Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.25 kg |
| Length | 520 mm |
| Housing Diameter | 18 mm |
| Eject Force | 300 N |
| Stroke | 205 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 284 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.40
Important compatibility info
| Weight | 0.419 kg |
| Outer diameter | 79 mm |
| Filter type | Spin-on Filter, with water drain screw |
| Type | Fuel filter |
| Function | Fuel filter |
| Height | 200 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.40
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 321 mm |
| Weight | 1.760 kg |
| Outer diameter 1 | 77 mm |
| Outer diameter 2 | 53 mm |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Wire Diameter | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.40
Important compatibility info
| Weight | 0.17 kg |
| Length | 123 mm |
| Outer diameter | 67 mm |
| Opening Temperature | 75 °C |
| Heating / Cooling | with vent hole |
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Type | Thermostat, coolant |
| Replaces | 48445 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.40
Important compatibility info
| Weight | 0.06 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 1000 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.41
Important compatibility info
| Weight | 3.763 kg |
| Placement on Vehicle | Front Axle |
| Length | 193.5 mm |
| Width | 77.5 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.5 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.41
Important compatibility info
| Weight | 0.530 kg |
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.41
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 122.4 mm |
| Width | 64.3 mm. 70.1 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.2 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Weight | 1.249 kg |
| Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.41
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Weight | 0.242 kg |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (188231)
- 2x Febi Protective Cap/Bellow, shock absorber (195026)
£30.41
Important compatibility info
| Weight | 0.840 kg |
| Width | 18 mm. 20 mm |
| Outer diameter | 68 mm. 78 mm |
| Inner diameter | 41 mm. 45 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (173865)
£30.42
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 540 mm |
| Additional Information | with rubber-metal mounts |
| Type | Rod/Strut, wheel suspension |
| Rod/Strut | Push Rod |
| Function | Rod/Strut, wheel suspension |
| Weight | 1.213 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.42
Important compatibility info
| Weight | 0.065 kg |
| Width | 15 mm |
| Number of Teeth | 130 |
| Belts | with trapezoidal tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.42
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 170217 |
| Function | Sensor, wheel speed |
| Cable Length | 940 mm |
| Type | Sensor, wheel speed |
| Weight | 0.089 kg |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.43
Important compatibility info
| Weight | 0.091 kg |
| Additional Information 2 | with seal ring |
| Length | 295 mm |
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Pump Type | Mono Pump |
| Type | Washer Fluid Pump, window cleaning |
| Function | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.43
Important compatibility info
| Placement on Vehicle | Front |
| Length | 2909 mm |
| Function | Cable Pull, parking brake |
| Weight | 1.253 kg |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.43
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 2.264 kg |
| Additional Information 2 | with spacer disc |
| Type | Mounting, leaf spring |
| Function | Mounting, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, leaf spring (26946)
- 1x Febi Spacer Ring, spring link console (26947)
£30.43
Important compatibility info
| Outer diameter | 37 mm |
| Number of Holes | 4 |
| Number of Teeth | 21 |
| Bolt Hole Circle Diameter | 100 mm |
| Weight | 1.446 kg |
| Placement on Vehicle | Front Axle |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
| Inner diameter | 27 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.43
Important compatibility info
| Weight | 0.491 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 161 253 115 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.43
Important compatibility info
| Weight | 0.227 kg |
| Cooling Hose | from engine to heat exchanger |
| Material | Plastic |
| Colour | Black |
| Function | Coolant Pipe |
| Extra Description | febi Plus |
| Additional Information 2 | with retaining strap |
| Type | Coolant Pipe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.44
Important compatibility info
| Hose Length | 420 mm |
| Function | Charge Air Hose |
| Width | 75 mm |
| Turbocharger line | Charge air cooler to intake manifold |
| Wall Thickness | 5 mm |
| Weight | 0.72 kg |
| Type | Charge Air Hose |
| Placement on Vehicle | Charge Air Cooler, Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.44
Important compatibility info
| Material | Aluminium |
| Weight | 0.900 kg |
| Paired article numbers | 31013 |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Left |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.44
Important compatibility info
| Weight | 0.010 kg |
| Number of Connectors / Ports | 2 |
| Pump Type | Mono Pump |
| Function | Washer Fluid Pump, window cleaning |
| Type | Washer Fluid Pump, window cleaning |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.44
Important compatibility info
| Resistance | 1185 Ohm |
| Additional Information | with bush |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 174326 |
| Number of Connectors / Ports | 2 |
| Weight | 0.148 kg |
| Cable Length | 3905 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.45
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 163.5 mm |
| Width | 54 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Weight | 1.820 kg |
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 16.5 mm |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.45
Important compatibility info
| Weight | 0.3 kg |
| Placement on Vehicle | both sides |
| Length | 500 mm |
| Housing Diameter | 18 mm |
| Eject Force | 574 N |
| Stroke | 171 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 276.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.45
Important compatibility info
| Weight | 2.15 kg |
| Type | Suspension Spring |
| Length | 388 mm |
| Outer diameter | 152 mm |
| Function | Suspension Spring |
| Placement on Vehicle | Front Axle |
| Number of Coils | 5.1 |
| Wire Diameter | 12.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.45
Important compatibility info
| Weight | 0.211 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 42 |
| Additional Information 2 | Requires special tools for mounting |
| Timing Chain Size | G67HP, G67HR |
| Function | Chain, oil pump drive |
| Type | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.46
Important compatibility info
| Resistance | 1185 Ohm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Cable Length | 1870 mm |
