Mountings & Bushes Mountings & Bushes
Fits SEAT LEON (1M1) 1.4 16V
(1999)

Part number: 39555
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Engine Code: APE; Engine Code: AXP; Engine Code: AHW; Fitting Position: Front Axle
Material Rubber
Outer diameter 35 mm
Inner diameter 15 mm
Rod/Strut Coupling Rod
Function Bushing, stabiliser coupling rod
Type Bushing, stabiliser coupling rod

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 39555 Anti Roll Bar Bush
ONLY
£3.94
Quantity:
Part number: 819003610
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: inner
Placement on Vehicle Front Axle, inner
Inner diameter 19 mm
Type Mounting, stabiliser bar
Stabiliser Diameter 21 mm
Bearing/Mounting Type Rubber Mount
Function Mounting, stabiliser bar
FAG 819003610 Anti Roll Bar Bush
ONLY
£4.47
Quantity:
Part number: 22804
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Stabiliser Bar Diameter: 21 mm; for PR number: 0AL
Placement on Vehicle Front Axle
Inner diameter 18 mm
Function Mounting, stabiliser bar
Type Mounting, stabiliser bar

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 22804 Anti Roll Bar Bush
ONLY
£4.47
Quantity:
Part number: 14238
Placement on Vehicle Front Axle Left, Front Axle Right
Function Securing Plate, ball joint
Type Securing Plate, ball joint

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 14238 Lock Washer
ONLY
£4.71
Quantity:
Part number: 104528
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Engine Code: AHW; Engine Code: BCA; Engine Code: AXP
Length 48 mm
Outer diameter 48 mm
Width 30 mm
Material Rubber
Inner diameter 22 mm
Function Mounting, stabiliser bar
Thickness 40 mm
Placement on Vehicle Rear Axle
Type Mounting, stabiliser bar

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 104528 Anti Roll Bar Bush
ONLY
£4.72
Quantity:
Material Rubber/Metal
Outer diameter 33 mm. 36 mm
Thickness 54 mm
Inner diameter 12 mm
Placement on Vehicle Front Axle Left, Front, Front Axle Right
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm

Additional Information

Technical Information

Please tighten the mounting bolts with the wheels on the ground.


General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 07856 Wishbone / Control / Trailing Arm Bush
ONLY
£4.77
Quantity:
Diameter 12 mm. 32 mm
Length 54 mm
Type Mounting, control/trailing arm
Function Mounting, control/trailing arm
Placement on Vehicle Lower, Front, Front Axle Left, Front Axle Right
Paired article numbers NST8162
NAPA NST8162 Wishbone / Control / Trailing Arm Bush
ONLY
£4.86
Quantity:
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Diameter 12 mm. 32 mm
Length 54 mm
Placement on Vehicle Lower, Front, Front Axle Left, Front Axle Right
Manufacturer AUDI SEAT SKODA VOLKSWAGEN
Paired article numbers AST8162
Apec AST8162 Wishbone / Control / Trailing Arm Bush
ONLY
£4.88
Quantity:
Material Rubber/Metal
Outer diameter 60 mm. 27 mm
Thickness 41 mm
Inner diameter 13 mm
Placement on Vehicle Front Axle Right, Front Axle Left, Lower, Rear
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm

Additional Information

Technical Information

Please tighten the mounting bolts with the wheels on the ground.


General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 10814 Wishbone / Control / Trailing Arm Bush
ONLY
£5.09
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Lower; Fitting Position: Front
Outer diameter 1 33 mm
Thickness/Strength 1 54 mm
Inner diameter 1 12 mm
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Delphi TD239W Wishbone / Control / Trailing Arm Bush
ONLY
£5.11
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Left; Fitting Position: Right; Fitting Position: Upper
Function Spring Seat
Type Spring Seat
Placement on Vehicle Front Axle, Left, Right, Upper
First Line FSM5365 Spring Cap / Seat
ONLY
£5.13
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Left; Fitting Position: Right; Fitting Position: Lower; Fitting Position: Front
Inner diameter 12.1 mm
Diameter 32.4 mm
Length 54 mm
Function Mounting, control/trailing arm
Only in connection with FCA5817, FCA5818, FCA5819, FCA5820, FCA5912, FCA5913, FCA6111, FCA6112, FCA6113, FCA6114, FCA6457, FCA6458, FCA6459, FCA6460, FCA6735, FCA6736, FCA6737, FCA6738
Type Mounting, control/trailing arm
Paired article numbers FSK6009
Replaces BSK5935
Borg & Beck BSK6009 Wishbone / Control / Trailing Arm Bush
ONLY
£5.17
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Left; Fitting Position: Right; Fitting Position: Lower; Fitting Position: Front
Only in connection with FCA5817, FCA5818, FCA5819, FCA5820, FCA5912, FCA5913, FCA6111, FCA6112, FCA6113, FCA6114, FCA6457, FCA6458, FCA6459, FCA6460, FCA6735, FCA6736, FCA6737, FCA6738
Length 54 mm
Inner diameter 12.1 mm
Diameter 32.4 mm
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Replaces FSK5935
Paired article numbers FSK6009
First Line FSK6009 Wishbone / Control / Trailing Arm Bush
ONLY
£5.17
Quantity:
Part number: 181917
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Stabiliser Bar Diameter: 18 mm
Function Mounting, stabiliser bar
Placement on Vehicle Rear Axle
Type Mounting, stabiliser bar
Inner diameter 16.2 mm
Thickness 30 mm
Material Rubber
Width 30 mm
Length 48 mm

