Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
Thread Size | M20X1,5 |
Seal Diameter | 63 mm |
Additional Information 2 | with groove |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Internal Teeth, wheel side | 30 |
External Teeth, Wheel Side | 38 |
Length | 170 mm |
Important compatibility info
Number of Rivet Holes | 4 |
Thread Measurement 1 | M16x1.5 |
Bore Diameter 1 | 17.5 mm |
Function | Ball Joint |
Number of mounting bores | 5 |
Mounting Type | Bolted |
Additional Information 2 | without bolts/screws |
Type | Ball Joint |
Steering arm type | for control arm |
Bore Diameter 2 | 20 mm |
Important compatibility info
Number of pads | 4 |
Wear Warning Contact | prepared for wear warning indicator |
Function | Brake Pad Set, disc brake |
Number of Springs | 4 |
Thickness/Strength 1 | 18.2 mm |
Brake System | Ate - Teves |
Type | Brake Pad Set, disc brake |
Height 1 | 84.7 mm |
Width 1 | 219.2 mm |
Placement on Vehicle | Front Axle |
Important compatibility info
Rotor Style | Vented |
Number of Holes | 5 |
Outer diameter | 275 mm |
Brake Disc Thickness | 28 mm |
Height | 49.2 mm |
Minimum thickness | 26 mm |
Centering Diameter | 55 mm |
Function | Brake Disc |
Quantity Unit | Set |
Placement on Vehicle | Front Axle |
Type | Brake Disc Rotor |
Surface | Coated |
Number of mounting bores | 2 |
Important compatibility info
Material | Steel |
Function | Oil sump |
Type | Oil sump |
Important compatibility info
Type | Joint Kit, drive shaft |
Length | 88 mm |
Function | Joint Kit, drive shaft |
Int. teeth, diff.side, conn.to transm. | 34 |
Placement on Vehicle | Front Axle Left, Front Axle Right, transmission sided |
Important compatibility info
Number of Teeth | 124 |
Type | Water Pump & Timing Belt Kit |
Function | Water Pump & Timing Belt Kit |
Important compatibility info
Outer diameter | 72 mm |
Steering arm type | for triangular control arm (CV) |
Type | Repair Kit, control/trailing arm |
Function | Repair Kit, control/trailing arm |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6794 |
Placement on Vehicle | Front Axle Left, Lower |
Important compatibility info
Placement on Vehicle | Front Axle |
Rotor Style | Vented |
Brake Disc Thickness | 19 mm |
Outer diameter | 241 mm |
Number of Holes | 4 |
Height | 52 mm |
Minimum thickness | 17 mm |
Centering Diameter | 63 mm |
Function | Brake Disc |
Quantity Unit | Set |
Surface | Coated |
Type | Brake Disc Rotor |
Number of mounting bores | 2 |
Important compatibility info
Rotor Style | Vented |
Surface | Coated |
Brake Disc Thickness | 22 mm |
Number of Holes | 5 |
Height | 37.6 mm |
Outer diameter | 287 mm |
Function | Brake Disc |
Quantity Unit | Set |
Centering Diameter | 66.5 mm |
Minimum thickness | 21 mm |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Number of mounting bores | 2 |
Important compatibility info
Replaces | BWK1210 |
Function | Wheel Bearing Kit |
Width 1 | 85 mm |
Outer diameter 1 | 145 mm |
Bearing Code | Gen 3 |
Type | Wheel Bearing Kit |
Placement on Vehicle | Front Axle |
Important compatibility info
Surface | Coated |
Number of Holes | 5 |
Outer diameter | 273 mm |
Brake Disc Thickness | 10 mm |
Height | 67.5 mm |
Rotor Style | Solid |
Minimum thickness | 8.5 mm |
Centering Diameter | 58 mm |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Placement on Vehicle | Rear Axle |
Number of mounting bores | 2 |
Important compatibility info
Outer diameter | 330 mm |
Rotor Style | Vented |
Brake Disc Thickness | 32 mm |
Height | 55 mm |
Number of Holes | 5 |
Function | Brake Disc |
Centering Diameter | 72 mm |
Minimum thickness | 29.5 mm |
Type | Brake Disc Rotor |
Quantity | 1 |
Placement on Vehicle | Front Axle |
Important compatibility info
Rotor Style | Vented |
Outer diameter | 290 mm |
Function | Brake Disc |
Quantity Unit | Set |
Centering Diameter | 58 mm |
Minimum thickness | 16.0 mm |
Number of Holes | 5 |
Brake Disc Thickness | 18 mm |
Height | 64 mm |
Surface | Coated |
Type | Brake Disc Rotor |
Placement on Vehicle | Rear Axle |
Number of mounting bores | 3 |
Important compatibility info
Material | ACM (Polyacrylate) |
Inner diameter 1 | 58 mm |
Colour | Black |
Inner diameter 2 | 58 mm |
Port / Connector type | OE PUSH CONNECTOR |
Function | Charge Air Hose |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1108S)
Important compatibility info
Inner diameter 2 | 52 mm |
Colour | Black |
Inner diameter 1 | 52 mm |
Material | ACM (Polyacrylate) |
Port / Connector type | OE PUSH CONNECTOR |
Function | Charge Air Hose |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC2002S)
