Workshop Tools

Safety information

Safety First Read the operating and safety instruction. Follow them carefully. Maximum safe operating pressure 9 bar (125 psi). Air lines are dangerous - use them correctly Putting into service Before use check cap-retaining screws are secure.If the Air tool is dropped check for cracked components. Check air line pressure before connecting the Air tool.The Air tool should be used only by people trained in the use of pneumatically operated tools. Use Keep hands away from moving parts. Never operate the Air tool near the face or body. Only use Air tool to fit CV boots. If air line pressure exceeds 9 bar fit a regulator. Disconnect the Air tool from the air supply after use.

Installation Information

Operation: 1. Slide boot onto arms, large end first. The arms should just protrude from the small end of the boot. To fit a boot to an inner joint, turn the boot inside out before sliding i onto the Airtools´s arm. 2. Press " + " button until arms open enough to pass over the joint. Keep hands clear of moving parts. The air line can now be disconnected. The arms will remain open until the " - " button is pressed. 3. Place Airtool over CV joint and press release button (" -"). Keep hands away from moving parts. 4. Withdraw the Airtool, leaving the boot in position. Complete the installation in the normal way.

• Service Your Vehicles Safely: Electric and hybrid vehicles feature battery systems that need to be disconnected to prevent error or shock prior to service; Use the Power Probe VT750 LCD Car Voltage Meter Tester to ensure your battery voltage reads zero be
• Reliable Detection for Optimal Safety: Auto electric tester tool has a voltage rating from 12 to 750 volts and overvoltage protection up to 1000 volts AC/DC
• Compact Two-Prong Design: 9.4-inch (23.9cm) fixed probe housing and secondary electrical tester pole work together to prevent false readings and measure accurate, exact voltage (AC/DC) current
• Quality You Can Trust: Thick material ensures durability for the volt meter, while the retracting insulators help prevent any accidental shorts between the probes or surrounding objects
• Easy To Use: 10 minutes after disconnecting the 12-volt and high-volt batteries, complete a Live-Dead-Live test; Check 12v battery for a baseline, check high-volt battery for a dead or zero reading, then re-verify the electrical meter is still functioning

• Voltage Testing Range: 12V to 750V AC/DC
• Continuity Testing: Audible beep for continuity detection
• Display: LCD with clear digital readings
• Voltage Indication: Provides AC and DC voltage differentiation
• Polarity Detection: Identifies positive and negative poles
• Safety Compliance: CAT III 750V certification
• Response Time: Quick response for voltage and continuity checks
• Overvoltage Protection: Protects the device during high voltage surges
• Power Source: No batteries required, powered by the voltage under test
• Operating Environment: Designed for 0°C to 40°C, with 80% relative humidity tolerance
• Build Quality: Durable, ergonomic design with protective housing
• Probes: Integrated test probes with secure connectors.

• Reduces the Power Probe tip battery voltage to 5V and limits the current output works with PP3EZREDAS
• Simple add-on accessory that works with all Power Probes with 4mm banana tip
• Safely simulate sensor reference voltages and outputs without damaging components

• Voltage Output: 5V regulated output
• Connector Type: Standard 4mm banana connector
• Compatibility: Works with Power Probe Circuit Testers (PPBasic, PP3 Series, PP4 Series, Pro Series)
• Adapter Requirement for Older Models: Requires banana jack conversion kit (#PNLS020A) for PP1 and PP2 models
• LED Indicator: Red LED illuminates to show active 5V output
• Ground Connection: Includes auxiliary ground lead clip for secure grounding
• Durability: Built with rugged materials for long-term use
• Use Case: Supplies a stable 5V to test circuits and components in vehicles
• Dimensions and Weight: Compact and lightweight for easy portability.