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 181917 Anti Roll Bar Bush
ONLY
£5.35
Quantity:
Function Mounting, stabiliser bar
Type Mounting, stabiliser bar
Placement on Vehicle Front Axle Left, Front Axle Right
Paired article numbers NST8082
for OE number 1H0411314G, 1J0411314T
NAPA NST8082 Wishbone / Control / Trailing Arm Bush
ONLY
£5.51
Quantity:
Manufacturer AUDI SEAT SKODA VOLKSWAGEN
Placement on Vehicle Front Axle Left, Front Axle Right
Function Mounting, stabiliser bar
Type Mounting, stabiliser bar
Diameter 23 mm
Paired article numbers AST8082
Apec AST8082 Wishbone / Control / Trailing Arm Bush
ONLY
£5.55
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Rear
Bearing/Mounting Type Rubber-Metal Mount
Steering arm type for control arm
Outer diameter 60 mm
Inner diameter 12.5 mm
Function Mounting, control/trailing arm
Width 41 mm
Type Mounting, control/trailing arm
FAG 829009310 Wishbone / Control / Trailing Arm Bush
ONLY
£5.73
Quantity:
Part number: 18358
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Suspension: for vehicles with heavy duty suspension; for PR number: 1GB; or; Suspension: for vehicles with heavy duty suspension; for PR number: G10
Placement on Vehicle Front Axle
Thickness 83 mm
Material PU (Polyurethane)
Function Rubber Buffer, suspension
Type Rubber Buffer, suspension
for OE number 357 412 303 F

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 18358 Bump Stop
ONLY
£6.14
Quantity:
Length 41 mm
Diameter 13 mm. 60 mm
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Placement on Vehicle Rear, Lower, Front Axle Left, Front Axle Right
Paired article numbers NST8084
NAPA NST8084 Wishbone / Control / Trailing Arm Bush
ONLY
£6.17
Quantity:
Function Mounting, control/trailing arm
Placement on Vehicle Rear, Lower, Front Axle Left, Front Axle Right
Type Mounting, control/trailing arm
Diameter 13 mm. 60 mm
Length 41 mm
Manufacturer AUDI SEAT SKODA VOLKSWAGEN
Paired article numbers AST8084
Apec AST8084 Wishbone / Control / Trailing Arm Bush
ONLY
£6.22
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Stabiliser Bar Diameter: 23 mm; for PR number: 0AE
Inner diameter 21 mm
Placement on Vehicle Front Axle
Extra Description ProKit
Additional Information with holder
Additional Information 2 with screw
Type Mounting Kit, stabiliser bar
Function Mounting Kit, stabiliser bar

