Proud to be a UK-based company
Contact us
Important compatibility info
| Filter type | Filter Insert, without water separator |
| Function | Fuel filter |
| Outer diameter | 90 mm |
| Height | 135 mm |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.68
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Lower |
| Function | Holder, engine mounting system |
| Type | Holder, engine mounting system |
| Replaces | 22760; 22764; 38529 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.70
Important compatibility info
| Length | 126 mm |
| Height | 126 mm |
| Outer diameter | 21 mm. 60 mm. 72 mm. 82 mm. 83 mm |
| Function | Bellow Kit, drive shaft |
| Placement on Vehicle | Front Axle, Rear Axle |
| Material | Rubber |
| Type | Bellow Kit, drive shaft |
| Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Pipe Diameter | 12 mm |
| Thread Length | 34 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 96 mm |
| Outer diameter | 33.5 mm |
| Inner diameter | 10 mm |
| Rod/Strut | Coupling Rod |
| Additional Information | with nuts |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,5 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with screw |
| Material | Steel |
Additional Information
Technical Information
The old bolt / nut must be replaced after every disassembly
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (29459)
- 1x Febi Screw (29460)
- 2x Febi Nut (22263)
£13.00
Important compatibility info
| Length | 215 mm |
| Additional Information | with temperature sensor |
| Thickness | 15 mm |
| Number of Connectors / Ports | 4 |
| Function | RPM Sensor, automatic transmission |
| Type | RPM Sensor, automatic transmission |
| Fitting Depth | 55 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.57
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Material | PU (Polyurethane), Plastic |
| Width | 80 mm |
| Length | 200 mm |
| Placement on Vehicle | Front Axle |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (36006)
- 2x Febi Rubber Buffer, suspension (30421)
£13.63
Important compatibility info
| Function | Tie Rod End |
| Placement on Vehicle | Front Axle Right |
| Length | 112 mm |
| Paired article numbers | 101410 |
| Internal Thread Size | M16 x 1,5 |
| Additional Information | with lock nut |
| External Thread Size | M12 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.66
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 112 mm |
| Paired article numbers | 101409 |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.66
Important compatibility info
| Length | 311 mm |
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information | with counter nut |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.74
Important compatibility info
| Outer diameter | 91 mm |
| Placement on Vehicle | Upper |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Holder, engine mounting system |
| Replaces | 22768; 32167; 38525 |
| Type | Holder, engine mounting system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.15
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
| for OE number | 03L 103 483 C |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.21
Important compatibility info
| Length | 48 mm |
| Width | 70 mm |
| Number of Connectors / Ports | 3 |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.55
Important compatibility info
| Type | Washer Fluid Jet, window cleaning |
| Wash Nozzle Type | Heated |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Front, both sides |
| Function | Washer Fluid Jet, window cleaning |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.71
Important compatibility info
| Length | 107 mm |
| Material | Thermoplast |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 71 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Placement on Vehicle | transmission sided, Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100400)
- 1x Febi Clamping Clip (29816)
- 1x Febi Clamping Clip (45644)
- 1x Febi High Temperature Lubricant (03630)
£14.80
Important compatibility info
| Length | 200 mm |
| Outer diameter | 88 mm |
| Spanner Size | 32 |
| Tightening Torque | 25 Nm |
| Type | Cap, oil filter housing |
| Function | Cap, oil filter housing |
| Extra Description | febi Plus |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.13
Important compatibility info
| Colour | Black |
| Number of Connectors / Ports | 2 |
| Function | Sensor, coolant temperature |
| Type | Sensor, coolant temperature |
| Additional Information 2 | with seal ring |
| for OE number | 059 919 523 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.23
Important compatibility info
| Material | Rubber |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Height | 205 mm |
| Inner diameter | 48 mm |
| Inner diameter 1 | 11 mm. 18 mm. 26 mm. 38 mm. 45 mm |
| Inner diameter 2 | 36 mm. 44 mm. 50 mm. 57 mm |
| Function | Bellow Kit, steering |
| Type | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.47
Important compatibility info
| Function | Hydraulic Filter, automatic transmission |
| Type | Hydraulic Filter, automatic transmission |
| Width | 165 mm |
| Height | 65 mm |
| Length | 235 mm |
| Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.58
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Outer diameter | 102.7 mm |
| Inner diameter | 72.4 mm |
| Function | Rolling Bearing, suspension strut support mount |
| Type | Rolling Bearing, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Type | Urea Hose |
| Hose Length | 1272 mm |
| Function | Urea Hose |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.23
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023