Proud to be a UK-based company
Contact us
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Function | Gasket, cylinder head cover |
| Placement on Vehicle | Right |
| Weight | 0.080 kg |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.00
Important compatibility info
| Material | Plastic |
| Extra Description | febi Plus |
| Function | Door Handle, interior equipment |
| Surface | Chromed |
| Type | Door Handle, interior equipment |
| Placement on Vehicle | Left, Front, Rear |
| Paired article numbers | 175465 |
| Weight | 0.10 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.01
Important compatibility info
| Placement on Vehicle | Lower Right |
| Operating Mode | Manual |
| Function | Roller Guide, sliding door |
| Extra Description | febi Plus |
| Weight | 0.4 kg |
| Type | Roller Guide, sliding door |
| Paired article numbers | 197669 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.01
Important compatibility info
| Weight | 0.915 kg |
| Additional Information | with counter nut |
| Function | Tie Rod End |
| Paired article numbers | 170080 |
| Placement on Vehicle | Front Axle Right |
| Length | 195 mm |
| Spanner Size | 21 |
| Extra Description | ProKit |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M14 x 1,5 |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.01
Important compatibility info
| Weight | 0.29 kg |
| Length | 115 mm |
| Material | Thermoplast |
| Inner diameter 1 | 29 mm |
| Inner diameter 2 | 97 mm |
| Function | Bellow Kit, drive shaft |
| Additional Information | with grease |
| Additional Information 2 | with clamps, with nut |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Nut, kingpin (08023)
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (45645)
£19.01
Important compatibility info
| Weight | 0.52 kg |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Outer diameter | 109 mm |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
| Inner diameter | 13 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.01
Important compatibility info
| Weight | 0.400 kg |
| Placement on Vehicle | Front Axle |
| Length | 72 mm |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with bolts/screws |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Link/Coupling Rod, stabiliser bar (21749)
- 2x Febi Bushing, stabiliser coupling rod (21748)
- 2x Febi Fastening Bolt, stabiliser bar (21747)
- 2x Febi Nut (05360)
£19.01
Important compatibility info
| Weight | 0.9 kg |
| Placement on Vehicle | Left Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.01
Important compatibility info
| Weight | 0.329 kg |
| Length | 2000 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 9 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.01
Important compatibility info
| Weight | 0.260 kg |
| Length | 1446 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 10 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.01
Important compatibility info
| Placement on Vehicle | Front Axle Right, Wheel Side, Front Axle Left |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 22 |
| Internal Teeth, wheel side | 27 |
| Weight | 1.526 kg |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.01
Important compatibility info
| Weight | 0.768 kg |
| Width | 40 mm |
| Outer diameter | 74 mm |
| Inner diameter | 40 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with retaining ring |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Nut, ball joint (21884)
- 1x Febi Nut (14392)
- 1x Febi Nut, kingpin (08023)
- 1x Febi Nut (11435)
£19.01
Important compatibility info
| Function | Tie Rod End |
| Weight | 0.532 kg |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
| Spanner Size | 22 |
| Paired article numbers | 183068 |
| Placement on Vehicle | Front Axle Right |
| Cone Size 2 | 15 mm |
| Cone Size 1 | 13 mm |
| External Thread Size | M10 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.01
Important compatibility info
| Weight | 0.465 kg |
| Function | Repair Kit, brake camshaft |
| Type | Repair Kit, brake camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Seal, brake shaft (18184)
- 1x Febi Shaft Seal, brake camshaft (18186)
- 3x Febi Spacer, brake shaft (18171)
- 1x Febi Brake Shaft, drum brake (18212)
- 1x Febi Brake Shaft, drum brake (18213)
- 1x Febi Spacer, brake shaft (18188)
- 1x Febi Washer (04957)
- 1x Febi Warning Contact, brake pad wear (09217)
£19.01
Important compatibility info
| Placement on Vehicle | Front Axle, Wheel Side |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 25 |
| Internal Teeth, wheel side | 22 |
| Function | Joint Kit, drive shaft |
| Weight | 1.696 kg |
| Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.01
Important compatibility info
| Extra Description | febi Plus |
| Function | Washer Fluid Jet, headlight cleaning |
| Placement on Vehicle | Left |
| Paired article numbers | 173733 |
