 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19.3 mm |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
| Placement on Vehicle | Front Axle |
| Type | Brake Pad Set, disc brake |
| Manufacturer | BMW |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.54
Important compatibility info
| Weight | 0.11 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 386 mm |
| Outer diameter | 10 mm |
| Inner diameter | 3 mm |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.01
Important compatibility info
| Weight | 5.78 kg |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 853 mm |
| Min. Length | 515 mm |
| Pipe Diameter | 76 mm. 63.5 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£142.05
Important compatibility info
| Length | 1698 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
| Weight | 0.173 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.80
Important compatibility info
| Function | Compressor, air conditioning |
| Belt Pulley Diameter | 110 mm |
| Oil Fill Quantity | 220 ml |
| Weight | 6.8 kg |
| Number of grooves | 4 |
| Type | Compressor, air conditioning |
| Voltage | 24 V |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£283.63
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| Weight | 0.67 kg |
| Placement on Vehicle | Front Axle Right |
| Length | 213 mm |
| Paired article numbers | 29623 |
| Surface | Zinc-coated |
| Function | Tie Rod End |
| Additional Information | with counter nut |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.72
Important compatibility info
| Material | Grey Cast Iron |
| Number of Wings | 9 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Weight | 9.270 kg |
| Type | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.58
Important compatibility info
| Placement on Vehicle | Rear |
| Material | Rubber/Metal |
| for OE number | 20 65 163 64R |
| Type | Mount, exhaust system |
| Function | Mount, exhaust system |
| Weight | 0.200 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.65
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023