| Weight | 0.157 kg |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.46
Important compatibility info
| Weight | 0.104 kg |
| Paired article numbers | 176646 |
| Placement on Vehicle | Front Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 1150 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.47
Important compatibility info
| Gasket inner diameter | 98 mm |
| Function | Fuel filter |
| Gasket outer diameter | 107.2 mm |
| Type | Fuel filter |
| Filter type | Filter Insert |
| Inner diameter | 17 mm |
| Outer diameter | 94 mm |
| Height | 115 mm |
| Weight | 0.174 kg |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.47
Important compatibility info
| Weight | 0.302 kg |
| Seal Material | NBR (nitrile butadiene rubber) |
| Additional Information 2 | with oil sump gasket |
| Height | 54 mm |
| Width | 154 mm |
| Length | 178.2 mm |
| Type | Hydraulic Filter Kit, automatic transmission |
| Function | Hydraulic Filter Kit, automatic transmission |
| Transmission Type | 6-Speed Automatic Transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.47
Important compatibility info
| Function | Wheel Bearing Kit |
| Weight | 0.680 kg |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 35 mm |
| Outer diameter | 68 mm |
| Inner diameter | 41 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (173913)
- 1x Febi Circlip (173903)
- 1x Febi Shaft Seal, wheel bearing (173902)
£30.47
Important compatibility info
| Spanner Size | 24 |
| Additional Information | with lock nut |
| External Thread Size | M12 x 1,5 |
| Length | 216 mm |
| Internal Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 0.436 kg |
| Type | Tie Rod End |
| Function | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.48
Important compatibility info
| Weight | 1.91 kg |
| Placement on Vehicle | Front Axle |
| Length | 154.8 mm. 155.2 mm |
| Width | 63.6 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19.9 mm |
| Function | Brake Pad Set, disc brake |
| Brake System | ATE |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.48
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Sensor, coolant temperature |
| Thickness | 40 mm |
| Type | Sensor, coolant temperature |
| for OE number | 51.27421.0151 |
| Weight | 0.020 kg |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.48
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 358 mm |
| Function | Suspension Spring |
| Wire Diameter | 12.3 mm |
| Weight | 2.21 kg |
| Type | Suspension Spring |
| Outer diameter | 109 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.48
Important compatibility info
| Placement on Vehicle | Right |
| Length | 730 mm |
| Housing Diameter | 18 mm |
| Eject Force | 315 N |
| Stroke | 308 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Housing length | 390.5 mm |
| Weight | 0.341 kg |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.48
Important compatibility info
| Weight | 0.341 kg |
| Placement on Vehicle | Lower |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Cooling Hose | from thermostat to radiator |
| Function | Radiator Hose |
| Additional Information 2 | with quick couplers |
| Type | Radiator Hose |
| Hose Length | 290 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.48
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Weight | 3.064 kg |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 234 mm |
| Thickness | 44.8 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8.4 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 62.5 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| for OE number | 58411-B4300 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.48
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Weight | 2.720 kg |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 231 mm |
| Thickness | 34.5 mm |
| Brake Disc Thickness | 9 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 55 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.48
Important compatibility info
| Type | Gas Spring, bonnet |
| Weight | 0.265 kg |
| Length | 554 mm |
| Eject Force | 295 N |
| Stroke | 216 mm |
| Mounting points diameter | 18 mm |
| Placement on Vehicle | Left |
| Housing Diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Housing length | 307.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.49
Important compatibility info
| Outer diameter | 139 mm. 50 mm |
| Thickness | 101 mm |
| Inner diameter | 33 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 112 mm |
| Inner diameter 1 | 59 mm |
| Outer diameter 2 | 72 mm |
| Weight | 2.6 kg |
| Placement on Vehicle | Front Axle |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.49
Important compatibility info
| Width | 28 mm |
| Number of Teeth | 130 |
| Belts | with rounded tooth profile |
| Function | Timing Belt |
| Weight | 0.18 kg |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.49
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 106939 |
| Number of Connectors / Ports | 2. 4. 6 |
| Function | Sensor, wheel speed |
| Weight | 0.218 kg |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.49
Important compatibility info
| for OE number | 20576614 |
| Weight | 0.087 kg |
| Number of Connectors / Ports | 2 |
| Type | Sensor, coolant temperature |
| Function | Sensor, coolant temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.49
Important compatibility info
| Weight | 0.61 kg |
| Type | Parts Set, maintenance service |
| Function | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (37257)
- 1x Febi Air Filter (30368)
- 4x Febi Spark Plug (13536)
- 1x Febi Screw Plug, oil sump (04572)
- 1x Febi Filter, cabin air (11235)
£30.49
Important compatibility info
| Weight | 1.592 kg |
| Length | 155.1 mm |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with piston clip |
| Width | 55.1 mm. 60.6 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 17.2 mm |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.49
Important compatibility info
| Outer diameter | 75.4 mm |
| Weight | 0.493 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower, Front |
| Length | 86 mm |
| Width | 76 mm |
| Material | Rubber/Metal |
| Thickness | 86 mm |
| Inner diameter | 14.5 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Bearing/Mounting Type | Hydro Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.49
Important compatibility info
| Weight | 0.152 kg |
| Function | Valve, crankcase ventilation |
| for OE number | 06F 129 101 P S1 |
| Extra Description | febi Plus |
| Type | Valve, crankcase ventilation |
| Additional Information | with gasket/seal |
| Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Valve, crankcase ventilation (47725)
- 1x Febi Gasket, crankcase ventilation (44481)
£30.49
Important compatibility info
| Length | 232 mm |
| Height | 142 mm |
| Width | 195 mm |
| Filter type | Screen Filter |
| Function | Hydraulic Filter Kit, automatic transmission |
| Type | Hydraulic Filter Kit, automatic transmission |
| Weight | 0.325 kg |
| Additional Information 2 | with oil sump gasket |
| Number of mounting bores | 13 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.49
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023