| Type | Washer Fluid Jet, headlight cleaning |
| Weight | 0.135 kg |
| Additional Information | with lift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.01
Important compatibility info
| Function | Gasket, oil sump |
| Type | Gasket, oil sump |
| Weight | 0.019 kg |
| Seal Material | ACM (Polyacrylate) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.01
Important compatibility info
| Weight | 0.44 kg |
| Placement on Vehicle | Left Rear |
| Outer diameter | 72 mm |
| Thickness | 62 mm |
| Inner diameter | 11 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, manual transmission |
| Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.01
Important compatibility info
| Weight | 0.34 kg |
| Length | 423 mm |
| Height | 48 mm |
| Width | 200 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Additional Information 2 | with pre-filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.01
Important compatibility info
| Function | Washer Fluid Jet, headlight cleaning |
| Extra Description | febi Plus |
| Paired article numbers | 173711 |
| Type | Washer Fluid Jet, headlight cleaning |
| Weight | 0.135 kg |
| Placement on Vehicle | Right |
| Additional Information | with lift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.01
Important compatibility info
| Material | Rubber/Metal, PU (Polyurethane) |
| Suspension | for vehicles with electronic suspension control |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 0.249 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.02
Important compatibility info
| Weight | 0.400 kg |
| Placement on Vehicle | Rear Axle Lower |
| Length | 86 mm |
| Material | Rubber/Metal |
| Outer diameter | 57 mm |
| Inner diameter | 19 mm |
| Steering arm type | for trailing arm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.02
Important compatibility info
| Thread Length | 27 mm |
| Placement on Vehicle | Front Axle Right |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,5 |
| Diameter | 1 mm |
| Material | Steel |
| Additional Information | with nuts |
| Length | 347 mm |
| Rod/Strut | Coupling Rod |
| Paired article numbers | 180456 |
| Spanner Size | 19 |
| Type | Link/Coupling Rod, stabiliser bar |
| Weight | 0.476 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.02
Important compatibility info
| Number of Poles | 7 -pin connector. 13 -pin connector |
| Weight | 0.157 kg |
| Trailer Hitch | from 7-pin to 13-pin |
| Type | Socket Adapter |
| Function | Socket Adapter |
| Voltage | 12 V |
| DIN / ISO | 11446, 1724 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.02
Important compatibility info
| Type | Switch, reverse light |
| Function | Switch, reverse light |
| Transmission Type | Manual Transmission |
| Number of Connectors / Ports | 3 |
| Weight | 0.02 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.02
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 0.432 kg |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.03
Important compatibility info
| Weight | 0.06 kg |
| Function | Thermostat, oil cooling |
| Opening Temperature | 80 °C |
| Type | Thermostat, oil cooling |
| Additional Information | with seal rings |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.03
Important compatibility info
| Thickness | 86 mm. 80 mm |
| Outer diameter | 78 mm |
| Weight | 0.410 kg |
| Inner diameter | 16 mm |
| Paired article numbers | 26507 |
| Function | Bushing, axle beam |
| Material | Rubber/Metal, Aluminium |
| Placement on Vehicle | Rear Axle Left, Front, Rear Axle Right |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.03
Important compatibility info
| Function | Gasket, cylinder head cover |
| Weight | 0.090 kg |
| Type | Gasket, cylinder head cover |
| for OE number | 22441-2B000 |
| Seal Material | NBR (nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.03
Important compatibility info
| Weight | 0.050 kg |
| Hose Length | 100 mm |
| Material | Rubber |
| Outer diameter | 24 mm. 20 mm |
| Inner diameter | 16.5 mm. 12.8 mm |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| for OE number | 102 094 19 87 |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.03
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Joint Type | CV Joint |
| Weight | 0.216 kg |
| Inner diameter 1 | 31 mm |
| Inner diameter 2 | 101 mm |
| Material | Thermoplast |
| Length | 136 mm |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (175669)
- 1x Febi Molybdenum Grease (02582)
£19.03
Important compatibility info
| Weight | 0.223 kg |
| Placement on Vehicle | both sides |
| Length | 475 mm |
| Housing Diameter | 18 mm |
| Eject Force | 490 N |
| Stroke | 170 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.03
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 270 mm |
| Paired article numbers | 108908 |
| Function | Tie Rod End |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M12 x 1,5 |
| Type | Tie Rod End |
