Proud to be a UK-based company
Contact usHose & Pipe
Maintenance Sub-Categories
invoice Page 7 of 18
Results 301 - 350 of 853
Part number: 7036
Important compatibility info
| Operating temperature to | +100 °C |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Operating temperature from | -40 °C |
| Hose length | 0.6 m |
| Function | Hose |
| Working pressure | 2.3 bar |
| Inner diameter 2 | 50 mm |
| Inner diameter 1 | 50 mm |
| Type | Hose |
ONLY
£24.81
£24.81
Part number: 0SS
Important compatibility info
| Title | Hose Clips S/S 0 16-22mm - Box of 10 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- 304 grade stainless steel
- Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
- The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
- The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
- The original worm drive hose clip
ONLY
£24.71
£24.71
Part number: 179744
Important compatibility info
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£24.57
£24.57
Part number: 3225-00072
Important compatibility info
ONLY
£24.52
£24.52
Part number: EMH714
Important compatibility info
| Inner diameter 1 | 14.5 mm |
| Colour | Black |
| Material | Plastic |
| Inner diameter 2 | 14.5 mm |
| Type | Hose, crankcase ventilation |
| Hose Length | 330 mm |
| Function | Hose, crankcase ventilation |
ONLY
£24.30
£24.30
Part number: 102606
Important compatibility info
| Function | Hose, air supply |
| Extra Description | febi Plus |
| Additional Information 2 | with quick couplers |
| Type | Hose, air supply |
| Inner diameter | 18 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£24.22
£24.22
Part number: 170094
This part is not listed as a fit for your vehicle!
Important compatibility info
| Function | Hose, crankcase ventilation |
| Height | 45 mm |
| Width | 110 mm |
| for OE number | 11 15 7 533 341 |
| Inner diameter 2 | 13 mm |
| Inner diameter 1 | 16 mm |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
| Additional Information 2 | with quick couplers |
| Hose Length | 310 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£24.11
£24.11
Part number: 47227
Important compatibility info
| Function | Hose, crankcase ventilation |
| Placement on Vehicle | Centre |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
| Additional Information 2 | with quick couplers |
| Hose Length | 305 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£24.11
£24.11
Part number: EMH726
Important compatibility info
| Inner diameter 1 | 18 mm |
| Colour | Black |
| Type | Hose, crankcase ventilation |
| Hose Length | 280 mm |
| Function | Hose, crankcase ventilation |
| Material | Plastic |
ONLY
£24.09
£24.09
Part number: EMH148
Important compatibility info
| Function | Hose, crankcase ventilation |
| Colour | Black |
| Material | Plastic |
| Inner diameter 2 | 5 mm |
| Inner diameter 1 | 8 mm |
| Type | Hose, crankcase ventilation |
| Hose Length | 420 mm |
ONLY
£24.01
£24.01
Part number: EMH420
Important compatibility info
| Inner diameter 1 | 16 mm |
| Inner diameter 2 | 16 mm |
| Material | Plastic |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
| Hose Length | 355 mm |
| Placement on Vehicle | from cylinder head cover to oil separator |
ONLY
£24.01
£24.01
Part number: MFL1290
Important compatibility info
| Colour | Black |
| Type | Fuel Hose |
| Function | Fuel Hose |
| Material | Plastic |
ONLY
£23.78
£23.78
Part number: EMH656
Important compatibility info
| Function | Hose, crankcase ventilation |
| Hose Length | 280 mm |
| Type | Hose, crankcase ventilation |
| Colour | Black |
| Inner diameter 2 | 16 mm |
| Material | Plastic |
| Inner diameter 1 | 16 mm |
ONLY
£23.74
£23.74
Part number: EMH636
Important compatibility info
| Hose Length | 330 mm |
| Inner diameter 2 | 18.5 mm |
| Placement on Vehicle | from cylinder head cover to oil separator |
| Material | Plastic |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
| Inner diameter 1 | 18.5 mm |
ONLY
£23.73
£23.73
Part number: NB1315
Important compatibility info
| Title | Junior Clips M/S 13-15mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
- 7mm A/F screw fastening
- Used in applications such as securing fuel lines and heater hoses
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Mini clips, also known as nut & bolt clips
ONLY
£23.65
£23.65
Part number: MFL1248
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Type | Hose, fuel overflow |
| Function | Hose, fuel overflow |
ONLY
£23.61
£23.61
Part number: 36903
Important compatibility info
| Colour | Black |
| Placement on Vehicle | from cooling pipe to hydraulic pump |
| Length | 615 mm |
| Material | NBR (nitrile butadiene rubber) |
| Function | Hydraulic Hose, steering |
| Driver Position | for left-hand/right-hand drive vehicles |
| Type | Hydraulic Hose, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£23.60
£23.60
Part number: MFL1298
Important compatibility info
| Placement on Vehicle | between high-pressure pump and fuel press. regulating valve |
| Material | Plastic |
| Colour | White-transparent |
| Type | Fuel Hose |
| Function | Fuel Hose |
ONLY
£23.51
£23.51
Part number: NB1517
Important compatibility info
| Title | Junior Clips M/S 15-17mm - Pack of 50 |
Additional Information
Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible.
