Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Rear |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6928 |
Important compatibility info
| Function | Cable Pull, manual transmission |
| Length 1 | 976 mm |
| Length 4 | 670 mm |
| Length 3 | 700 mm |
| Length 2 | 938 mm |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Function | Cable Pull, manual transmission |
| Length 1 | 1068 mm |
| Length 4 | 700 mm |
| Length 3 | 726 mm |
| Length 2 | 1002 mm |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Function | Cable Pull, manual transmission |
| Length 1 | 961 mm |
| Length 4 | 1234 mm |
| Length 3 | 1291 mm |
| Length 2 | 941 mm |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Length 2 | 758 mm |
| Length 3 | 1113 mm |
| Length 4 | 1063 mm |
| Length 1 | 800 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Number of Teeth, ABS ring | 48 |
| External Teeth, Wheel Side | 28 |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 36 |
| Transmission Type | Manual Transmission |
| Length | 796 mm |
| Type | Drive Shaft |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1260)
Important compatibility info
| Function | Drive Shaft |
| Number of Teeth, ABS ring | 29 |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| External Teeth, Diff.Side | 34 |
| External Teeth, Wheel Side | 33 |
| Length | 612 mm |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1234)
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Length | 920 mm |
| External Teeth, Wheel Side | 25 |
| External Teeth, Diff.Side | 22 |
Important compatibility info
| External Teeth, Diff.Side | 26 |
| Type | Drive Shaft |
| External Teeth, Wheel Side | 25 |
| Length | 669 mm |
| Placement on Vehicle | Front Axle Left |
| Function | Drive Shaft |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Upper |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | FCA8146 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Placement on Vehicle | Front Axle Right, Upper |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | FCA8145 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front |
| Length | 382 mm |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Thread Measurement 1 | M16X1.5 |
| Paired article numbers | FCA8182 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Brake Disc |
| Quantity Unit | Set |
| Centering Diameter | 58 mm |
| Minimum thickness | 16.0 mm |
| Outer diameter | 320 mm |
| Height | 65.8 mm |
| Number of Holes | 5 |
| Surface | Coated |
| Rotor Style | Vented |
| Inspection Tag | ECE R90 Homologated |
| Type | Brake Disc Rotor |
| Brake Disc Thickness | 18 mm |
| Number of mounting bores | 3 |
Important compatibility info
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle |
| Function | Wheel Bearing Kit |
| Width 1 | 110 mm |
| Outer diameter 1 | 130 mm |
| Bearing Code | Gen 3 |
Important compatibility info
| Placement on Vehicle | Lower Right |
| Length | 157 mm |
| Inner diameter | 10 mm |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6544 |
Important compatibility info
| External Teeth, Wheel Side | 35 |
| Length | 808 mm |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 41 |
| Transmission Type | Manual Transmission |
| Placement on Vehicle | Front Axle Left |
| Function | Drive Shaft |
Important compatibility info
| Function | Brake Hose |
| Type | Brake Hose |
| Length | 150 mm |
| Thread Type | with external thread |
| Thread Size | M10x1 |
| Placement on Vehicle | Rear Axle, Right, outer |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Rotor Style | Vented |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Surface | Coated |
| Centering Diameter | 75 mm |
| Minimum thickness | 28.4 mm |
| Number of Holes | 5 |
| Brake Disc Thickness | 30 mm |
| Outer diameter | 348 mm |
| Height | 73 mm |
| Placement on Vehicle | Front Axle Left |
| Number of mounting bores | 1 |
Important compatibility info
| Number of Parts | 3 -part |
| Hub Profile | 20.7 x 18.4 |
| Outer diameter | 215 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Teeth | 24 |
Important compatibility info
| Function | Brake Disc |
| Centering Diameter | 69 mm |
| Minimum thickness | 16.4 mm |
| Outer diameter | 314 mm |
| Number of Holes | 5 |
| Rotor Style | Vented |
| Brake Disc Thickness | 18 mm |
| Height | 71.4 mm |
| Type | Brake Disc Rotor |
| Inspection Tag | ECE R90 Homologated |
| Quantity Unit | Set |
| Surface | Coated |
| Placement on Vehicle | Rear Axle |
| Number of mounting bores | 2 |
Important compatibility info
| Number of Teeth | 20 |
| Number of Parts | 3 -part |
| Hub Profile | 22.8 x 20.1 |
| Outer diameter | 229 mm |
| Engine Version | for engines with dual-mass flywheel |
| Function | Clutch Kit |
| Type | Clutch Kit |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 278 mm |
| Function | Brake Disc |
| Centering Diameter | 58 mm |
| Number of Holes | 5 |
| Rotor Style | Vented |
| Brake Disc Thickness | 18 mm |
| Height | 63 mm |
| Type | Brake Disc Rotor |
| Quantity Unit | Set |
| Surface | Coated |
| Number of mounting bores | 3 |
Important compatibility info
| Number of Parts | 3 -part |
| Hub Profile | 27.7 x 24.1 |
| Outer diameter | 225 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Teeth | 20 |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Material | Aluminium |
| Placement on Vehicle | Front Axle Right, Lower, Rear |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7557 |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5703)
- 1x Borg & Beck Mounting, control/trailing arm (BSK7880)
- 1x Borg & Beck Mounting, control/trailing arm (BSK7972)
Important compatibility info
