Mountings & Bushes Mountings & Bushes
Fits VAUXHALL OMEGA (B) Estate (V94) 2.0
(1994)

This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Rear Axle; Fitting Position: Left; Fitting Position: Right; Fitting Position: Front
Function Bushing, axle cross member
Type Bushing, axle cross member
Borg & Beck BSK6237 Axle Beam Mount
ONLY
£28.34
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Rear Axle; Fitting Position: Left; Fitting Position: Right
Outer diameter 47.5 mm
Function Bushing, axle cross member
Type Bushing, axle cross member
Placement on Vehicle Rear Axle, Left, Right
Borg & Beck BSK6238 Axle Beam Mount
ONLY
£17.56
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Rear; Fitting Position: Left; Fitting Position: Right
Outer diameter 1 34 mm
Thickness/Strength 1 37 mm
Inner diameter 1 14 mm
Function Bushing, stabiliser bar
Type Bushing, stabiliser bar
Delphi TD542W 2x Anti Roll Bar Bush (pair)
ONLY
£6.44
Quantity:
Part number: 02044
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Vehicle Identification Number (VIN) from: *********R1000001; Vehicle Identification Number (VIN) to: *********X1999999; Special Purpose Vehicle: not for armoured vehicles; Special Purpose Vehicle: not for ambulances; Special Purpose Vehicle: not for police vehicles; Special Purpose Vehicle: not for hearses; Suspension: for vehicles with bad road version; Payload: not for increased payload
Weight 0.526 kg
Material Rubber/Metal
Placement on Vehicle Front Axle
Function Suspension Strut Support Mount
Type Suspension Strut Support Mount
Additional Information 2 without ball bearing

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 02044 Top Strut Mounting
ONLY
£15.05
Quantity:
Weight 0.193 kg
Material Rubber/Metal
Outer diameter 48 mm. 24 mm
Thickness 45 mm
Inner diameter 14 mm
Placement on Vehicle Lower Front Axle, Rear
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 02183 Wishbone / Control / Trailing Arm Bush
ONLY
£5.93
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Vehicle Identification Number (VIN) to: *********X1072223
Weight 0.276 kg
Placement on Vehicle Lower Front Axle, Front
Outer diameter 58 mm
Thickness 56 mm
Inner diameter 14 mm
Bearing/Mounting Type Hydro Mount
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 02263 Wishbone / Control / Trailing Arm Bush
ONLY
£11.09
Quantity:
Weight 0.182 kg
Placement on Vehicle Rear Axle, Outer
Length 71 mm
Outer diameter 45 mm
Inner diameter 12 mm
Steering arm type for semi-trailing arm
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 04390 Wishbone / Control / Trailing Arm Bush
ONLY
£8.31
Quantity:
Weight 0.185 kg
Placement on Vehicle Rear Axle, inner
Length 71 mm
Outer diameter 43 mm
Inner diameter 12 mm
Function Mounting, control/trailing arm
Steering arm type for semi-trailing arm
Type Mounting, control/trailing arm

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 04402 Wishbone / Control / Trailing Arm Bush
ONLY
£13.80
Quantity:
Part number: 04443
Material Rubber
Inner diameter 14 mm
Weight 0.030 kg
Placement on Vehicle Rear Axle
Function Mounting, stabiliser bar
Type Mounting, stabiliser bar

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 04443 Anti Roll Bar Bush
ONLY
£5.07
Quantity:
Part number: 14548
Placement on Vehicle Rear Axle Left, inner, Rear Axle Right
Outer diameter 47.5 mm
Thickness 59 mm
Function Bushing, axle beam
Weight 0.257 kg
Type Bushing, axle beam

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 14548 Axle Beam Mount
ONLY
£19.86
Quantity:
Part number: 14549
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Special Purpose Vehicle: not for armoured vehicles; Special Purpose Vehicle: not for ambulances; Special Purpose Vehicle: not for hearses
Material Rubber/Metal
Outer diameter 100 mm
Inner diameter 19 mm
Placement on Vehicle Rear Axle Left, Rear Axle Right
Weight 0.77 kg
Thickness 80 mm
Function Bushing, axle beam
Type Bushing, axle beam

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 14549 Axle Beam Mount
ONLY
£21.80
Quantity:
Part number: 17288
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Vehicle Identification Number (VIN) from: *********R1000001; Suspension: for vehicles without sports suspension
Weight 0.047 kg
Placement on Vehicle Front Axle
Material PU (Polyurethane)
Thickness 28 mm
Inner diameter 27 mm
Function Rubber Buffer, suspension
Type Rubber Buffer, suspension

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 17288 Bump Stop
ONLY
£7.96
Quantity:
Part number: 17471
Width 29 mm
Outer diameter 32 mm. 29 mm
Weight 0.011 kg
Placement on Vehicle Rear Axle
Function Bushing, stabiliser coupling rod
Type Bushing, stabiliser coupling rod

