Engine Oils

Carlube Triple R SAE 30 R-Tec 40 is a high-performance engine oil suitable for all naturally aspirated diesel engines and petrol engines where API SE is specified.

Blended from high-quality base stocks It contains low detergent additives, rust and corrosion inhibitors.
It provides good oxidation stability and can be used as a running-in oil.

• 6. Fill with an appropriate engine lubricant
• 5. Drain the flushing oil
• 4. Idle the engine for 5 – 10 minutes
• 3. Fill with Engine Flushing Oil
• 2. Drain the old oil
• 1. Run the engine until normal operating temperature is achieved

• SAE 30

Carlube Triple R 5W-30 R-Tec 18 is a trustworthy, reliable and robust engine oil that provides strong corrosion and wear protection to key components in an engine, maintaining a clean and high-performing engine for trouble-free driving.

Carlube Triple R 5W-30 R-Tec 18 is suitable for the latest direct engine gasoline engines in preventing low-speed pre-ignition and has proven real-world performance in conventional and hybrid vehicles.
They provide exceptional fuel economy particularly vehicles requiring the GM Dexos 1 specification. They are recommended by hybrid vehicle manufacturers because of their strong corrosion control, sludge control and excellent water tolerance.

Carlube Triple R 15W-40 R-Tec 36 is a trustworthy, reliable and robust engine oil that provides strong corrosion and wear protection to key components in an engine, maintaining a clean and high-performing engine for trouble-free driving.

Triple R 15W-40 R-Tec 36 is Suitable for gasoline engines providing excellent protection and preventing engine wear during startup. Recommended for light-duty service and moderate oil drains.
Triple R 15W-40 R-Tec 36 also provides good sludge control & excellent high-temperature deposit control and is a low-cost oil for basic API SL performance

Carlube Triple R 20W-50 R-Tec 37 mineral oil is formulated using the highest quality blend of mineral-based oils.

Mineral oils are mixed with advanced technology additives to give high anti-wear and detergency properties, thus providing longer engine life and maintaining maximum performance.
Carlube Triple R 20W-50 is R-Tec 37 is tried, tested and proven to provide strong wear protection, face the stresses of everyday driving with ease, tackling cold winter months in Northern Europe and beyond.
It protects engine components, maintaining a clean and high performing motor and strong corrosion protection.

• Provides ultimate engine protection for all driving conditions
• Suitable for a wide range of vehicles
• Blended with high quality synthetic and mineral base materials
• Fuel efficient multi-grade engine oil

• ACEA A3/B3, A3/B4, API SL/CF, VW 502.00/505.00, MB 229.1

Carlube Triple R 20W-50 R-Tec 38 mineral oil is formulated using the highest quality blend of mineral based oils.

Mineral oils are mixed with advanced technology additives to give high anti-wear and detergency properties.
Thus providing longer engine life

• Provides ultimate engine protection for all driving conditions
• Excellent sludge control for stop-go city motoring
• Blended with the latest additive technology
• Excellent high temperature stability

• ACEA A3/B3, A3/B4, E2, API SL/CH-4, CF, VW 505.00, MB 228.1, 229.1

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE Professional is micro-filtered and certified CO2 Neutral according to the highest global standard*. Its patented Fluid TITANIUM transforms to be stronger under pressure and reduces friction for maximum engine performance when you need it most.

Castrol EDGE Professional with Fluid TITANIUM: unlock the true performance of your engine.

* in accordance with the BSI PAS 2060 specification

Application

Castrol EDGE Professional E 0W-30 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA C2 0W-30 lubricant.

Castrol EDGE Professional E 0W-30 is approved for use in vehicles where a Jaguar Land Rover engine oil specification STJLR.03.5007 0W-30 lubricant is required. Please refer to your owners handbook.

Advantages

Castrol EDGE Professional E 0W-30 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's sophisticated vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low temperature performance

Product Performance Claims

• ACEA C2
• Jaguar Land Rover engine oil specification STJLR.03.5007

• Castrol EDGE Professional E 0W-30 is suitable for petrol, diesel and hybrid cars and designed to meet the latest specifications required by modern engines where the vehicle manufacturer recommends an ACEA C2 0W-30 lubricant.
• Delivers more horsepower and greater acceleration to get you more metres ahead
• Demonstrates improved performance as a result of better fuel economy
• Stronger under pressure in today’s modern engines
• Recommended for world-leading car manufacturers
• Suitable for use in hybrid cars

• Product Performance Claims: ACEA C2
• Jaguar Land Rover engine oil specification STJLR.03.5007

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic