Important compatibility info
Weight | 1.59 kg |
Placement on Vehicle | Front Axle Right, Rear |
Material | Cast Steel |
Inner diameter | 12 mm |
Steering arm type | Control Arm |
Paired article numbers | 26137 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with lock nut |
External Thread Size | M14 x 1,5 |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Paired article numbers | 180938 |
Additional Information 2 | with ball joint |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Left, Lower |
Additional Information | with rubber mounts |
Weight | 3.97 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,0 |
Additional Information | with fastening/mounting material |
Weight | 2.230 kg |
Placement on Vehicle | Front Axle |
Pipe Diameter | 22 mm |
Steering | with tie rod end |
Type | Tie Rod |
Function | Tie Rod |
Extra Description | ProKit |
Length | 980 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.0 kg |
Placement on Vehicle | Upper Front Axle, Right |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 11819 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with lock nut |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (12563)
- 1x Febi Mounting, control/trailing arm (12577)
Important compatibility info
Replaces | 19384 |
Weight | 0.363 kg |
Width | 27 mm |
Outer diameter | 73 mm |
Inner diameter | 8 mm |
Function | Tensioner Pulley, timing belt |
Additional Information 2 | with screw |
Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Oil Separator, crankcase ventilation |
Function | Oil Separator, crankcase ventilation |
Extra Description | febi Plus |
Weight | 0.257 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.36 kg |
Placement on Vehicle | Front Axle Right |
Material | Sheet Steel |
Additional Information 2 | without ball joint |
Steering arm type | Control Arm |
Paired article numbers | 174164 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 130 mm |
Thickness | 14 mm |
Inner diameter | 90 mm |
Function | Bearing, manual transmission |
Weight | 0.55 kg |
Type | Bearing, manual transmission |
Additional Information 2 | with spacer disc |
Bearing Type | Rolling Bearing |
Bearing Code | 16017C3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, oil pressure |
Weight | 0.106 kg |
Number of Connectors / Ports | 3 |
Type | Sensor, oil pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 647 mm |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Weight | 0.041 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.36 kg |
Placement on Vehicle | Front Axle Left |
Material | Sheet Steel |
Additional Information 2 | without ball joint |
Steering arm type | Control Arm |
Paired article numbers | 174163 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with fastening/mounting material |
Housing material | Aluminium |
Weight | 0.6 kg |
Extra Description | ProKit |
Height | 149 mm |
Width | 125 mm |
Rated Power | 22 W |
Light Design | LED |
Mounting Type | Fully assembled |
Cable Length | 280 mm |
Depth | 60 mm |
Voltage from | 12 V |
Light Distribution | Spot illumination |
Voltage to | 36 V |
Protection Type (IP Code) | IP6K9K |
Fulfils ECE norm | R10 |
Lumen | 2160 lm |
Temperature range from | -30 °C |
Temperature range to | 50 °C |
Function | Worklight |
Inspection Tag | EMC |
Type | Worklight |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Rear |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 26138 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 1.59 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with bearing |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Width of castor bearing surface | 38.1 mm |
Outer diameter | 74 mm |
Operating Mode | Automatic |
Weight | 1.536 kg |
Track rollers material | Plastic |
Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Expansion Tank, coolant |
Function | Expansion Tank, coolant |
Weight | 0.666 kg |
Additional Information 2 | with lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Expansion Tank, coolant (172165)
- 1x Febi Cap, coolant tank (40722)
Important compatibility info
Filter type | Filter Insert |
Function | Air Filter |
Inner diameter | 130 mm |
Height | 420 mm |
Outer diameter | 240 mm |
Weight | 3.426 kg |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.90 kg |
Function | Parts Set, maintenance service |
Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (36562)
- 1x Febi Oil Filter (37257)
- 1x Febi Air Filter (30992)
- 4x Febi Spark Plug (13524)
- 1x Febi Fuel filter (17635)
- 1x Febi Filter, cabin air (17263)
- 1x Febi Screw Plug, oil sump (04572)
Important compatibility info
Function | Window Regulator |
Type | Window Regulator |
Weight | 0.875 kg |
Paired article numbers | 177296 |
Operating Mode | Electric |
Additional Information | without electric motor |
Placement on Vehicle | Right Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 143 mm |
Outer diameter | 75 mm |
Internal Teeth, wheel side | 28 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
External Thread Size | M18 x 1,5 |
Weight | 1.79 kg |
Seal Diameter | 49 mm |
External Teeth, Wheel Side | 25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.5 kg |
Placement on Vehicle | Front Axle Right |
Length | 148 mm |
Thickness | 121 mm |
Paired article numbers | 39874 |
Rod/Strut | Coupling Rod |
Cone Size | 30 mm |
Pipe Diameter | 32 mm |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M24 x 1,5 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Core Depth | 42 mm |
Core Width | 370 mm |
Core Length | 188 mm |
Type | Heat Exchanger, interior heating |
Function | Heat Exchanger, interior heating |
Weight | 1.048 kg |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Width | 80.3 mm |
Outer diameter | 314.4 mm |
Thickness | 105 mm |
Inner diameter | 280 mm |
Bolt Hole Circle Diameter | 160 mm |
Centering Diameter | 118 mm |
Weight | 12.35 kg |
Max.skimmed drum measure | 282 mm |
Rim Hole Number | 5 -Hole |
Type | Brake Drum |
Function | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Control Type | Rotary Operation |
Number of Connectors / Ports | 13 |
Type | Switch, headlight |
Function | Switch, headlight |
Extra Description | febi Plus |
Weight | 0.173 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 7PP 819 810 A |
Weight | 0.182 kg |
Type | Coolant Control Valve |
Function | Coolant Control Valve |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Shock Absorber, driver cab suspension |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Type | Shock Absorber, driver cab suspension |
Piston conrod diameter | 12 mm |
Mounting points diameter | 20 mm |
Pipe Diameter | 46 mm. 40 mm |
Operating Mode | Mechanical |
Placement on Vehicle | Rear |
Max. Length | 235 mm |
Min. Length | 219 mm |
Weight | 1.2 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 24 V |
Weight | 0.1 kg |
Type | Repair Kit, air dryer |
Function | Repair Kit, air dryer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Shaft, drum brake |
Screw length below head | 423 mm |
Paired article numbers | 45517 |
Weight | 5.6 kg |
Internal Thread Size | M12 x 1,5 |
Outer diameter | 110 mm |
Length | 474 mm |
Placement on Vehicle | Rear Axle Right |
Number of Teeth | 10 |
Type | Brake Shaft, drum brake |
Shape/Form | S Shape |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.906 kg |
Function | Parts Set, maintenance service |
Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (36562)
- 1x Febi Oil Filter (37257)
- 1x Febi Air Filter (30992)
- 1x Febi Fuel filter (17635)
- 1x Febi Screw Plug, oil sump (04572)
- 1x Febi Filter, cabin air (17263)
- 4x Febi Spark Plug (13536)
Important compatibility info
Placement on Vehicle | Wheel Side |
Type | Joint Kit, drive shaft |
Seal Diameter | 72.5 mm |
Length | 189 mm |
Weight | 4.040 kg |
External Thread Size | M28 x 1,5 |
Function | Joint Kit, drive shaft |
Outer diameter | 106 mm |
External Teeth, Wheel Side | 30 |
Internal Teeth, wheel side | 29 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.4 kg |
Material | Aluminium |
Outer diameter | 29 mm |
Inner diameter | 7 mm |
Function | Tensioner, timing belt |
Type | Tensioner, timing belt |
Vibration | with vibration damper |
Width of castor bearing surface | 27 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Aluminium |
Number of Wings | 6 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Metal |
Weight | 0.7 kg |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Protection Type (IP Code) | IP6K9K |
Depth | 49 mm |
Housing material | Aluminium |
Lumen | 2500 lm |
Temperature range from | -40 °C |
Temperature range to | 60 °C |
Function | Worklight |
Type | Worklight |
Fulfils ECE norm | R10, R148 |
Weight | 0.580 kg |
Height | 145 mm |
Inspection Tag | EMC, ADR, Cispr 25 Class 3 |
Width | 115 mm |
Cable Length | 200 mm |
Light Distribution | Long-range illumination |
Voltage from | 9 V |
Voltage to | 36 V |
Plug Type | DEUTSCH plug |
Number of Connectors / Ports | 2 |
Rated Power | 24 W |
Light Design | LED |
Mounting Type | Fully assembled |
Extra Description | febi Plus |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with rolling bearing |
Hole Spacing | 200 mm |
Weight | 2.200 kg |
Function | Suspension, propshaft |
Additional Information | with fastening/mounting material |
Type | Suspension, propshaft |
Bearing Type | Rolling Bearing |
Inner diameter | 55 mm |
Length | 232 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.07 kg |
Additional Information 2 | with screw |
Width | 28 mm |
