Workshop Tools

• Simple and easy to use, ideal for general low volume tyre inflation
• Has a durable alloy body and Euro style valve connector, and comes complete with operating instructions
• General purpose tyre inflator with an all Alloy body with a rubber protected gauge

• Reading Accuracy: 2 psi / 0.1 bar / 10 kPa Calibration: 10-210 psi / 0.7-15 bar Maximum Inlet Pressure: 15 bar Hose length: 0.85 m Tyre Valve Connection: Euro Clip-on Inlet Thread: G 1/4 l/min

• Flexible battery system: works with all MILWAUKEE® M18™ batteries
• 135° rotating head allows the user to easily direct the light beam at the desired work area
• Sealed aluminium head is designed for impact- and weather-resistant durability
• The 120 lumen LED light is 2x brighter and whiter than conventional incandescent bulbs
• Integrated hook for hands-free use
• M18™ LED electronics deliver 2x longer run time on a single charge with less heat than conventional removable light bulbs

• Gas cartridge sold separately
• For use with G2400 Go System propane gas cylinder
• Fitted with CGA600 connection
• Safety checked and test burned
• Ideal for plumbing, brazing and automotive
• Auto start Piezo ignition
• Swirl flame for more even heat distribution, wrapping around the target
• Instantly FLARESAFE; use at any angle
• A durable high power, high temperature (up to 1500 C) gas torch
• Ergonomic handle for maximum grip

• Conforms to BS:EN521

General Information

Brake Fluid Tester

• PLEASE NOTE - NOT SUITABLE FOR SILICONE BASED DOT 5 FLUID
• Suitable for DOT 3, DOT 4 & DOT 5.1
• Battery supplied
• Colour coded LEDs show level of water
• Quick and simple tool
• Essential safety check
• Identify percentage of water in brake fluid

• 0.5kg Reel
• Pack of 1
• Flux impregnated
• Material : 40% Tin/60% Lead

• Thumb and four finger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.
• Serrated cutting edges prevent slippage when cutting.
• Less hand fatigue when cutting thicker materials. Design with compound leverage action.
• Torsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.
• Chrome plated rust protected forged blades for increased lifetime. Extra hardened to 65 HRC.
• Made from forged alloy steel for best durability – Cr Steel.
• One hand locking mechanism.
• Flush slimline design for non-snagging in material.
• Triple cutting direction identification – on the head, handle and by colour coded handle.
• Ergonomic and durable overmoulded grips add comfort and last longer.
• Aviation snips: For short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.

• Insulated
• Hardened
• CR-MO
• Combination, Long Nose, Diagonal, Cutting and Wire Stripping
• Comfort non-slip grip

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• One hand locking mechanism.
• Made from forged alloy steel for best durability – Cr Steel.
• Less hand fatigue when cutting thicker materials. Design with compound leverage action.
• Aviation snips: For short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.
• Ergonomic and durable overmoulded grips add comfort and last longer.
• Triple cutting direction identification – on the head, handle and by colour coded handle.
• Torsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.
• Thumb and forefinger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.
• Extra long aviation snips: For longer and straighter cuts in one go.
• Offset snips: For long continuous straight or curved cuts. 45° offset keeps users hand away from the cutting material.
• Chrome plated rust protected forged blades for increased lifetime. Extra hardened to 65 HRC.
• Serrated cutting edges prevent slippage when cutting.
• Flush slimline design for non-snagging in material.

• One hand locking mechanism.
• Made from forged alloy steel for best durability – Cr Steel.
• Less hand fatigue when cutting thicker materials. Design with compound leverage action.
• Aviation snips: For short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.
• Ergonomic and durable overmoulded grips add comfort and last longer.
• Triple cutting direction identification – on the head, handle and by colour coded handle.
• Thumb and forefinger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.
• Extra long aviation snips: For longer and straighter cuts in one go.
• Offset snips: For long continuous straight or curved cuts. 45° offset keeps users hand away from the cutting material.
• Chrome plated rust protected forged blades for increased lifetime. Extra hardened to 65 HRC.
• Torsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.
• Serrated cutting edges prevent slippage when cutting.
• Flush slimline design for non-snagging in material.

General Information

Socket - Air Impact 1/2"D 52mm Socket - Air Impact 1/2"D 52mm.

