Hose & Pipe

This roll of fuel hose from Pearl Automotive is 3/8 inch hose with a 6mm internal diameter. It comes in a 5m roll made from MBR.CR suitable for leaded, unleaded and diesel fuels.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Made from NBR/PVC with polyester outer suitable for leaded/unleaded and diesel engine non injection
• 5m roll with an outer braided covering
• Fuel hose 3/8in. 10mm inside diameter

• SAE J30R6

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• 304 grade stainless steel
• Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
• The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
• The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
• The original worm drive hose clip

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• 304 grade stainless steel
• Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
• The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
• The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
• The original worm drive hose clip

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• 304 grade stainless steel
• Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
• The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
• The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
• The original worm drive hose clip

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Inc. Brass Olives
• Straight Connector

The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.

In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.

• Contents include: 5x 25-50mm clips and 10x 40-110mm clips
• Manufactured in 304 grade stainless steel
• Can be easily installed by interlocking the clip hooks on the outside band and crimping the ear to secure
• They also prevent lubricants from leaking
• These clips secure the rubber bellows to the CV (constant velocity) joint and protect it from dirt and water

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Qty: 5
• Inc. Brass Olives
• Metric Sizes
• Straight Connector

• 304 grade stainless steel
• Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
• The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
• The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
• The original worm drive hose clip

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pack of 50
• Twin ear O Clips
• Zinc Plated
• Mild Steel

• 7/8in. (20-23mm)

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
• 7mm A/F screw fastening
• Used in applications such as securing fuel lines and heater hoses
• Ideal for small bore hoses with relatively low pressures, where little clamping force is required
• Mini clips, also known as nut & bolt clips

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Qty: 30
• DIN 3017
• Zinc Coated Mild Steel
• Worm Drive

• 304 grade stainless steel
• Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
• The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
• The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
• The original worm drive hose clip

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.