Proud to be a UK-based company
Contact usCV Boots
Transmission Sub-Categories
Important compatibility info
| Joint Diameter, up to | 104 mm |
| Title | Stretchy CV Boot Kit |
| Function | Bellow, drive shaft |
| Length 1/ Length 2 | 95/118 mm |
| to shaft diameter | 30 mm |
| for shaft diameter | 21 mm |
| Joint diameter (mm) | 78 mm |
| Type | Bellow, drive shaft |
Additional Information
- Kit contains: CV boot, grease and small & large ear clamps
- Fitment can be done with a conventional cone (NCB9103) or using the pneumatic tool (NCB9101) which can take as little as 20 minutes
- Can be fitted to trilobal/tripod joints (see instructions)
- Fits CV joints measuring: 20-29mm (shaft), 72-96mm (joint), 84-104mm (length)
- Resistant to oil & grease, grit, abrasion, extreme temperature changes and impact damage
- Direct OE replacement
- Superior flexibility reduces wear and tear, particularly when on full turning lock
£8.86
Important compatibility info
| Title | Stretchy Universal CV Boot Kit - Standard |
| Function | Bellow, drive shaft |
| Length 1/ Length 2 | 58/128 mm |
| Joint Diameter, up to | 116 mm |
| Joint diameter (mm) | 56 mm |
| to shaft diameter | 26 mm |
| for shaft diameter | 18 mm |
| Type | Bellow, drive shaft |
Additional Information
- Kit contains: CV boot, grease and small & large ear clamps
- Fitment can be done with a conventional cone (NCB9103) or using the pneumatic tool (NCB9101) which can take as little as 20 minutes
- Can be fitted to trilobal/tripod joints (see instructions)
- Fits most cars as well as some 4x4's and LCV's with CV joints measuring: 18-26mm (shaft), 56-116mm (joint), 58-128mm (length)
- Resistant to oil & grease, grit, abrasion, extreme temperature changes and impact damage
- Superior flexibility reduces wear and tear, particularly when on full turning lock
- Cut to size design allows it to fit most cars – reducing the range required
£8.87
Important compatibility info
| Function | Bellow, drive shaft |
| Inner diameter 2 | 88 mm |
| Inner diameter 1 | 27 mm |
| Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
| Length | 107 mm |
| Material | Thermoplast |
| Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.01
Important compatibility info
| Joint Diameter, up to | 104 mm |
| Function | Bellow, drive shaft |
| for shaft diameter | 21 mm |
| to shaft diameter | 30 mm |
| Length 1/ Length 2 | 95/118 mm |
| Type | Bellow, drive shaft |
| Joint diameter (mm) | 78 mm |
£9.15
Important compatibility info
| to shaft diameter | 26 mm |
| Function | Bellow, drive shaft |
| Length 1/ Length 2 | 58/128 mm |
| Type | Bellow, drive shaft |
| for shaft diameter | 18 mm |
| Joint diameter (mm) | 56 mm |
| Joint Diameter, up to | 116 mm |
£9.15
Important compatibility info
| Inner diameter | 62 mm |
| Material | Rubber |
| Function | Bellow Kit, drive shaft |
| Inner diameter 3 | 74 mm |
| Additional Information | with grease |
| Placement on Vehicle | Front Axle, Rear Axle |
| Outer diameter | 94 mm. 86 mm. 78 mm. 66 mm. 38 mm. 32 mm. 28 mm. 24 mm |
| Length | 130 mm |
| Type | Bellow Kit, drive shaft |
| Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.45
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Wheel Side |
| Length | 59 mm |
| Material | Thermoplast |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 53 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (29821)
- 1x Febi Clamping Clip (100698)
- 1x Febi High Temperature Lubricant (03630)
£10.85
Important compatibility info
| Length | 100 mm |
| Material | Thermoplast |
| Inner diameter 1 | 29 mm |
| Inner diameter 2 | 67 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (38348)
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (45640)
- 1x Febi High Temperature Lubricant (03630)
£11.33
Important compatibility info
| Length | 128 mm |
| Material | Thermoplast |
| Inner diameter 1 | 30 mm |
| Inner diameter 2 | 94 mm |
| Function | Bellow, drive shaft |
| Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.06
Important compatibility info
| Extra Description | Trilobe |
| Function | Bellow Kit, drive shaft |
| Length | 85 mm |
| Inner diameter 2 | 69 mm |
| Inner diameter 1 | 23 mm |
| Type | Bellow Kit, drive shaft |
| Additional Information 2 | with clamps |
| Lubrication | with grease lubrication |
£12.58
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Length | 85 mm |
| Extra Description | Trilobe |
| Inner diameter 2 | 69 mm |
| Inner diameter 1 | 23 mm |
| Type | Bellow Kit, drive shaft |
| Lubrication | with grease lubrication |
| Additional Information 2 | with clamps |
£12.58
Important compatibility info
| Length | 126 mm |
| Height | 126 mm |
| Outer diameter | 21 mm. 60 mm. 72 mm. 82 mm. 83 mm |
| Function | Bellow Kit, drive shaft |
| Placement on Vehicle | Front Axle, Rear Axle |
| Material | Rubber |
| Type | Bellow Kit, drive shaft |
| Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Additional Information | with grease |
| Length | 116 mm |
| Material | Rubber |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 100 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (38364)
- 1x Febi Clamping Clip (38757)
- 1x Febi High Temperature Lubricant (03630)
£12.78
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Length | 59 mm |
| Inner diameter 2 | 57 mm |
| Inner diameter 1 | 28 mm |
| Material | Thermoplast |
| Type | Bellow Kit, drive shaft |
| Lubrication | with grease lubrication |
| Additional Information 2 | with clamps |
£12.82
Important compatibility info
| for shaft diameter | 18 mm |
| to shaft diameter | 34 mm |
| Joint diameter (mm) | 60 mm |
| Function | Bellow, drive shaft |
| Type | Bellow, drive shaft |
| Length 1/ Length 2 | 58/128 mm |
| Joint Diameter, up to | 116 mm |
£13.09
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Length | 59 mm |
| Material | Thermoplast |
| Inner diameter 2 | 57 mm |
| Inner diameter 1 | 28 mm |
| Additional Information 2 | with clamps |
| Type | Bellow Kit, drive shaft |
| Lubrication | with grease lubrication |
£13.26
Important compatibility info
| Inner diameter 1 | 20 mm |
| Inner diameter 2 | 90 mm |
| Function | Bellow Kit, drive shaft |
| Length | 120 mm |
| Type | Bellow Kit, drive shaft |
| Version | Fitting Boot, Universal Cone |
£13.81
Important compatibility info
| Length | 120 mm |
| Type | Bellow Kit, drive shaft |
| Material | Rubber |
| Inner diameter 1 | 25 mm |
| Inner diameter 2 | 90 mm |
| Function | Bellow Kit, drive shaft |
£14.23
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Additional Information 2 | with clamps |
| Length | 125 mm |
| Inner diameter 2 | 86 mm |
| Inner diameter 1 | 25 mm |
| Material | Thermoplast |
| Type | Bellow Kit, drive shaft |
| Lubrication | with grease lubrication |
£14.38
Important compatibility info
| Material | Thermoplast |
| Function | Bellow Kit, drive shaft |
| Length | 125 mm |
| Lubrication | with grease lubrication |
| Additional Information 2 | with clamps |
| Inner diameter 2 | 86 mm |
| Inner diameter 1 | 25 mm |
| Type | Bellow Kit, drive shaft |
£14.38
What is a CV Boot?
A CV boot is a rubber like cover that fits over the CV joint of a drive shaft. These covers are sometimes called bellows as the are often corrugated in shape rather like the bellows of an accordion. They are designed to flex and move with the drive shaft however maintain a watertight seal around the CV joint.
Drive shafts generally have an inner (transmission side) and an outer (wheel side) joint which both need to be covered with a CV boot.
CV boots are made from different flexible materials such as:
Thermoplastic
Rubber
Silicone
Neoprene
What comes in a CV boot?
CV boots can come with different parts depending on the brand and if the part is described as a ‘CV boot’ or as a ‘CV boot kit’.
There are sometimes exceptions to this however nearly all CV boot kits come with clips and grease.
CV boots not listed as kits will often come with the items shown in the image only.
We are happy to let you know which brand provides the clips and grease with their CV boots if this is not clear on the listing.
How do I choose the correct CV boot?
The selection of CV boots for a vehicle is as varied is the number of drive shafts are for the same vehicle.
Some of the factors to consider when selecting the correct replacement CV boots are:
Number of gears (i.e. 5 speed or 6 speed etc)
If you need the inner or outer boot
The diameter of the large and small end of the boot
Manual or automatic transmission
If the vehicle has ABS
Transmission type / transmission code
Vehicle manufacture date (this is not the date the vehicle was registered but the date it was made
Engine number sequence (up to or after as specific number/letter
VIN (chassis number) sequence (up to or after as specific number/letter
What brand of CV boot should I choose?
The replacement costs of a CV boot is relatively small. Much of the expense is centred around the labour cost as fitting these parts can involve removing the drive shaft.
As with most replacement parts budget is a consideration. We would suggest a CV boot that has a long warranty and comes with the additional items that you need to fit them (clips and grease).
How can I tell my CV boot needs replacing?
When a CV boot has failed it is not always immediately obvious. These failures are often detected during an MOT which would lead to a test fail. The failure or split in the CV boot causes the protective grease to escape and water and dirt to replace it. Once the grease escapes it does not take long for the CV joint to fail.
Here are some ways you can tell your CV boot needs replacement:
Grease is sprayed on the inside of your wheel
Clicking sound when turning your vehicle in a circle
There is a split visible in the CV boot material
Vibrations as a result of a failing CV joint