• 6pt single Hex
• Manufactured from Chrome Molybdenum
• Size: 52mm
• Impact socket for use with air impact tools

General Information

Cambelt Tool Kit - for VAG Petrol FSI 1.4, 1.6

• Made in Sheffield
• This kit is suitable for use with the following replacement Cam-belt kits INA 530008910, Contitech CT957K1, Gates K025565XS
• Use one belt to transfer the drive across the camshafts depending on the engine specification the cam setting pins may be used with or without the crossbar provided
• A small but essential kit for setting the camshafts and tensioner on the popular 1.4 and 1.6 FSi petrol engines found across the VAG ranges from 1999 to 2008 these engines

• Leak Proof Cylinder
• Welded Carry Handle for Easy Transportation
• Safety Valve to Prevent Overloading
• 60mm Extending Screw
• Adjustable Screw to Change Height
• Welded Base Increasing Stability

• TUV

• 0.5kg Reel
• Pack of 1
• Flux impregnated
• Material : 40% Tin/60% Lead

• Flexible battery system: works with all MILWAUKEE® M12™ batteries
• 90° rotating head allows the user to easily direct the light beam at the desired work area
• Sealed aluminium head is designed for impact- and weather-resistant durability
• The 120 lumen LED light is 2x brighter and whiter than conventional incandescent bulbs
• Magnetic back for hands-free use
• M12™ LED electronics deliver 2x longer run time on a single charge with less heat

General Information

Protective Faceshield Bag. Protective Faceshield Bag

• 8″ adjustable wrench (48227508) has an extra wide jaw of 38 mm for increased jaw capacity in confined environments.
• Permanent lasered inch and mm markings for accurate adjustment
• Ergonomic rounded handle design for a comfortable fit in the hand and less pressure points on the palm.
• Precision adjustment screw with accurate threads and tight tolerances. The jaws won't back off during use.
• Parallel jaws won't slip or damage finish surfaces.
• Slim head design for reaching into tight spaces.
• Chrome plating for best-in-class rust protection and increased durability.
• Lanyard hole.

• 180° swiveling head.
• Provides Extra leverage for tougher bolts.

• Total length (mm): 380

• I-Beam design for added durability.
• All-metal core for improved durability.
• All-chrome shafts for increased durability.
• Comfortable Tri-Lobe handles for better grip.
• Hammer-ready strike cap improves leverage when working in tight spaces.
• Curved claw design reduces damage when pulling nails.

General Information

Star Socket & Bit Set 1/4"D, 3/8"D 23pc

• 23 pc Star Socket Set includes: E4/E5/E6/E7/E8 in 1/4in. drive, E10/E12/E14/E16 in 3/8in. drive and Star Hex shank bits, tamperproof x 30mm - T7/T8/T9/T10/T15/T20/T25/T27/T30/T40/T45/T50/T55 A 3/8in. drive x 5/16in. coupler is included
• Coupler for use with bits
• Supplied in a handy blow mould case
• Bits manufactured from Chrome Molybdenum

• Slim profile head with flush direction lever offers better accessibility.
• 90 tooth design with 4 °of arc swing for tight work spaces.

• Length (mm): 286
• Length (Inch): 11.25

• Flexible material allows for easy install and removal.
• Form-fitting lightweight design protects the tool and work surface while adding minimal size or weight to the tool.
• Use on any other product than advised may result in damage to tool motor and may void tool warranty.
• Not for use on or near live electrical circuits.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.

• Durable grip handle with an anti-slip design.
• Strong steel head prevents chipping on contact.
• I-Beam handle construction resists bending.
• Precise balance for better handling and control.
• SHOCKSHIELD grip reduces peak vibration.

• Switch latch for constant power
• Automatic circuit breaker reset
• Auxiliary ground lead holder

• Voltage Detection Range: Detects low to high AC voltages
• Non-Contact Operation: Ensures safety during electrical testing
• LED Indicators: Provides visual feedback for voltage detection
• Compact Design: Small and lightweight for convenient use
• Frequency Compatibility: Operates at standard electrical frequencies
• Durability: Engineered for regular use with robust construction
• Battery Operated: Powered by alkaline batteries
• Compliance: Meets international electrical safety standards.

General Information

Ratchet Podger Spanner 10mm x 13mm Ratchet Podger Spanner 10mm x 13mm.

• Double sized podger spanner with ratchet mechanism
• Ideal for scaffolding and construction
• High Quality
• Manufactured from Chrome Vanadium

• 15m coil
• Black
• Temp -40C to +70C
• ISO 2398
• Suitable for air & water

• 1 x Universal Joint, 1x Adaptor, 1 x Hex 1/2DR Square , 1 x 150mm extension
• Standard Impact sockets 10,12,13,14,15,17,19,21,22,24mm