The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.
In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
- 7mm A/F screw fastening
- Used in applications such as securing fuel lines and heater hoses
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Mini clips, also known as nut & bolt clips
ONLY
£23.47
£23.47
Part number: NB1618
Important compatibility info
| Title | Junior Clips M/S 16-18mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
- 7mm A/F screw fastening
- Used in applications such as securing fuel lines and heater hoses
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Mini clips, also known as nut & bolt clips
ONLY
£23.47
£23.47
Part number: MFL1089
This part is not listed as a fit for your vehicle!
Important compatibility info
| Material | Plastic |
| Colour | White-transparent |
| Function | Fuel Hose |
| Type | Fuel Hose |
| Placement on Vehicle | between fuel filter and high-pressure pump |
ONLY
£23.46
£23.46
Part number: EMH332
Important compatibility info
| Hose Length | 241 mm |
| Inner diameter 1 | 12.5 mm |
| Inner diameter 2 | 12.5 mm |
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
ONLY
£23.43
£23.43
Part number: NB1113
Important compatibility info
| Title | Junior Clips M/S 11-13mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
- 7mm A/F screw fastening
- Used in applications such as securing fuel lines and heater hoses
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Mini clips, also known as nut & bolt clips
ONLY
£23.42
£23.42
Part number: NB1214
Important compatibility info
| Title | Junior Clips M/S 12-14mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
- 7mm A/F screw fastening
- Used in applications such as securing fuel lines and heater hoses
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Mini clips, also known as nut & bolt clips
ONLY
£23.42
£23.42
Part number: MFL1284
Important compatibility info
| Material | Plastic |
| Type | Fuel Hose |
| Colour | Black |
| Function | Fuel Hose |
ONLY
£23.30
£23.30
Part number: MFL1375
Important compatibility info
| Placement on Vehicle | Fuel pump to filter |
| Material | Plastic |
| Inner diameter 1 | 8 mm |
| Colour | Black |
| Inner diameter 2 | 7 mm |
| Type | Fuel Hose |
| Hose Length | 570 mm |
| Function | Fuel Hose |
ONLY
£23.29
£23.29
Part number: NB1416
Important compatibility info
| Title | Junior Clips M/S 14-16mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
- 7mm A/F screw fastening
- Used in applications such as securing fuel lines and heater hoses
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Mini clips, also known as nut & bolt clips
ONLY
£23.26
£23.26
Part number: MFL1207
Important compatibility info
| Hose Length | 455 mm |
| Placement on Vehicle | High-pressure pump to fuel distributor |
| Material | Plastic |
| Colour | White-transparent |
| Function | Fuel Hose |
| Inner diameter 2 | 6 mm |
| Inner diameter 1 | 6 mm |
| Type | Fuel Hose |
ONLY
£23.18
£23.18
Part number: 27220
Important compatibility info
| Function | Hydraulic Hose, steering |
| Placement on Vehicle | from fluid reservoir to hydraulic pump |
| Wall Thickness | 3.5 mm |
| Type | Hydraulic Hose, steering |
| Material | NBR (nitrile butadiene rubber) |
| Hose Length | 320 mm |
| Inner diameter | 14 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£23.12
£23.12
Part number: 45531
This part is not listed as a fit for your vehicle!
Important compatibility info
| Inner diameter 2 | 17.5 mm |
| Material | Rubber |
| Inner diameter | 17.5 mm |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
| Inner diameter 1 | 13.5 mm |
| Type | Hose, crankcase ventilation |
| Hose Length | 295 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£23.12
£23.12
Part number: MFL1320
Important compatibility info
| Material | Plastic |
| Inner diameter 1 | 8 mm |
| Colour | Black |
| Inner diameter 2 | 8 mm |
| Type | Fuel Hose |
| Hose Length | 500 mm |
| Function | Fuel Hose |
ONLY
£23.11
£23.11
Part number: EMH410
Important compatibility info
| Inner diameter 2 | 16.5 mm |
| Hose Length | 300 mm |
| Inner diameter 1 | 16.5 mm |
| Material | Plastic |
| Colour | Black |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
ONLY
£23.10
£23.10
Part number: MFL1237
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Type | Fuel Hose |
| Function | Fuel Hose |
| Placement on Vehicle | Fuel Tank |
ONLY
£23.08
£23.08
Part number: 3225-00071
Important compatibility info
ONLY
£23.02
£23.02
Part number: MFL1131
This part is not listed as a fit for your vehicle!
