Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 2.385 kg |
| Piston Diameter | 22 mm |
| Placement on Vehicle | Rear Axle |
| Width | 32 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Inner Brake Drum Diameter | 200 mm |
| Function | Brake Shoe Set |
| Type | Brake Shoe Set |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
| Outer diameter | 202.52 mm |
| Thickness/Strength 1 | 6.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| Weight | 11.0 kg |
| Placement on Vehicle | Front Axle |
| Length | 993 mm |
| Outer diameter | 50 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| External Thread Size | M22 x 1,5 |
| Additional Information 2 | with lid, with cap |
| Function | Tensioner, timing chain |
| Weight | 0.165 kg |
| Type | Tensioner, timing chain |
| Operating Mode | Hydraulic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1340 mm |
| Rod/Strut | Push Rod |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 |
| External Thread Size | M20 x 1,5 |
| Cone Size | 26 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 40 mm |
| Weight | 13.6 kg |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Function | Interior Blower |
| Type | Interior Blower |
| Weight | 1.39 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.91
Important compatibility info
| Function | Camshaft |
| Weight | 2.325 kg |
| Type | Camshaft |
| for OE number | 028 109 101 E |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.91
Important compatibility info
| Material | Rubber/Metal |
| Outer diameter | 160 mm |
| Thickness | 46 mm |
| Inner diameter | 70 mm |
| Number of Holes | 8 |
| Bolt Hole Circle Diameter | 12 mm |
| Weight | 0.88 kg |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.94
Important compatibility info
| Weight | 3.560 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Inner diameter | 31 mm. 58 mm |
| Bolt Hole Circle Diameter | 64 mm |
| Number of Connectors / Ports | 2 |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Width | 137 mm |
| Outer diameter | 137 mm |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.96
Important compatibility info
| Weight | 0.414 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 152 |
| Timing Chain Size | G53HR |
| Type | Timing Chain |
| Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.98
Important compatibility info
| Placement on Vehicle | Right |
| Weight | 1.370 kg |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.98
Important compatibility info
| Function | Mounting, engine |
| Width | 250 mm |
| Placement on Vehicle | Rear, both sides |
| Weight | 4.780 kg |
| Internal Thread Size | M20 x 2,5 |
| Hole Spacing | 200 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.99
Important compatibility info
| Placement on Vehicle | Front Axle |
| Spanner Size | 36 |
| Extra Description | ProKit |
| Function | Centre Rod Assembly |
| Pipe Diameter | 42 mm |
| Type | Centre Rod Assembly |
| Thread Size | M24 x 1,5 |
| Length | 775 mm |
| Rod/Strut | Push Rod |
| Weight | 7.330 kg |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.05
Important compatibility info
| Length | 110 mm |
| Width | 75 mm |
| Thickness | 51 mm |
| Number of Connectors / Ports | 4 |
| Weight | 0.119 kg |
| Function | Relay, glow plug system |
| Type | Relay, glow plug system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.07
Important compatibility info
| Material | Plastic |
| Additional Information 2 | with lid |
| Weight | 2.28 kg |
| Opening Pressure | 1.0 bar |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.09
Important compatibility info
| Colour | Black |
| Number of Connectors / Ports | 20 |
| Combi Switch Function | with indicator function, with rear wipe-wash function, with wipe-wash function, with high beam function, with headlight flasher |
| Function | Steering Column Switch |
| Weight | 0.3 kg |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.10
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 2.040 kg |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.26
Important compatibility info
| Weight | 2.36 kg |
| Placement on Vehicle | Front Axle Right, Front |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 41072 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.26
Important compatibility info
| Weight | 0.861 kg |
| Outer diameter | 180 mm |
| Bolt Hole Circle Diameter | 147 mm |
| Parameter | VL121R |
| Function | Clutch, radiator fan |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.27
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 986 mm |
| Rod/Strut | Push Rod |
| Weight | 9.260 kg |
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.30
Important compatibility info
| Length | 350 mm |
| Number of Connectors / Ports | 2 |
| Function | Interior Blower |
| Weight | 1.718 kg |
| Type | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.32
Important compatibility info
| Weight | 0.126 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 1 359 319 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.37
Important compatibility info
| Weight | 3.433 kg |
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 962 241 11 13 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.37
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Centering Diameter | 79 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Minimum thickness | 22.4 mm |
| Placement on Vehicle | Front Axle |
| Weight | 9.38 kg |
| Thickness | 73.1 mm |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Surface | Coated |
| Number of mounting bores | 1 |
| Rotor Style | Internally Vented |
| Outer diameter | 330 mm |
| Brake Disc Thickness | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.41
Important compatibility info
| Thickness | 76 mm |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 300 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 18.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Weight | 6.8 kg |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.41
Important compatibility info
| Refrigerant | R 134a |
| Type | Condenser, air conditioning |
| Core Length | 451 mm |
| Function | Condenser, air conditioning |
| Core Depth | 16 mm |
| Weight | 2.421 kg |
| Additional Information 2 | with dryer |
| Core Width | 560 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.45
Important compatibility info
| Weight | 1.39 kg |
| Number of Teeth | 87 |
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Water pump impeller material | Metal |
| Units / Pulleys | incl. tensioner pulley |
| Width | 17 mm |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (21249)
- 1x Febi Water Pump, engine cooling (39298)
£88.47
Important compatibility info
| Type | Belt Pulley, alternator |
| Weight | 4.186 kg |
| Inner diameter | 16 mm |
| Outer diameter | 116 mm |