Important compatibility info
Type | Joint Kit, drive shaft |
Placement on Vehicle | Front Axle Left, Wheel Side |
Function | Joint Kit, drive shaft |
Important compatibility info
Technical Information Number | Middle groove |
Length | 143 mm |
Function | Joint Kit, drive shaft |
Internal Teeth, wheel side | 20 |
Thread Size | M18X1,5 |
Type | Joint Kit, drive shaft |
Seal Diameter | 49 mm |
External Teeth, Wheel Side | 25 |
Additional Information 2 | with groove |
Important compatibility info
Type | Joint Kit, drive shaft |
Length | 149 mm |
Seal Diameter | 56.7 mm |
External Teeth, Wheel Side | 27 |
Transmission Type | 6-Speed Manual Transmission |
Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
Function | Joint Kit, drive shaft |
Internal Teeth, wheel side | 33 |
Thread Size | M18X1,5 |
Additional Information 2 | with groove |
Important compatibility info
Int. teeth, diff.side, conn.to transm. | 28 |
Function | Joint Kit, drive shaft |
Length | 139 mm |
Type | Joint Kit, drive shaft |
Seal Diameter | 65 mm |
External Teeth, Diff.Side | 30 |
Important compatibility info
Number of Parts | 2 -part |
Hub Profile | 20.4 x 18.2 |
Outer diameter | 190 mm |
Function | Clutch Kit |
Type | Clutch Kit |
Number of Teeth | 24 |
Important compatibility info
Rotor Style | Solid |
Function | Brake Disc |
Type | Brake Disc Rotor |
Quantity Unit | Set |
Outer diameter | 300 mm |
Brake Disc Thickness | 10 mm |
Height | 32 mm |
Placement on Vehicle | Rear Axle |
Surface | Coated |
Centering Diameter | 76 mm |
Minimum thickness | 8 mm |
Number of Holes | 5 |
Number of mounting bores | 2 |
Important compatibility info
Bearing Code | Gen 3 |
Additional Information 2 | with integrated ABS sensor |
Inner diameter 1 | 40 mm |
Outer diameter 1 | 79 mm |
Only in connection with | BHN211, FHN211 |
Width 1 | 62 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Placement on Vehicle | Front Axle |
Important compatibility info
Additional Information 2 | with integrated ABS sensor |
Inner diameter 1 | 40 mm |
Outer diameter 1 | 84 mm |
Width 1 | 40 mm |
Tightening Torque | 280 Nm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Placement on Vehicle | Front Axle |
Bearing Code | Gen 1 |
Important compatibility info
Rotor Style | Vented |
Outer diameter | 258 mm |
Quantity Unit | Set |
Brake Disc Thickness | 22 mm |
Height | 43.9 mm |
Number of Holes | 4 |
Minimum thickness | 19.8 mm |
Centering Diameter | 61 mm |
Function | Brake Disc |
Surface | Coated |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Number of mounting bores | 2 |
Important compatibility info
Length | 170 mm |
Thread Size | M24X1,5 |
External Teeth, Wheel Side | 29 |
Seal Diameter | 62 mm |
Internal Teeth, wheel side | 28 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Important compatibility info
Inner diameter 1 | 49 mm |
Inner diameter 2 | 49 mm |
Material | Polychloroprene (Neoprene) |
Colour | Black |
Function | Charge Air Hose |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1106S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1107S)
Important compatibility info
Rotor Style | Solid |
Number of Holes | 5 |
Outer diameter | 284 mm |
Minimum thickness | 8.5 mm |
Centering Diameter | 76 mm |
Brake Disc Thickness | 10 mm |
Height | 54.3 mm |
Function | Brake Disc |
Quantity Unit | Set |
Surface | Coated |
Type | Brake Disc Rotor |
Placement on Vehicle | Rear Axle |
Number of mounting bores | 3 |
Important compatibility info
Bearing Code | Gen 3 |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Outer diameter 1 | 138 mm |
Width 1 | 77 mm |
Outer diameter 2 | 84 mm |
Placement on Vehicle | Front Axle |
Important compatibility info
Placement on Vehicle | Rear Axle Left |
Bearing Code | Gen 2 |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Important compatibility info
Number of Teeth | 14 |
Hub Profile | 18.3 x 15.7 |
Outer diameter | 200 mm |
Function | Clutch Kit |
Number of Parts | 2 -part |
Type | Clutch Kit |
Important compatibility info
Function | Wiper Motor |
Placement on Vehicle | Front |
Type | Wiper Motor |
Voltage | 12 V |
Additional Information | without rod assembly |
Important compatibility info
Paired article numbers | FCA7947 |
Diameter | 20 mm |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK8179)
- 1x Borg & Beck Mounting, control/trailing arm (BSK8180)
- 1x Borg & Beck Ball Joint (BBJ5776)
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7948 |
Diameter | 20 mm |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK8179)