| Weight | 0.93 kg |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.04
Important compatibility info
| Material | Cast Steel |
| Weight | 0.492 kg |
| Inner diameter | 60 mm |
| Paired article numbers | 21462 |
| Colour | Black |
| Placement on Vehicle | Front Axle Left, Lower |
| Function | Holder, control arm mounting |
| Type | Holder, control arm mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.04
Important compatibility info
| Material | Plastic |
| Weight | 0.115 kg |
| Lock System | with two keys |
| Type | Cap, fuel tank |
| Function | Cap, fuel tank |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.05
Important compatibility info
| Weight | 0.380 kg |
| Placement on Vehicle | Left |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 60 01 548 160 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.05
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 116.2 mm |
| Width | 50.9 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.8 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Weight | 1.140 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.05
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Weight | 0.235 kg |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (23588)
- 2x Febi Protective Cap/Bellow, shock absorber (19286)
£19.05
Important compatibility info
| Additional Information 2 | with piston clip |
| Placement on Vehicle | Front Axle |
| Length | 155.1 mm |
| Width | 49 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.7 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Weight | 1.359 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.05
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Lower, Front, Front Axle Left, Front Axle Right, inner |
| Outer diameter | 64.8 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Weight | 0.221 kg |
| Inner diameter | 14.1 mm |
| Thickness | 66 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.05
Important compatibility info
| Length | 1102 mm |
| Number of Ribs | 6 |
| Type | V-Ribbed Belt |
| Weight | 0.102 kg |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | V-Ribbed Belt |
| Tensile Cord Material | Aramid |
| Alternator type | for starter generator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.06
Important compatibility info
| Weight | 1.08 kg |
| Placement on Vehicle | Front Axle |
| Length | 116.2 mm |
| Width | 50.9 mm. 54.1 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.06
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 115 mm |
| Inner diameter | 56 mm |
| Thread Type | with left-hand thread |
| Cone Size | 26 mm |
| Function | Tie Rod End |
| Weight | 1.250 kg |
| External Thread Size | M20 x 1,5, M30 x 1,5 |
| Extra Description | ProKit |
| Additional Information | with lock nut |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.06
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Length | 80 mm |
| Width | 53 mm |
| Material | Rubber/Metal |
| Outer diameter | 53 mm |
| Thickness | 80 mm |
| Function | Mounting, control/trailing arm |
| Inner diameter | 14.4 mm |
| Weight | 0.230 kg |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.06
Important compatibility info
| External Thread Size | M10 x 1,25 |
| Weight | 0.23 kg |
| Placement on Vehicle | Front Axle Left |
| Length | 105 mm |
| Material | Steel |
| Spanner Size | 17 |
| Paired article numbers | 42392 |
| Rod/Strut | Coupling Rod |
| Colour | Black |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.06
Important compatibility info
| Weight | 0.612 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 70 mm |
| Thickness | 79 mm |
| Inner diameter | 17 mm |
| Type | Bushing, axle beam |
| Function | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.07
Important compatibility info
| Weight | 0.810 kg |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | without ball bearing, with fastening material |
| Function | Repair Kit, suspension strut support mount |
| Extra Description | ProKit |
| Type | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (03373)
- 1x Febi Rubber Buffer, suspension (26929)
- 1x Febi Nut (37674)
£19.07
Important compatibility info
| Additional Information | with counter nut |
| Weight | 0.514 kg |
| Function | Inner Tie Rod |
| Length | 190 mm |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.07
Important compatibility info
| Weight | 0.17 kg |
| Material | Plastic |
| Outer diameter | 70 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 26 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.07
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 455 mm |
| Housing Diameter | 18 mm |
| Eject Force | 410 N |
| Stroke | 181 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 249.5 mm |
| Type | Gas Spring, boot/cargo area |
| Weight | 0.213 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.07
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023