Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 5.37 kg |
| Shock Absorber Design | Telescopic Shock Absorber |
| Pipe Diameter | 80 mm. 70 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 22 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Min. Length | 292 mm |
| Max. Length | 426 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.11
Important compatibility info
| Weight | 0.116 kg |
| Length | 1138 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.73
Important compatibility info
| Function | Sensor, wheel speed |
| Number of Connectors / Ports | 2 |
| Length | 2650 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Resistance | 1200 Ohm |
| Cable Length | 2500 mm |
| Weight | 0.160 kg |
| Type | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.02
Important compatibility info
| Weight | 12.9 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 625 mm |
| Inner diameter | 17 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Pipe Diameter | 46 mm |
| Mounting points diameter | 17 mm |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.16
Important compatibility info
| Inner diameter | 173 mm |
| Placement on Vehicle | at brake caliper |
| Height | 225 mm |
| Additional Information | with fastening/mounting material |
| Outer diameter | 445 mm |
| Weight | 0.47 kg |
| Type | Cover Sheet, brake drum |
| Function | Cover Sheet, brake drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.14
Important compatibility info
| Weight | 0.045 kg |
| Placement on Vehicle | Left |
| Length | 205 mm |
| Width | 585 mm |
| Material | NBR (nitrile butadiene rubber) |
| Thickness | 40 mm |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.50
Important compatibility info
| Weight | 0.183 kg |
| Joint Type | Tripod Joint |
| Placement on Vehicle | Front Axle, transmission sided |
| Length | 102 mm |
| Material | Thermoplast |
| Inner diameter 1 | 24 mm |
| Inner diameter 2 | 68 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (173235)
- 1x Febi Molybdenum Grease (02582)
£17.39
Important compatibility info
| Weight | 2.56 kg |
| Placement on Vehicle | Rear Axle |
| Width | 40 mm |
| Outer diameter | 228 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Function | Brake Shoe Set |
| Piston Diameter | 22.2 mm |
| Type | Brake Shoe Set |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.01
Important compatibility info
| Weight | 1.250 kg |
| Width | 30 mm |
| Belts | with rounded tooth profile |
| Number of Teeth | 150 |
| Surface | Coated |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
| Units / Pulleys | incl. hydraulic belt tensioner |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (31725)
- 1x Febi Tensioner, timing belt (34610)
- 1x Febi Tensioner Pulley, timing belt (27004)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (26982)
£146.89
Important compatibility info
| Weight | 0.067 kg |
| Placement on Vehicle | Front Axle |
| Material | PU (Polyurethane) |
| Inner diameter | 22 mm |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
| Width | 54 mm |
| Length | 96 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.36
Important compatibility info
| Length | 95 mm |
| Operating Mode | Mechanical |
| Number of Connectors / Ports | 2 |
| Function | Fuel Pump |
| Internal Thread Size | M16 x 1,5 |
| Type | Fuel Pump |
| Weight | 1.575 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£122.18
Important compatibility info
| Weight | 0.050 kg |
| Material | Plastic |
| Opening Pressure | 1 bar |
| for OE number | 1399 820 |
| Type | Cap, coolant tank |
| Function | Cap, coolant tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.94
Important compatibility info
| Additional Information | with rubber mounts, with nuts |
| Weight | 3.31 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 40572 |
| Inner diameter | 14 mm |
| Steering arm type | Control Arm |
| Placement on Vehicle | Left Rear, Lower |
| Material | Cast Steel |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| External Thread Size | M14 x 1,5 |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (36328)
- 1x Febi Bolt, control arm (37661)
- 1x Febi Bolt, control arm (37638)
- 2x Febi Nut (37412)
£74.05
Important compatibility info
| Length | 252 mm |
| Height | 60 mm |
| Width | 204 mm |
| Filter type | Filter Insert |
| Weight | 0.65 kg |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Weight | 0.045 kg |
| Function | Repair Kit, gear shift lever |
| Type | Repair Kit, gear shift lever |
| Placement on Vehicle | at gearshift linkage |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.70
Important compatibility info
| Number of Teeth | 134 |
| Function | Timing Belt Kit |
| Belts | with rounded tooth profile |
| Width | 25.4 mm |
| Weight | 0.900 kg |
| Track rollers material | Plastic |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (11197)
