Important compatibility info
Length | 114 mm |
External Teeth, Wheel Side | 36 |
Function | Joint Kit, drive shaft |
Seal Diameter | 50.8 mm |
Type | Joint Kit, drive shaft |
Internal Teeth, wheel side | 30 |
Thread Size | M16X1.5 |
Additional Information 2 | with groove |
Important compatibility info
Number of mounting bores | 3 |
Mounting Type | Bolted |
Number of Rivet Holes | 3 |
Version | Fitting Kit |
Thread Measurement 1 | M12x1.5 |
Bore Diameter | 8.5 mm |
Function | Ball Joint |
Type | Ball Joint |
Steering arm type | for control arm |
Bore Diameter 1 | 14.9 mm |
Important compatibility info
Material | Thermoplast |
Function | Bellow Kit, steering |
Length | 205 mm |
Inner diameter 1 | 15 mm |
Inner diameter 2 | 48 mm |
Type | Bellow Kit, steering |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Replaces | BSG3268 |
Additional Information 2 | with clamps |
Important compatibility info
Additional Information 2 | with ball joint |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6876 |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5617)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6009)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6053)
Important compatibility info
Outer diameter 2 | 72 mm |
Bearing Code | Gen 2 |
Additional Information 2 | with integrated ABS sensor |
Inner diameter 1 | 27 mm |
Outer diameter 1 | 126 mm |
Width 1 | 82 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Tightening Torque | 50 Nm |
Important compatibility info
Number of mounting bores | 3 |
Mounting Type | Bolted |
Number of Rivet Holes | 3 |
Version | Fitting Kit |
Thread Measurement 2 | M10x1.5 |
Thread Measurement 1 | M12x1.5 |
Bore Diameter 1 | 14.9 mm |
Function | Ball Joint |
Type | Ball Joint |
Steering arm type | for control arm |
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Inner diameter | 14 mm |
Height | 13 mm |
Function | Rolling Bearing, suspension strut support mount |
Outer diameter | 45 mm |
Type | Rolling Bearing, suspension strut support mount |
Important compatibility info
Overall Height | 59 mm |
Function | Brake Drum |
Number of Holes | 5 |
Inner Brake Drum Height | 51 mm |
Br. Drum outer diameter | 240 mm |
Type | Brake Drum |
Inner Brake Drum Diameter | 200 mm |
Placement on Vehicle | Rear Axle |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Additional Information 2 | with ball joint |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6875 |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5618)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6009)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6053)
Important compatibility info
Only in connection with | BHN224, FHN224 |
Bearing Code | Gen 2 |
Additional Information 2 | with integrated ABS sensor |
Outer diameter 1 | 120 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Inner diameter 1 | 28 mm |
Width 1 | 67 mm |
Tightening Torque | 70 Nm |
Important compatibility info
Function | Accessory Kit, disc brake pad |
Type | Accessory Kit, disc brake pad |
Important compatibility info
Function | Slave Cylinder, clutch |
Inner diameter | 19.05 mm |
Material | Aluminium |
Type | Slave Cylinder, clutch |
Important compatibility info
Height 1 | 55 mm |
Width | 54 mm |
Housing Type | without housing |
Opening Temperature | 87 °C |
Height | 55 mm |
Additional Information | with gaskets/seals |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Additional Information
- 1x Borg & Beck Thermostat, coolant (BTS193.87)
Important compatibility info
Thread Measurement 2 | M10X1.5 |
Thread Size | M10X1.5 |
Length | 270 mm |
Material | Cast Steel |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Important compatibility info
Number of Teeth | 28 |
Number of Parts | 3 -part |
Hub Profile | 22.1 x 20.3 |
Outer diameter | 215 mm |
Function | Clutch Kit |
Type | Clutch Kit |
Important compatibility info
Paired article numbers | BFC1003 |
Length | 248 mm |
Height | 30 mm |
Width | 216 mm |
Filter type | Activated Carbon Filter |
Function | Filter, cabin air |
Type | Filter, cabin air |
Important compatibility info
Function | Coolant Flange |
Type | Coolant Flange |
Important compatibility info
Function | Bellow Kit, drive shaft |
Lubrication | with grease lubrication |
Additional Information 2 | with clamps |
Material | Thermoplast |
Length | 115 mm |
Inner diameter 2 | 87 mm |
Inner diameter 1 | 26 mm |
Type | Bellow Kit, drive shaft |
Important compatibility info
Material | Cast Steel |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Placement on Vehicle | Front Axle Left, Front Axle Right |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023