• ADJUSTABLE DUTY CYCLE from 5% to 100% with side buttons
• COMPATABLE WITH all Power Probe models with a 4mm banana jack in/out
• EASY INSTALL by removing power probe tip and inserting adapter into banana jack
• GREAT FOR diagnosing circuit fan issues

• Voltage Range: Operates between 9V and 24V DC
• Current Capacity: Maximum 40A output
• Frequency Range: Adjustable pulse width modulation (PWM) frequency from 10Hz to 200Hz
• Duty Cycle Range: Adjustable from 0% to 100%
• Input Protection: Overvoltage and reverse polarity protection
• Output Control: Variable output power via rotary dial
• Dimensions: Compact enclosure design for portability
• Connection Interface: Equipped with standard terminals for easy wiring
• Operating Temperature: -20°C to 60°C
• Housing: Durable and lightweight for automotive or workshop use
• Indicators: LED indicators for power status and output activity.

• Signal Locking will show the correct direction to a short to ground
• Signal distance bar indicates distance height from short to ground or open circuits
• LED light on receiver illuminates the work space area
• Longer 10-minute Auto shut off time

• Operating Voltage (Transmitter): 6V-48V DC
• Current Consumption (Transmitter): <200mA
• Operating Voltage (Receiver): 2 AAA batteries
• Signal Frequency: 4kHz polarized signal
• Circuit Testing Modes: Open circuit tracking
• short circuit tracking
• ground circuit tracking
• Operating Temperature: Up to 50°C
• Storage Temperature: Up to 70°C
• Maximum Humidity: 80% non-condensing
• Altitude Limit: <2000m
• Signal Detection: Indicates short and open circuits using visual and audio cues
• Sensitivity Adjustment: Adjustable for varying signal strengths
• Auto Shutoff: Receiver turns off after 10 minutes of inactivity
• Accessories Compatibility: Standard 4mm banana jack connectors for custom adapters
• Cable Length: 6m transmitter power cable for extended reach.

• Power Probe OBD II Breakout Testing Box
• Tests DLC (OBD port) for any abnormalities, such as shorting or reverse polarity at the pins before connecting other diagnostic equipment.
• quickly accss all 16 pins connections during repair and diagnosois of the vehicle

• Voltage Monitoring Range: 7.0V to 30.0V DC input
• Maximum Load: Up to 3.0A output
• Overload Protection: PTC self-healing fuse
• LED Displays: 3-digit resolution of 0.1V
• Banana Sockets: 16 outputs with 1.0mm diameter and LED indicators
• Protocols Detected: PWM (J1850)
• VPW (J1850)
• ISO 9141-2
• DIS/ISO 14230-4
• CAN bus (J-2284)
• Temperature Range: Suitable for automotive environments
• Humidity Tolerance: Less than 70%
• Cable Length: 30 inches (0.8 meters)
• Polarity Protection: Detects reverse polarity with red LED for pins 4 and 5
• Voltage Alerts: Slow beeps for low voltage (<11.8V for 12V systems)
• fast beeps for high voltage (>15.5V for 12V systems)
• Diagnostic Features: Monitors individual pins for voltage presence
• detects communication protocol signals
• DLC Connector Flashlight: Built-in light for easier connection
• Battery Type for Flashlight: CR1220 coin battery.

• Monitors car battery voltage and parasitic current draw for accurate diagnostics.
• Connects via 16-pin OBDII connector to supply 12V power and prevent data loss during battery replacement.
• Graphing mode displays voltage and amperage as a waveform, allowing in-depth electrical system analysis.
• Rechargeable high-capacity lithium-ion battery with USB-C charging and multi-color TFT display.
• Adjustable current output alarm and auto power-off settings to protect the vehicle’s electrical system.
• View and record real-time data via Bluetooth on the Power Probe Link app for enhanced performance tracking.