Outer diameter | 142 mm |
Inner diameter | 30 mm |
Number of Ribs | 4 |
Parameter | 5PK |
Type | Belt Pulley, crankshaft |
Function | Belt Pulley, crankshaft |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (27721)
- 1x Febi Pulley Bolt (33675)
Important compatibility info
External Thread Size | M12 x 1,5 |
Additional Information | with lock nut, with rubber mounts |
Placement on Vehicle | Front Axle Right, Lower |
Weight | 3.920 kg |
Paired article numbers | 06157 |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Material | Sheet Steel |
Function | Control/Trailing Arm, wheel suspension |
Cone Size | 17.3 mm |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (03142)
Important compatibility info
Material | Cast Aluminium |
Number of Wings | 4 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Paper |
Weight | 1.82 kg |
Type | Water Pump, engine cooling |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 11 27 7 500 502 S2 |
Function | Chain Kit, oil pump drive |
Timing Chain Size | G53HP |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 52 |
Weight | 0.54 kg |
Type | Chain Kit, oil pump drive |
Extra Description | Full Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (32545)
- 1x Febi Rail, oil pump drive chain (32424)
- 1x Febi Sprocket, crankshaft (30458)
- 1x Febi Sprocket/Gear, oil pump (47980)
- 1x Febi Nut (47977)
Important compatibility info
Inner diameter | 30 mm |
Additional Information 2 | Wheel Bearing integrated into wheel hub |
Outer diameter | 66 mm |
Width | 66 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Weight | 1.980 kg |
Type | Wheel Bearing Kit |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing Kit |
Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.185 kg |
Type | Oil Jet, piston underside cooling |
Function | Oil Jet, piston underside cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.8 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Thickness | 107 mm |
Number of Holes | 6 |
Function | Stub Axle, axle beam |
Type | Stub Axle, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Upper |
Steering arm type | Control Arm |
Paired article numbers | 41253 |
Material | Sheet Steel |
Additional Information 2 | with ball joint |
External Thread Size | M14 x 1,5 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Cone Size | 18 mm |
Weight | 2.63 kg |
Additional Information | with crown nut and split pin, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 212 mm |
Additional Information 2 | with oil sump gasket |
Type | Hydraulic Filter Kit, automatic transmission |
Weight | 0.19 kg |
Height | 76 mm |
Width | 105 mm |
Filter type | Screen Filter |
Function | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Internally Vented |
Weight | 5.26 kg |
Placement on Vehicle | Rear Axle |
Outer diameter | 269 mm |
Thickness | 53.8 mm |
Brake Disc Thickness | 22 mm |
Minimum thickness | 20 mm |
Bolt Hole Circle Diameter | 112 mm |
Centering Diameter | 68 mm |
Surface | Coated |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.76 kg |
External Thread Size | M22 x 1,5 |
Placement on Vehicle | Left |
Paired article numbers | 10480 |
Type | Brake Shaft, drum brake |
Function | Brake Shaft, drum brake |
Length | 682 mm |
Outer diameter | 66 mm |
Number of Teeth | 10 |
Screw length below head | 618 mm |
Shape/Form | S Shape |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 22 |
Weight | 0.105 kg |
Cable Length | 540 mm |
Number of circuits | 4 |
Lambda Sensor | Heated |
Type | Oxygen Sensor |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 682 mm |
External Thread Size | M22 x 1,5 |
Function | Brake Shaft, drum brake |
Screw length below head | 618 mm |
Type | Brake Shaft, drum brake |
Paired article numbers | 10479 |
Number of Teeth | 10 |
Outer diameter | 66 mm |
Placement on Vehicle | Right |
Weight | 6.76 kg |
Shape/Form | S Shape |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.889 kg |
Outer diameter | 70 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Type | Belt Tensioner, v-ribbed belt |
for OE number | 11 28 7 558 752 |
Width of castor bearing surface | 28 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.68 kg |
Number of Ribs | 5 |
Function | Alternator Freewheel Clutch |
Inner diameter | 15 mm |
Outer diameter | 59 mm |
Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.5 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Placement on Vehicle | Right |
for OE number | 51718928 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Paired article numbers | 177838 |
Weight | 3.5 kg |
Additional Information 2 | with ball joint, with rubber mount |
Steering arm type | Triangular Control Arm (CV), Control Arm |
Cone Size | 19 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023