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Aluminium |
| Placement on Vehicle | Front Axle Left, Lower, Rear |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7558 |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5703)
- 1x Borg & Beck Mounting, control/trailing arm (BSK7880)
- 1x Borg & Beck Mounting, control/trailing arm (BSK7972)
Important compatibility info
| Thread Measurement 1 | M24X1.5 |
| Length | 860 mm |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Rod/Strut | Push Rod |
| Pipe Diameter | 43 mm |
| Thread Measurement 2 | M30X.1.5 |
Important compatibility info
Important compatibility info
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Rod/Strut | Push Rod |
| Length | 822 mm |
Important compatibility info
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Length | 833 mm |
| Rod/Strut | Push Rod |
Important compatibility info
| Length | 959 mm |
| Function | Tie Rod |
| Type | Tie Rod |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7940 |
| Length | 272 mm |
| Diameter | 21 mm |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right, Upper |
Important compatibility info
| Surface | Coated |
| Brake Disc Thickness | 26 mm |
| Number of Holes | 5 |
| Outer diameter | 320 mm |
| Height | 49.2 mm |
| Rotor Style | Vented |
| Minimum thickness | 24 mm |
| Centering Diameter | 62 mm |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Inspection Tag | ECE R90 Homologated |
| Placement on Vehicle | Front Axle |
| Quantity | 1 |
| Number of mounting bores | 2 |
Important compatibility info
| Additional Information | without gaskets/seals |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Opening Temperature | 97 °C |
| Additional Information 2 | with sensor |
| Diameter | 24.5 mm |
| Housing Type | with housing |
Important compatibility info
| Hub Profile | 20.4 x 18.2 |
| Outer diameter | 200 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Teeth | 24 |
Important compatibility info
| Number of Parts | 3 -part |
| Hub Profile | 20.9 x 18.2 |
| Outer diameter | 200 mm |
| Function | Clutch Kit |
| Number of Teeth | 18 |
| Type | Clutch Kit |
Important compatibility info
| Outer diameter | 320 mm |
| Function | Brake Disc |
| Centering Diameter | 72.4 mm |
| Minimum thickness | 8.5 mm |
| Rotor Style | Solid |
| Brake Disc Thickness | 10 mm |
| Height | 64.8 mm |
| Number of Holes | 5 |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Inspection Tag | ECE R90 Homologated |
| Quantity | 1 |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Hub Profile | 22 x 20.1 |
| Outer diameter | 200 mm |
| Function | Clutch Kit |
| Number of Parts | 3 -part |
| Type | Clutch Kit |
| Number of Teeth | 20 |
Important compatibility info
| Length 2 | 755 mm |
| Length 3 | 1078 mm |
| Length 4 | 1030 mm |
| Length 1 | 746 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Opening Temperature | 89 °C |
| Additional Information | with gaskets/seals |
| Function | Thermostat, coolant |
| Housing Type | with housing |
| Type | Thermostat, coolant |
Important compatibility info
| Opening Temperature | 95 °C |
| Housing Type | with housing |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
Important compatibility info
| Rotor Style | Vented |
| Inspection Tag | ECE R90 Homologated |
| Brake Disc Thickness | 27 mm |
| Outer diameter | 280 mm |
| Number of Holes | 6 |
| Height | 42.8 mm |
| Minimum thickness | 25 mm |
| Centering Diameter | 87 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Number of Holes | 5 |
| Surface | Coated |
| Outer diameter | 305 mm |
| Minimum thickness | 26 mm |
| Centering Diameter | 59 mm |
| Rotor Style | Vented |
| Brake Disc Thickness | 28 mm |
| Height | 45.7 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Placement on Vehicle | Front Axle |
| Type | Brake Disc Rotor |
| Inspection Tag | ECE R90 Homologated |
| Number of mounting bores | 5 |
Important compatibility info
| Version | Fitting Kit |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Material | Aluminium |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6834 |
Important compatibility info
| Number of Ribs | 7 |
| Impeller Diameter | 52 mm |
| Type | Water Pump, engine cooling |
| Water Pump Pulley Diameter | 120 mm |
| Function | Water Pump, engine cooling |
Important compatibility info
| Additional Information 2 | with bearing |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Paired article numbers | FSM5232 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
- 1x Borg & Beck Suspension Strut Support Mount (BSM5349)
- 1x Borg & Beck Rolling Bearing, suspension strut support mount (BSM5234)
Important compatibility info
| Impeller Diameter | 62 mm |
| Number of Ribs | 6 |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Water Pump Pulley Diameter | 95 mm |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Surface | Coated |
| Outer diameter | 320 mm |
| Number of Holes | 5 |
| Rotor Style | Vented |
| Brake Disc Thickness | 28 mm |
| Height | 48 mm |
| Minimum thickness | 26 mm |
| Centering Diameter | 72 mm |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Quantity | 1 |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 3 |
Important compatibility info
| Inner diameter | 13 mm |
| Placement on Vehicle | Right Front |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Length | 170 mm |
Important compatibility info
| Replaces | BTS402.75 |
| Opening Temperature | 75 °C |
| Additional Information | with gaskets/seals |
| Housing Type | with housing |
| Housing material | Aluminium |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