• Voltage Monitoring Monitors car battery voltage (0-30V)
• Current Monitoring Detects leakage current with a resolution of 1mA
• Smart Output: Outputs 12V at up to 10A for backup power supply during battery replacement
• Bluetooth Connectivity Bluetooth 5.0 for remote monitoring via PowerProbe Link App
• Display: 2.8-inch TFT color screen with graphical and numerical modes
• Graphical Mode: Displays 20-second voltage and current history as waveforms
• Safety Features: Includes overvoltage (above 30V), overcurrent (above 10A), and temperature protection
• Power Source: Built-in 14.4V, 3000mAh lithium battery
• Charging Interface: USB Type-C, supports PD fast charging
• System Settings: Configurable auto power-off time and current alarm thresholds
• Certifications: FCC, CE, ETL-us, UKCA, EAC
• Interface: Standard OBDII input/output interface
• Durability: Designed for automotive environments.

• Built Shop Tough with Heavy Duty Construction case
• Loud Indicator Tones for Shop Environments
• Digital Multimeter for streamlined testing
• Large Bright Screen for easy readings

• Measurement Capabilities: True RMS AC/DC voltage up to 1000V
• DC current up to 10A
• resistance up to 40MΩ
• Capacitance Measurement: Measures up to 100μF
• Frequency and Duty Cycle: Measures frequency up to 10MHz
• duty cycle from 0.1%-99.9%
• Continuity and Diode Testing: Audible alert for continuity and diode voltage drop testing
• Display: Backlit digital display with 6000 counts
• Safety Standards: CAT IV 600V
• CAT III 1000V compliant
• Auto Range Function: Automatically selects the appropriate measurement range
• Data Hold: Locks the displayed measurement for ease of recording
• Low Battery Indicator: Alerts users to replace batteries
• Durability: Drop-tested for up to 4 feet and designed for rugged use
• Power Supply: Operates on standard AAA batteries.

• Added Convenience: The Power Probe DM500MAX Automotive Multimeter Voltage Tester has automatic back light that adjusts to changing light conditions; Drop resistant protective rubber holster
• Measuring Voltage: Accurately and automatically determine both AC and DC voltage from 0.01mV-1000V with 600V cat IV and 100V Cat III safety rating for testing vehicle batteries or home appliances
• Testing Current: Correctly calibrate amperage for both AC and DC currents with auto-range metering from 0.01mA-10.00A; Determine whether or not an outlet is active or if solar cells function properly
• For All Electrical Testing: Power Probe digital multimeters don’t just measure voltage and amperage but also resistance, frequency, continuity, capacitance, and even temperature
• Multimeter kit includes a DM500MAX multimeter, drop resistant rubber housing with kickstand, magnetic strap, 2 test leads (1 black, 1 red), 2 alligator clip lead attachments (1 black, 1 red), a USB plug, K-type thermocouple, and 4 AA batteries

• Measurement Capabilities: True RMS AC/DC voltage up to 1000V
• DC current up to 30A
• resistance up to 60MΩ
• Automotive Diagnostics: Cranking voltage tests
• alternator charging system tests for 12V/24V
• Fuse Current Testing: Measures current through fuses without removal (2A to 80A)
• Frequency and Duty Cycle: Measures PWM signals up to 40kHz
• duty cycle range: 1%-99%
• Thermal Imaging: Integrated infrared temperature measurement for advanced diagnostics
• Display: 3.5” high-resolution TFT color LCD with customizable interfaces
• Power Source: Rechargeable lithium-ion battery
• Durability: 4-foot drop protection
• IP54 dust and water resistance
• Safety Ratings: CAT IV 600V
• CAT III 1000V certified
• Data Storage: On-device memory for saving multiple test results.