- 1x Borg & Beck Mounting, control/trailing arm (BSK8180)
- 1x Borg & Beck Ball Joint (BBJ5776)
Important compatibility info
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
Material | Polychloroprene (Neoprene) |
Internal Teeth, wheel side | 28 |
Thread Size | M24X2 |
External Teeth, Wheel Side | 31 |
Length | 158 mm |
Seal Diameter | 68.2 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Wheel Side |
Additional Information 2 | with groove |
Important compatibility info
Number of Parts | 3 -part |
Hub Profile | 17.3 x 15.2 |
Outer diameter | 190 mm |
Function | Clutch Kit |
Type | Clutch Kit |
Number of Teeth | 20 |
Important compatibility info
Placement on Vehicle | Front Axle |
Function | Brake Disc |
Centering Diameter | 55 mm |
Minimum thickness | 20.0 mm |
Number of Holes | 4 |
Rotor Style | Vented |
Height | 43.9 mm |
Type | Brake Disc Rotor |
Outer diameter | 258 mm |
Brake Disc Thickness | 22 mm |
Quantity Unit | Set |
Surface | Coated |
Number of mounting bores | 1 |
Important compatibility info
Rotor Style | Solid |
Number of Holes | 5 |
Outer diameter | 302 mm |
Brake Disc Thickness | 11 mm |
Height | 41 mm |
Minimum thickness | 9 mm |
Centering Diameter | 63.5 mm |
Function | Brake Disc |
Quantity Unit | Set |
Surface | Coated |
Type | Brake Disc Rotor |
Placement on Vehicle | Rear Axle |
Number of mounting bores | 1 |
Important compatibility info
Placement on Vehicle | Centre right |
Function | Radiator Hose |
Type | Radiator Hose |
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information 2 | with integrated ABS sensor |
Thread Size | M12x1.5 |
Outer diameter 1 | 139 mm |
Number of Teeth, ABS ring | 92 |
Width 1 | 38 mm |
Outer diameter 2 | 88 mm |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Bearing Code | Gen 3 |
Important compatibility info
Type | Centre Rod Assembly |
Thread Measurement 2 | M30X1.5 |
Length | 978 mm |
Function | Centre Rod Assembly |
Pipe Diameter | 30 mm |
Rod/Strut | Push Rod |
Thread Measurement 1 | M20X1.5 |
Important compatibility info
Rotor Style | Vented |
Surface | Coated |
Outer diameter | 300 mm |
Minimum thickness | 19.4 mm |
Centering Diameter | 67 mm |
Brake Disc Thickness | 22 mm |
Height | 65.6 mm |
Function | Brake Disc |
Quantity Unit | Set |
Number of Holes | 5 |
Type | Brake Disc Rotor |
Placement on Vehicle | Rear Axle |
Number of mounting bores | 1 |
Important compatibility info
Function | Joint Kit, drive shaft |
Int. teeth, diff.side, conn.to transm. | 20 |
Length | 121 mm |
Type | Joint Kit, drive shaft |
External Teeth, Diff.Side | 25 |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, transmission sided |
Seal Diameter | 35 mm |
Important compatibility info
Inner diameter 1 | 68 mm |
Colour | Black |
Inner diameter 2 | 68 mm |
Material | Polychloroprene (Neoprene) |
Function | Charge Air Hose |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1004S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1108S)
Important compatibility info
Surface | Coated |
Rotor Style | Vented |
Number of Holes | 5 |
Outer diameter | 276 mm |
Brake Disc Thickness | 22 mm |
Height | 44.7 mm |
Minimum thickness | 19 mm |
Centering Diameter | 67 mm |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Number of mounting bores | 1 |
Important compatibility info
Housing Type | with housing |
Type | Thermostat, coolant |
Housing material | Plastic |
Function | Thermostat, coolant |
Important compatibility info
Surface | Coated |
Height | 49.2 mm |
Brake Disc Thickness | 12 mm |
Rotor Style | Solid |
Number of Holes | 9 |
Outer diameter | 302 mm |
Minimum thickness | 10 mm |
Centering Diameter | 68 mm |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Placement on Vehicle | Rear Axle |
Number of mounting bores | 1 |
Important compatibility info
Height | 62.5 mm |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Number of Inlets / Outlets | 1 |
Water Pump Type | for v-ribbed belt use |
Type | Water Pump, engine cooling |
Number of Ribs | 5 |
Impeller Diameter | 72 mm |
Water Pump Pulley Diameter | 105 mm |
Important compatibility info
Inner diameter 1 | 57 mm |
Inner diameter 2 | 55 mm |
Colour | Black |
Port / Connector type | OE PUSH CONNECTOR |
Function | Charge Air Hose |
Material | AEM (Ethylene Acrylate Rubber) |
Placement on Vehicle | Left, Lower, Front |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1004S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1108S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC2005S)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023