| Function | Belt Pulley, alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.49
Important compatibility info
| Weight | 0.8 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.52
Important compatibility info
| Additional Information 2 | with nut |
| Thread Size | M22x,15 |
| External Teeth, Wheel Side | 26 |
| Weight | 6.142 kg |
| External Teeth, Diff.Side | 25 |
| Min. Length | 896 mm |
| Wheel Sided Joint Diameter | 79.4 mm |
| Transmission-side joint diameter | 75.1 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.54
Important compatibility info
| Weight | 2.2 kg |
| Length | 228 mm |
| Width | 45 mm |
| Outer diameter | 171 mm |
| Inner diameter | 100 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with rolling bearing |
| Hole Spacing | 194 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.57
Important compatibility info
| for OE number | 89465-48110 |
| Spanner Size | 22 |
| Weight | 0.123 kg |
| Cable Length | 800 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.60
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 10.39 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 365 mm |
| Thickness | 48.6 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 22 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.62
Important compatibility info
| Weight | 10.99 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 332 mm |
| Thickness | 62 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.64
Important compatibility info
| Rotor Style | Internally Vented |
| Function | Brake Disc |
| Surface | Coated |
| Bolt Hole Circle Diameter | 112 mm |
| Minimum thickness | 24 mm |
| Brake Disc Thickness | 26 mm |
| Thickness | 59.3 mm |
| Outer diameter | 330 mm |
| Placement on Vehicle | Rear Axle |
| Rim Hole Number | 5 -Hole |
| Weight | 9.683 kg |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.64
Important compatibility info
| Weight | 2.070 kg |
| for OE number | 11 21 076 73R |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.66
Important compatibility info
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Weight | 4.600 kg |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Mounting bores distance | 58 mm |
| Max. Length | 554 mm |
| Min. Length | 372 mm |
| Pipe Diameter | 51 mm |
| Piston conrod diameter | 22 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.66
Important compatibility info
| Weight | 9.5 kg |
| External Thread Size | M12 x 1,5, M20 x 1,5 |
| Outer diameter | 228 mm. 258 mm |
| Thickness | 180 mm. 525 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.67
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.500 kg |
| Shock Absorber Mounting Type | Bottom eye, Top pin |
| Max. Length | 397 mm |
| Min. Length | 256 mm |
| Pipe Diameter | 53 mm. 45 mm |
| Piston conrod diameter | 12.5 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.68
Important compatibility info
| Weight | 1.64 kg |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 410 mm |
| Min. Length | 272 mm |
| Pipe Diameter | 57 mm. 45 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 12 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.68
Important compatibility info
| Weight | 3.28 kg |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 690 mm |
| Min. Length | 410 mm |
| Pipe Diameter | 70 mm. 61 mm |
| Mounting points diameter | 45 mm |
| Piston conrod diameter | 17 mm |
| Function | Shock Absorber |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.68
Important compatibility info
| Weight | 2.07 kg |
| Mounting points diameter | 16 mm |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Max. Length | 565 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Min. Length | 349 mm |
| Pipe Diameter | 45 mm. 54 mm |
| Function | Shock Absorber |
| Piston conrod diameter | 15 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.68
Important compatibility info
| Bolt Hole Circle Diameter | 112 mm |
| Type | Brake Disc Rotor |
| Surface | Coated |
| Weight | 8.4 kg |
| Rotor Style | Vented |
| Minimum thickness | 21.5 mm |
| Rim Hole Number | 5 -Hole |
| Centering Diameter | 65 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 330 mm |
| Thickness | 50 mm |
| Number of mounting bores | 1 |
| Brake Disc Thickness | 23 mm |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.79
Important compatibility info
| Placement on Vehicle | Upper |
| Weight | 0.971 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 174 |
| Timing Chain Size | G68HRF-5 |
| Type | Timing Chain |
| Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.79
Important compatibility info
| Type | Timing Chain Kit |
| Number of Chain Links | 94 |
| Chain Type | Simplex, Closed chain |
| Function | Timing Chain Kit |
| Weight | 0.617 kg |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (44294)
- 1x Febi Tensioner, timing chain (178328)
- 1x Febi Guide, timing chain (177314)
- 1x Febi Guide, timing chain (179206)
£88.85
Important compatibility info
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Placement on Vehicle | Intake Side |
| Weight | 0.874 kg |
| Number of Teeth | 42 |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.85
Important compatibility info
| Transmission-side joint diameter | 75.8 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 83 mm |
| Weight | 7.608 kg |
| External Teeth, Wheel Side | 29 |
| Paired article numbers | 184707 |
| Thread Size | M24x1,5 |
| Additional Information 2 | with nut |
| Additional Information | with Split Pin |
| Placement on Vehicle | Front Axle Right |
| External Teeth, Diff.Side | 26 |
| Min. Length | 941 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.85
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 11 |
| Rated Power | 1.2 kW |
| Weight | 4.8 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.85
Important compatibility info
| Rated Power | 1.7 kW |
| Weight | 3.76 kg |
| Number of Teeth | 10 |
| Type | Starter |
| Voltage | 12 V |
| Function | Starter |
| for OE number | 02E 911 023 HX |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.85
Important compatibility info
| Function | Steering Column Switch |
| Number of Connectors / Ports | 15 |
| Combi Switch Function | with indicator function, with high beam function, with light dimmer function, with fog-lamp function, with rear fog light function, with klaxon |
| Type | Steering Column Switch |
| Weight | 0.174 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.85
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 27 |
| Weight | 5.561 kg |
| External Teeth, Diff.Side | 23 |
| Min. Length | 655 mm |
| Wheel Sided Joint Diameter | 82.4 mm |
| Transmission-side joint diameter | 75 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.85
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023