• Measures current Flowing through fuses without removing the fuse (up to 80A)
• Fuse Voltage drop testing
• Guided automotive test mode
• AC/DC Voltage measurements up to 1000V
• Current measurements up to 30A
• Measures resistance, continuity and diode testing
• Frequency and duty cycle for PWM signals

• Measurement Capabilities: True RMS AC/DC voltage up to 1000V
• DC current up to 30A
• resistance up to 40.00MΩ
• Automotive-Specific Functions: Cranking voltage tests for 12V/24V starters
• alternator charging tests for normal/smart alternators
• Fuse Testing: Measures current through fuses without removal (2A to 80A)
• Frequency and Duty Cycle Measurement: Measures PWM signals up to 20.00kHz and duty cycles from 1%-99%
• Continuity and Diode Testing: Provides audible and visual feedback
• Display: 2.8” TFT color LCD with a user-friendly menu
• Power Supply: Powered by 3 AAA alkaline batteries
• Durability: Drop protection for up to 4 feet
• Safety Standards: CAT IV 600V
• CAT III 1000V rated
• Dimensions: 92.6mm x 205mm x 57.5mm
• weight: 588g
• Accessories: Includes 30A probe
• test leads
• fuse current probe set
• alligator clips.

• Switch latch for constant power
• Automatic circuit breaker reset
• Auxiliary ground lead holder

• Voltage Detection Range: Detects low to high AC voltages
• Non-Contact Operation: Ensures safety during electrical testing
• LED Indicators: Provides visual feedback for voltage detection
• Compact Design: Small and lightweight for convenient use
• Frequency Compatibility: Operates at standard electrical frequencies
• Durability: Engineered for regular use with robust construction
• Battery Operated: Powered by alkaline batteries
• Compliance: Meets international electrical safety standards.

• Tests Bad Grounds and Short Circuits
• Supplies Power and Ground
• Digital Voltmeter with Min/Max Voltage Capturing
• Navigation Menu for EZ Learning

• Voltage Detection Range: Supports low and high AC voltage detection
• LED Indicators: Visual indication of circuit status and voltage presence
• Non-Contact Operation: Safely detects voltage without direct contact
• Frequency Compatibility: Operates effectively at standard electrical frequencies
• Durability: Designed for robust field use with protective casing
• Ease of Use: Features ergonomic design and intuitive operation
• Compliance: Adheres to international electrical safety standards
• Battery Operated: Uses standard alkaline batteries for portability.

• Insulation Test with PI/DAR/Timed
• mA-selectable mode
• Auto bi-direction continuity Test
• Visual/acoustic compare function
• Auto AC/DC Voltage Test with LPF
• 1500 records of Store/Recall

• Measures AC Voltage(ACV)
• DC Voltage(DCV)
• Frequency
• Earth-bond Resistance(Continuity)
• Capacitance
• Insulation Resistance
• Features Auto-sense mode for automatic detection of ACV or DCV
• Insulation test range: 50V to 1000V with maximum resistance range up to 200GΩ
• Earth-bond resistance measurement range: 0.01Ω to 40.00kΩ
• Capacitance measurement range: 0.1nF to 10.00uF
• Bluetooth Low Energy(BLE) V5.0 for wireless data transfer
• Compliance with IEC/EN 61010-1 and IEC/EN 61557 standards
• IP40 rated for dust resistance
• operates up to an altitude of 2000m
• True RMS measurements
• automatic discharge function
• CAT IV 600V rated
• supports up to 1500 stored readings
• Auto power-off for battery preservation
• Dimensions: 96mm x 207mm x 54mm
• weight: 630g
• powered by 4 AA batteries.

• For use with the Power-TEC AirSaw (Part No. 92306)
• 18TPI
• Strong steel to reduce saw shake and improve cutting capability

• Pack of 5
• 280 micron mesh filters
• Designed for DeVilbiss, SATA and Iwata spray guns
• Gravity feed gun filter

• Most commonly used for the cleaning and removal of corrosion on metal
• Made from steel strands
• Brush constructed of wood housing wire strands, available in four, three or two rows

• Most commonly used for the cleaning and removal of corrosion on metal
• Made from steel strands
• Brush constructed of wood housing wire strands, available in four, three or two rows

Pearl has established a reputation over the years for delivering high quality products. With recent expansions into a more diverse product portfolio of automotive products, its established Wot Nots' brand is still thriving. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Can also be used on cycles
• These caps are used to stop dirt entering the Schrader Valve on tyres

• Supplied in Black plastic