Important compatibility info
| Function | Fuel Hose |
| Colour | White-transparent |
| Material | Plastic |
| Inner diameter 1 | 9 mm |
| Inner diameter 2 | 6 mm |
| Placement on Vehicle | between high-pressure pump and fuel press. regulating valve |
| Hose Length | 855 mm |
| Type | Fuel Hose |
ONLY
£22.95
£22.95
Part number: EMH246
Important compatibility info
| Inner diameter 1 | 12 mm |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
| Material | Plastic |
| Hose Length | 173 mm |
| Inner diameter 2 | 12 mm |
ONLY
£22.92
£22.92
Part number: MFL1179
Important compatibility info
| Inner diameter 1 | 8 mm |
| Inner diameter 2 | 8 mm |
| Hose Length | 315 mm |
| Material | Plastic |
| Colour | Black |
| Function | Fuel Hose |
| Type | Fuel Hose |
ONLY
£22.89
£22.89
Part number: MFL1230
Important compatibility info
| Material | Plastic |
| Colour | White-transparent |
| Type | Fuel Hose |
| Function | Fuel Hose |
| Inner diameter 2 | 6 mm |
| Hose Length | 940 mm |
| Inner diameter 1 | 9 mm |
| Placement on Vehicle | Between supply pump and fuel rail |
ONLY
£22.79
£22.79
Part number: EMH129
Important compatibility info
| Inner diameter 2 | 10 mm |
| Hose Length | 250 mm |
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Inner diameter 1 | 10 mm |
| Type | Hose, crankcase ventilation |
ONLY
£22.63
£22.63
Part number: 171008
Important compatibility info
| Height | 35 mm |
| Width | 90 mm |
| Inner diameter 1 | 10 mm |
| Inner diameter 2 | 23 mm |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
| Hose Length | 310 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£22.62
£22.62
Part number: MFL1264
Important compatibility info
| Inner diameter 1 | 8 mm |
| Function | Hose, fuel overflow |
| Type | Hose, fuel overflow |
| Inner diameter 2 | 8 mm |
| Colour | Blue |
| Material | NBR (nitrile butadiene rubber) |
| Hose Length | 495 mm |
ONLY
£22.62
£22.62
Part number: EMH569
Important compatibility info
| Inner diameter 2 | 12.5 mm |
| Hose Length | 240 mm |
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
| Inner diameter 1 | 12.5 mm |
| Placement on Vehicle | Right |
ONLY
£22.61
£22.61
Part number: EMH472
Important compatibility info
| Hose Length | 180 mm |
| Inner diameter 2 | 18 mm |
| Material | Plastic |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
| Inner diameter 1 | 24 mm |
ONLY
£22.60
£22.60
Part number: 02-1731
Important compatibility info
| Pipe length | 350 mm |
| Material | Plastic |
| Colour | Black |
| Function | Coolant Pipe |
| Inner diameter 2 | 32 mm |
| Inner diameter 1 | 47 mm |
| Type | Coolant Pipe |
ONLY
£22.56
£22.56
Part number: 46302
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Placement on Vehicle | Upper |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
| Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£22.49
£22.49
Part number: 47228
Important compatibility info
| Placement on Vehicle | Upper |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
| Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£22.47
£22.47
Part number: NB0810
Important compatibility info
| Title | Junior Clips M/S 8-10mm - Pack of 50 |
Additional Information
Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.
In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
- 7mm A/F screw fastening
- Used in applications such as securing fuel lines and heater hoses
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Mini clips, also known as nut & bolt clips
ONLY
£22.46
£22.46
Part number: NB0911
Important compatibility info
| Title | Junior Clips M/S 9-11mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
- 7mm A/F screw fastening
- Used in applications such as securing fuel lines and heater hoses
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Mini clips, also known as nut & bolt clips
ONLY
£22.46
£22.46
Part number: EMH452
Important compatibility info
| Hose Length | 168 mm |
| Material | Plastic |
| Colour | Black |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
| Inner diameter 2 | 16 mm |
| Inner diameter 1 | 16 mm |
ONLY
£22.45
£22.45
Part number: EMH657
Important compatibility info
| Colour | Black |
| Material | Plastic |
| Function | Hose, crankcase ventilation |
| Hose Length | 220 mm |
| Type | Hose, crankcase ventilation |
| Inner diameter 2 | 18.5 mm |
| Inner diameter 1 | 18.5 mm |
ONLY
£22.33
£22.33
Page 7 of 18
Hose & Pipe
