Important compatibility info
Weight | 0.565 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 317 mm |
Function | Inner Tie Rod |
Additional Information | with counter nut |
External Thread Size | M12 x 1,5 |
Internal Thread Size | M14 x 1,5 |
Extra Description | ProKit |
Type | Inner Tie Rod |
Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (44436)
- 1x Febi Clamping Clip (38754)
- 1x Febi Clamping Clip (38762)
Important compatibility info
Brake caliper piston diameter | 38 mm |
Function | Brake Caliper |
Type | Brake Caliper |
Weight | 1.450 kg |
Paired article numbers | 181146 |
Placement on Vehicle | Rear Axle Right |
Material | Cast Aluminium |
Brake Caliper Type | Brake Caliper (1 piston) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 286 mm |
Outer diameter | 98 mm |
Number of Teeth | 26 |
Screw length below head | 234 mm |
Placement on Vehicle | Front Axle Left |
Function | Brake Shaft, drum brake |
Type | Brake Shaft, drum brake |
Paired article numbers | 181573 |
Extra Description | febi Plus |
Weight | 3.5 kg |
Shape/Form | S Shape |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.08 kg |
Function | Thermostat, coolant |
Opening Temperature | 88 °C |
Type | Thermostat, coolant |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Engine Management | Timing Chain |
Function | Guide, timing chain |
Weight | 0.02 kg |
for OE number | 102 052 03 16 |
Shape/Form | Short |
Placement on Vehicle | Lower |
Type | Guide, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.812 kg |
Additional Information | with gasket/seal |
Material | Cast Aluminium |
Number of Wings | 7 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 5 -Hole |
Placement on Vehicle | Rear Axle |
Outer diameter | 294 mm |
Thickness | 55 mm |
Brake Disc Thickness | 19 mm |
Minimum thickness | 17.4 mm |
Bolt Hole Circle Diameter | 120 mm |
Centering Diameter | 75 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Type | Brake Disc Rotor |
Weight | 5.966 kg |
Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.657 kg |
Type | Mounting Kit, charger |
Function | Mounting Kit, charger |
for OE number | 161 253 115 S2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.09 kg |
Internal Thread Size | M10 x 1 |
External Thread Size | M10 x 1 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 313 mm |
Spanner Size | 14 |
Function | Brake Hose |
Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.5 kg |
Rotor Style | Solid |
Rim Hole Number | 4 -Hole |
Placement on Vehicle | Front Axle |
Outer diameter | 234 mm |
Thickness | 45 mm |
Brake Disc Thickness | 12 mm |
Minimum thickness | 10 mm |
Bolt Hole Circle Diameter | 100 mm |
Centering Diameter | 59 mm |
Surface | Coated |
Function | Brake Disc |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 193433 |
Weight | 5.2 kg |
Placement on Vehicle | Front Axle Right |
Width | 65 mm |
Outer diameter | 100 mm |
Inner diameter | 29 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Rubber/Metal |
Weight | 0.468 kg |
Type | Repair Kit, suspension strut support mount |
Function | Repair Kit, suspension strut support mount |
Extra Description | ProKit |
Additional Information 2 | with fastening material, without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (109124)
- 1x Febi Nut (174011)
- 3x Febi Screw (172806)
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 192 mm |
Material | Thermoplastic polyester elastomer |
Additional Information 2 | with clamps |
Inner diameter 1 | 14 mm |
Inner diameter 2 | 46 mm |
Weight | 0.060 kg |
Type | Bellow Kit, steering |
Function | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness/Strength 1 | 14.9 mm |
Weight | 1.270 kg |
Inspection Tag | ECE R90 Approved |
Placement on Vehicle | Rear Axle |
Length | 112.7 mm |
Width | 60.6 mm |
Function | Brake Pad Set, disc brake |
Wear Warning Contact | with acoustic wear warning |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 285 mm |
Diameter | 1 mm |
Thickness | 41 mm |
Rod/Strut | Coupling Rod |
Weight | 2.730 kg |
Pipe Diameter | 36 mm |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.211 kg |
for OE number | 038 103 469 AD |
Heating / Cooling | with jiggle pin |
Type | Cylinder Head Cover |
Extra Description | febi Plus |
Function | Cylinder Head Cover |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 74 20 981 959 |
Additional Information 2 | with seal ring |
Number of Connectors / Ports | 2 |
Weight | 0.66 kg |
Type | Sender Unit, fuel tank |
Function | Sender Unit, fuel tank |
Screw length below head | 600 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.341 kg |
Placement on Vehicle | Front Axle |
Length | 140.2 mm. 141.4 mm |
Width | 47.6 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 16.5 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.410 kg |
Placement on Vehicle | Front Axle |
Length | 117.5 mm |
Width | 58.6 mm |
Wear Warning Contact | excl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.4 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gas Spring, boot/cargo area |
Housing length | 216.5 mm |
Type | Gas Spring, boot/cargo area |
Piston conrod diameter | 8 mm |
Mounting points diameter | 16.5 mm |
Eject Force | 580 N |
Stroke | 107 mm |
Housing Diameter | 19 mm |
Weight | 0.3 kg |
Length | 516 mm |
Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 66.6 mm |
Placement on Vehicle | Rear Axle |
Length | 169.2 mm |
Inspection Tag | ECE R90 Approved |
Weight | 2.499 kg |
Thickness/Strength 1 | 20.5 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.07 kg |
Placement on Vehicle | Front Axle, inner |
Length | 50 mm |
Width | 40 mm |
Material | Rubber/Metal |
Thickness | 43 mm |
Inner diameter | 23 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.36 kg |
Pipe Diameter | 9 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 238 mm |
Material | Steel |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M12 x 1,25 |
Extra Description | ProKit |
Additional Information | with nuts |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.476 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Cone Size | 19 mm |
Function | Ball Joint |
Type | Ball Joint |
Additional Information | with fastening/mounting material |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Length | 266 mm. 336 mm |
Material | Steel |
Thickness | 69 mm |
Spanner Size | 17 |
Paired article numbers | 07259 |
Thread Length | 19 mm |
Function | Tie Rod |
Weight | 0.92 kg |
Replaces | 07259 |
Extra Description | ProKit |
Type | Tie Rod |
Adjustable | Adjustable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.045 kg |
Placement on Vehicle | Front Axle |
Length | 73 mm |
Material | PU (Polyurethane) |
Function | Rubber Buffer, suspension |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with lock nut |
Placement on Vehicle | Front Axle Left, Lower |
Steering arm type | Control Arm |
Paired article numbers | 37196 |
Material | Sheet Steel |
Function | Control/Trailing Arm, wheel suspension |
Weight | 2.563 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (27530)
- 1x Febi Ball Joint (19406)
- 1x Febi Securing Plate, ball joint (14252)
- 3x Febi Clamping Bolt, ball joint (07866)
Important compatibility info
Weight | 0.22 kg |
Function | Cover, timing belt |
Type | Cover, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.079 kg |
Placement on Vehicle | Rear Axle |
Material | PU (Polyurethane) |
Function | Rubber Buffer, suspension |
Thickness | 133 mm |
Shape/Form | Round |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.717 kg |
Placement on Vehicle | Right Rear |
Length | 313 mm |
Paired article numbers | 24709 |
Housing Diameter | 35 mm |
Eject Force | 1400 N |
Stroke | 76 mm |
Mounting points diameter | 15.5 mm |
Piston conrod diameter | 10 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 192.5 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023