- 1x Febi Tensioner Pulley, timing belt (26715)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (26716)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (178792)
£56.95
Important compatibility info
| Weight | 0.43 kg |
| Filter type | In-Line Filter, with connection for water sensor, with water drain screw |
| Function | Fuel filter |
| Additional Information 2 | with seal ring |
| Height | 128 mm |
| Pipe Diameter | 8 mm |
| Type | Fuel filter |
| Outer diameter | 103 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.15
Important compatibility info
| Number of Chain Links | 142 |
| Function | Timing Chain |
| Chain Type | Simplex, Closed chain |
| Weight | 0.290 kg |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£135.37
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 308 mm |
| Thickness | 65 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 18 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 5 |
| Function | Brake Disc |
| Weight | 7.3 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Hole Spacing | 63 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.14
Important compatibility info
| External Thread Size | M10 x 1,25 |
| Weight | 0.23 kg |
| Placement on Vehicle | Front Axle Left |
| Length | 70 mm |
| Material | Steel |
| Spanner Size | 17 |
| Paired article numbers | 42096 |
| Rod/Strut | Coupling Rod |
| Colour | Black |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.70
Important compatibility info
| Function | Brake Disc |
| Centering Diameter | 56 mm |
| Surface | Oiled |
| Minimum thickness | 7 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Thickness | 69.2 mm |
| Brake Disc Thickness | 9 mm |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 248 mm |
| Rim Hole Number | 4 -Hole |
| Weight | 5.56 kg |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
| Additional Information 2 | with ABS sensor ring, with grease cap |
| Hub external diameter | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.70
Important compatibility info
| Weight | 0.319 kg |
| Number of Connectors / Ports | 2 |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| Additional Information | with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.80
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 9.62 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 300 mm |
| Thickness | 73.6 mm |
| Brake Disc Thickness | 32 mm |
| Minimum thickness | 29.9 mm |
| Bolt Hole Circle Diameter | 130 mm |
| Centering Diameter | 80 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.04
Important compatibility info
| Fulfils ECE norm | R37 |
| Function | Bulb / Bulb, clearance/end outline marker light / Bulb, licence plate light / Bulb, park/position light / Bulb, position/end outline marker light |
| Type | Bulb / Bulb, clearance/end outline marker light / Bulb, licence plate light / Bulb, park/position light / Bulb, position/end outline marker light |
| Weight | 0.006 kg |
| Rated Power | 10 W |
| Bulb Type | R10W, Ball-shaped lamp |
| Voltage | 24 V |
| Base design light bulb | BA15s |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.64
Important compatibility info
| Placement on Vehicle | Front |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 1.643 kg |
| Type | Mounting, engine |
| for OE number | 357 199 279 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.95
Important compatibility info
| Filter type | Activated Carbon Filter |
| Function | Filter Set, cabin air |
| Weight | 0.198 kg |
| Type | Filter Set, cabin air |
| Length | 216.5 mm |
| Height | 22 mm |
| Width | 119 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.49
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 0.286 kg |
| Function | Tie Rod End |
| Length | 60 mm |
| Additional Information 2 | with nut |
| Spanner Size | 19 |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.21
Important compatibility info
| Weight | 0.67 kg |
| Placement on Vehicle | Rear |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 3C0 199 855 M |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Weight | 0.217 kg |
| Function | Hose, air supply |
| Extra Description | febi Plus |
| Type | Hose, air supply |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.52
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 2 |
| Function | EGR Valve |
| Weight | 0.97 kg |
| Type | EGR Valve |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£262.80
Important compatibility info
| Number of Ribs | 8 |
| Function | V-Ribbed Belt |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 2631 mm |
| Weight | 0.290 kg |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.51
Important compatibility info
| Weight | 0.001 kg |
| Length | 71 mm |
| Width | 32 mm |
| Type | Gasket, oil outlet (charger) |
| Function | Gasket, oil outlet (charger) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.93
Important compatibility info