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

  • 1x Febi Mounting, stabiliser bar (14718)
  • 1x Febi Bracket, stabiliser mounting (23366)
  • 1x Febi Fastening Bolt, stabiliser bar (29507)
Febi 27318 Anti Roll Bar Bush Prokit
ONLY
£6.38
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front; Fitting Position: outer
Inner diameter 21 mm
Bearing/Mounting Type Rubber Mount
Function Mounting, stabiliser bar
Replaces EMB7045
Type Mounting, stabiliser bar
Quinton Hazell EMB7041 Anti Roll Bar Bush
ONLY
£6.40
Quantity:
Paired article numbers NST8133
Placement on Vehicle outer, Rear Axle Left, Rear Axle Right, Lower
Length 60 mm
Diameter 12 mm. 42 mm
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
NAPA NST8133 Wishbone / Control / Trailing Arm Bush
ONLY
£6.41
Quantity:
Diameter 12 mm. 42 mm
Length 60 mm
Type Mounting, control/trailing arm
Function Mounting, control/trailing arm
Placement on Vehicle outer, Rear Axle Left, Rear Axle Right, Lower
Manufacturer AUDI SEAT SKODA VOLKSWAGEN
Paired article numbers AST8133
Apec AST8133 Wishbone / Control / Trailing Arm Bush
ONLY
£6.46
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Left; Fitting Position: Right; Fitting Position: Lower; Fitting Position: Rear
Inner diameter 13.1 mm
Diameter 60 mm
Length 41 mm
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Paired article numbers FSK6053
Borg & Beck BSK6053 Wishbone / Control / Trailing Arm Bush
ONLY
£6.53
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Left; Fitting Position: Right; Fitting Position: Lower; Fitting Position: Rear
Length 41 mm
Inner diameter 13.1 mm
Diameter 60 mm
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Paired article numbers FSK6053
First Line FSK6053 Wishbone / Control / Trailing Arm Bush
ONLY
£6.53
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle
Inner diameter 21 mm
Version New
Function Repair Kit, stabiliser coupling rod
Type Repair Kit, stabiliser coupling rod
Placement on Vehicle Front Axle
Borg & Beck BSK7807K 2x Anti Roll Bar Bush (pair)
ONLY
£6.55
Quantity:
Part number: 14276
Placement on Vehicle Front Axle Left, Front Axle Right
Material Rubber/Metal
Outer diameter 51 mm
Thickness 31 mm
Inner diameter 18 mm
Function Bushing, axle beam
Type Bushing, axle beam

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 14276 Axle Beam Mount
ONLY
£6.55
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle
Inner diameter 21 mm
Version New
Function Repair Kit, stabiliser coupling rod
Type Repair Kit, stabiliser coupling rod
Placement on Vehicle Front Axle
First Line FSK7807K 2x Anti Roll Bar Bush (pair)
ONLY
£6.55
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: outer
Bearing/Mounting Type Rubber Mount
Inner diameter 23 mm
Function Mounting, stabiliser bar
Type Mounting, stabiliser bar
Quinton Hazell EMB7100 Anti Roll Bar Bush
ONLY
£6.56
Quantity:

Page 1 of 4
Mountings & Bushes

What are mountings and bushes?

Mountings and bushes are components used to attach parts securely in your vehicle. Mountings and bushes are designed to keep their associated parts in place and in many cases provide shock absorption and articulation. There are many locations in a vehicle where mountings and bushes are used, especially where metal parts join together and require a rubber separation to prevent metal-on-metal damage.


How do I choose the correct mounting and bushes?

Finding the correct mounting and bushes is best done by cross referencing the original part number (OE). Although some of these parts look similar there can be subtle differences which may lead to them either not fitting correctly or failing prematurely. If you are not able to obtain and cross reference the OE part number here are some things to consider when looking for correct replacements:

  • Number of gears (i.e. 5 speed or 6 speed, manual, automatic etc)

  • Factory modifications (sports pack, levelling suspension, specific shape etc)

  • Transmission type / transmission code

  • Vehicle manufacture date (this is not the date the vehicle was registered but the date it was made)

  • Engine number sequence (up to or after as specific number/letter

  • VIN (chassis number) sequence (up to or after as specific number/letter

  • Standard, hydraulic or electric mounting

  • Diameter or other significant measure


What brand of mountings and bushes should I choose?

There are a number of brands available in the aftermarket. Some brands such as Bosch manufacture mountings and bushes for the original car brands however there are other high quality brands that meet or exceed the original specifications. Brands such as Blue Print, Delphi, Borg & Beck and Febi offer long warranties to take the worry out of choosing a quality part.


How can I tell my mountings or bushes needs replacing?

Often a visual check will show if the mounting or bushes need to be replaced. We always recommend you speak to a qualified mechanic if you are not sure. Some of the symptoms of a faulty mounting or bushes are:

  • There is a knocking noise when turning or going over bumps

  • The rubber has become split/damaged on the mounting or bush

  • There is loose play around the mounting or bush

  • There is fluid leaking from the mounting (hydraulic)

  • The mounting is corroded


Your feedback more
Trusted reviews more
Secure payments more
Simple returns more