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 17471 Anti Roll Bar Bush
ONLY
£6.09
Quantity:
Part number: 21124
Placement on Vehicle Front Axle
Length 40 mm
Material Rubber
Inner diameter 23 mm
Function Mounting, stabiliser bar
Weight 0.055 kg
Type Mounting, stabiliser bar

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 21124 Anti Roll Bar Bush
ONLY
£5.69
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Left; Fitting Position: Right; Fitting Position: Rear
Length 46 mm
Inner diameter 14.1 mm
Diameter 48.5 mm
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Paired article numbers FSK6004
First Line FSK6004 Wishbone / Control / Trailing Arm Bush
ONLY
£8.09
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Rear Axle
Inner diameter 15 mm
Function Repair Kit, stabiliser coupling rod
Type Repair Kit, stabiliser coupling rod
Placement on Vehicle Rear Axle
First Line FSK6228K 2x Anti Roll Bar Bush (pair)
ONLY
£6.13
Quantity:
Part number: FSK6238
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Rear Axle; Fitting Position: Left; Fitting Position: Right
Function Bushing, axle cross member
Outer diameter 47.5 mm
Type Bushing, axle cross member
Placement on Vehicle Rear Axle, Left, Right
First Line FSK6238 Axle Beam Mount
ONLY
£15.76
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Rear Axle Lower
Inner diameter 13 mm
Bearing/Mounting Type Rubber Mount
Function Mounting, stabiliser bar
Type Mounting, stabiliser bar
Placement on Vehicle Rear Axle Lower
Quinton Hazell EMB7023 Anti Roll Bar Bush
ONLY
£7.35
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Rear Axle; Fitting Position: outer
Bearing/Mounting Type Rubber Mount
Inner diameter 15 mm
Function Mounting, stabiliser bar
Placement on Vehicle Rear Axle, outer
Type Mounting, stabiliser bar
Quinton Hazell EMB7105 Anti Roll Bar Bush
ONLY
£7.10
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Rear Axle Upper
Bearing/Mounting Type Rubber Mount
Inner diameter 14 mm
Function Mounting, stabiliser bar
Type Mounting, stabiliser bar
Placement on Vehicle Rear Axle Upper
Quinton Hazell EMB7120 Anti Roll Bar Bush
ONLY
£7.99
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Left; Fitting Position: Right; Fitting Position: Rear
Steering arm type for control arm
Bearing/Mounting Type Rubber-Metal Mount
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Quinton Hazell EMS1988 Wishbone / Control / Trailing Arm Bush
ONLY
£10.40
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle
Function Rolling Bearing, suspension strut support mount
Inner diameter 62 mm
Outer diameter 86 mm
Type Rolling Bearing, suspension strut support mount
Placement on Vehicle Front Axle
Quinton Hazell QAM152 Strut Anti Friction Bearing
ONLY
£9.90
Quantity:

Mountings & Bushes

What are mountings and bushes?

Mountings and bushes are components used to attach parts securely in your vehicle. Mountings and bushes are designed to keep their associated parts in place and in many cases provide shock absorption and articulation. There are many locations in a vehicle where mountings and bushes are used, especially where metal parts join together and require a rubber separation to prevent metal-on-metal damage.


How do I choose the correct mounting and bushes?

Finding the correct mounting and bushes is best done by cross referencing the original part number (OE). Although some of these parts look similar there can be subtle differences which may lead to them either not fitting correctly or failing prematurely. If you are not able to obtain and cross reference the OE part number here are some things to consider when looking for correct replacements:

  • Number of gears (i.e. 5 speed or 6 speed, manual, automatic etc)

  • Factory modifications (sports pack, levelling suspension, specific shape etc)

  • Transmission type / transmission code

  • Vehicle manufacture date (this is not the date the vehicle was registered but the date it was made)

  • Engine number sequence (up to or after as specific number/letter

  • VIN (chassis number) sequence (up to or after as specific number/letter

  • Standard, hydraulic or electric mounting

  • Diameter or other significant measure


What brand of mountings and bushes should I choose?

There are a number of brands available in the aftermarket. Some brands such as Bosch manufacture mountings and bushes for the original car brands however there are other high quality brands that meet or exceed the original specifications. Brands such as Blue Print, Delphi, Borg & Beck and Febi offer long warranties to take the worry out of choosing a quality part.


How can I tell my mountings or bushes needs replacing?

Often a visual check will show if the mounting or bushes need to be replaced. We always recommend you speak to a qualified mechanic if you are not sure. Some of the symptoms of a faulty mounting or bushes are:

  • There is a knocking noise when turning or going over bumps

  • The rubber has become split/damaged on the mounting or bush

  • There is loose play around the mounting or bush

  • There is fluid leaking from the mounting (hydraulic)

  • The mounting is corroded


Your feedback more
Trusted reviews more
Secure payments more
Simple returns more