| Weight | 0.570 kg |
| Placement on Vehicle | Front Axle Left, Outer |
| Paired article numbers | 01854 |
| Thread Type | with right-hand thread |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| External Thread Size | M14 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.34
Important compatibility info
| Opening Temperature | 88 °C |
| Function | Thermostat Housing |
| Number of Connectors / Ports | 2 |
| Weight | 0.30 kg |
| Type | Thermostat Housing |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.25
Important compatibility info
| Number of Connectors / Ports | 3 |
| Ignition Coil | 4 Spark |
| Function | Ignition Coil |
| Weight | 0.9 kg |
| Type | Ignition Coil |
| for OE number | 7648797 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.24
Important compatibility info
| Extra Description | febi Plus |
| for OE number | 03C 145 710 D |
| Weight | 0.2 kg |
| Function | Divert-air Valve, charger |
| Type | Divert-air Valve, charger |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.62
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Length | 133 mm |
| Material | Steel |
| Paired article numbers | 48002 |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Front Axle Right |
| Outer diameter | 12 mm |
| Spanner Size | 18 |
| External Thread Size | M12 x 1,5 |
| Additional Information | with nuts |
| Weight | 0.528 kg |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.77
Important compatibility info
| Additional Information 2 | with spacer plate |
| Weight | 3.70 kg |
| Internal Thread Size | M16 x 1,5, M26 x 1,5 |
| Type | Cylinder Head, air compressor |
| Function | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£208.39
Important compatibility info
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Length | 236 mm |
| Material | Thermoplast |
| Additional Information 2 | with clamps |
| Inner diameter 1 | 15 mm |
| Inner diameter 2 | 66 mm |
| Weight | 0.97 kg |
| Type | Bellow Kit, steering |
| Function | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.48
Important compatibility info
| Placement on Vehicle | transmission sided |
| Material | PTFE (polytetrafluoroethylene) |
| Inner diameter | 85 mm |
| Function | Shaft Seal, crankshaft |
| Weight | 0.22 kg |
| Type | Shaft Seal, crankshaft |
| Additional Information 2 | with flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.61
Important compatibility info
| Function | Brake Hose |
| Type | Brake Hose |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 516 mm |
| Weight | 0.130 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.00
Important compatibility info
| Weight | 0.042 kg |
| Material | NBR (nitrile butadiene rubber) |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
| for OE number | 03L 103 483 H |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.91
Important compatibility info
| Function | Expansion Tank, coolant |
| Number of Connectors / Ports | 2 |
| Additional Information | with coolant level sensor |
| Weight | 0.670 kg |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Expansion Tank, coolant (48390)
- 1x Febi Sensor, coolant level (37648)
£37.42
Important compatibility info
| Function | Thermostat, coolant |
| Opening Temperature | 92 °C |
| Number of Connectors / Ports | 2 |
| Material | Aluminium, Plastic |
| Weight | 0.56 kg |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.72
Important compatibility info
| Weight | 3.69 kg |
| Number of Connectors / Ports | 5 |
| Function | EGR Module |
| for OE number | 03L 131 512 DM S1 |
| Type | EGR Module |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£454.86
Important compatibility info
| Weight | 0.4 kg |
| Housing length | 337.5 mm |
| Placement on Vehicle | Left Front |
| Length | 610 mm |
| Housing Diameter | 18 mm |
| Eject Force | 260 N |
| Stroke | 250 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, front panel |
| Type | Gas Spring, front panel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.70
Important compatibility info
| Additional Information | with gaskets/seals |
| Weight | 2.58 kg |
| Type | Seal Kit, multi-valve |
| Function | Seal Kit, multi-valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£145.27
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Weight | 0.296 kg |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (188443)
- 2x Febi Protective Cap/Bellow, shock absorber (192650)
£31.52
Important compatibility info
| Weight | 0.29 kg |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (10087)
- 1x Febi Rolling Bearing, suspension strut support mount (10091)
£26.09
Important compatibility info
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 21681 |
| Placement on Vehicle | Front Axle Right, Lower |
| Weight | 4.300 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Replaces | 22460 |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023