Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Number of Teeth, ABS ring | 44 |
| External Thread Size | M24 x 1,5 |
| Length | 157 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 2.780 kg |
| Internal Teeth, wheel side | 36 |
| Seal Diameter | 65 mm |
| External Teeth, Wheel Side | 31 |
| Outer diameter | 93 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Function | Belt Tensioner, V-ribbed belt |
| Material | Metal |
| Width of castor bearing surface | 46 mm |
| Type | Belt Tensioner, V-ribbed belt |
| Weight | 2.036 kg |
| Operating Mode | Automatic |
| Outer diameter | 74 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Weight | 0.522 kg |
| Function | Tensioner, timing chain |
| Operating Mode | Hydraulic |
| Type | Tensioner, timing chain |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Length | 202 mm |
| Operating Mode | Automatic |
| Paired article numbers | 43636 |
| Function | Adjuster, braking system |
| Placement on Vehicle | Rear Axle Right |
| Weight | 3.440 kg |
| Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Additional Information 2 | Self-adjusting |
| Placement on Vehicle | Right |
| Operating Mode | Automatic |
| Paired article numbers | 31608 |
| Function | Adjuster, braking system |
| Type | Adjuster, braking system |
| Weight | 3.2 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Weight | 2.320 kg |
| Function | Gasket Set, wheel hub |
| Placement on Vehicle | Rear Axle |
| Type | Gasket Set, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, drive shaft (38541)
- 1x Febi Shaft Seal, wheel hub (24758)
- 1x Febi Ring, wheel hub (04455)
- 1x Febi Thrust Washer, external planetary gearbox (21951)
- 1x Febi Seal Ring, wheel hub (08008)
- 1x Febi Gasket, external planetary gearbox (08009)
- 1x Febi Gasket, external planetary gearbox (08010)
- 1x Febi Gasket, external planetary gearbox (08011)
- 1x Febi Toothed Disc, external planetary gearbox (08488)
- 1x Febi Sensor Ring, ABS (18612)
£56.22
Important compatibility info
| Operating Mode | Electric |
| Paired article numbers | 24139 |
| Weight | 0.524 kg |
| Placement on Vehicle | Right Rear |
| Function | Window Regulator |
| Type | Window Regulator |
| Additional Information | without electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Weight | 1.693 kg |
| Placement on Vehicle | Front Axle Right, Lower, Rear |
| Material | Aluminium |
| Paired article numbers | 40380 |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Additional Information | with fastening/mounting material |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (31732)
- 2x Febi Washer (07755)
- 1x Febi Nut (21557)
- 1x Febi Bolt, wheel alignment (40196)
£56.22
Important compatibility info
| for OE number | 1 138 760 |
| Weight | 0.360 kg |
| Function | Tensioner, timing chain |
| Operating Mode | Hydraulic |
| Type | Tensioner, timing chain |
Additional Information
Technical Information
The correct chain tensioner has to be ascertained by the vehicle manufacturer using the VIN and looking up the according service manual.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| for OE number | 16620-0Y020 |
| Material | Plastic |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Weight | 0.512 kg |
| Type | Belt Tensioner, V-ribbed belt |
| Function | Belt Tensioner, V-ribbed belt |
| Width of castor bearing surface | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Weight | 2.936 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 70 mm |
| Outer diameter | 137 mm |
| Inner diameter | 27.5 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 100 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Bearing Type | Angular Ball Bearing |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Housing length | 245.5 mm |
| Function | Gas Spring, bonnet |
| Type | Gas Spring, bonnet |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 17.8 mm |
| Stroke | 174 mm |
| Eject Force | 345 N |
| Housing Diameter | 19 mm |
| Weight | 0.2 kg |
| Length | 447 mm |
| Placement on Vehicle | both sides |
| Additional Information | Change interval/date according to gas spring imprint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Weight | 1.640 kg |
| Width of castor bearing surface | 38 mm |
| Outer diameter | 74 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Placement on Vehicle | Right |
| Operating Mode | Automatic |
| Paired article numbers | 31613 |
| Function | Adjuster, braking system |
| Additional Information 2 | Self-adjusting |
| Type | Adjuster, braking system |
| Weight | 3.00 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 80 |
| Weight | 0.21 kg |
| Timing Chain Size | G53H, G53HRF |
| Function | Chain, oil pump drive |
| Additional Information 2 | Requires special tools for mounting |
| Type | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 228 mm |
| Operating Mode | Automatic |
| Paired article numbers | 35095 |
| Weight | 3.5 kg |
| Type | Adjuster, braking system |
| Function | Adjuster, braking system |
| Hole Spacing | 175 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 178689 |
| Operating Mode | Automatic |
| Function | Adjuster, braking system |
| Type | Adjuster, braking system |
| Weight | 3.123 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Weight | 0.58 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 112 |
| Timing Chain Size | G68HPF, G68HR |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Track rollers material | Metal |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Weight | 2.118 kg |
| Outer diameter | 74 mm |
| Operating Mode | Automatic |
| Mounting points diameter | 10 mm |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 38 mm |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Number of Ribs | 5 |
| Inner diameter | 30 mm |
| Thickness | 29 mm |
| Outer diameter | 143 mm |
| Weight | 1.76 kg |
| Type | Belt Pulley, crankshaft |
| for OE number | 06A 105 243 E |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Additional Information 2 | Self-adjusting |
| Weight | 3.1 kg |
| Placement on Vehicle | Left |
| Operating Mode | Automatic |
| Paired article numbers | 31612 |
| Function | Adjuster, braking system |
| Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Placement on Vehicle | Left |
| Length | 704 mm |
| Outer diameter | 104 mm |
| Shape/Form | S Shape |
| Type | Brake Shaft, drum brake |
| Function | Brake Shaft, drum brake |
| Screw length below head | 659 mm |
| Number of Teeth | 10 |
| Paired article numbers | 172526 |
| Weight | 6.530 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.050 kg |
| Cable Length | 764 mm |
| Type | Sensor, wheel speed |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Weight | 0.355 kg |
| Height | 98 mm |
| Width | 122 mm |
| Inspection Tag | EMC, ADR |
| Port / Connector type | DIN Connector |
| Rated Power | 12 W |
| Light Design | LED |
| Voltage from | 9 V |
| Voltage to | 30 V |
| Protection Type (IP Code) | IP67 |
| Type | Rotating Beacon |
| Fulfils ECE norm | R65, R10 |
| Temperature range from | -30 °C |
| Temperature range to | 50 °C |
| Function | Rotating Beacon |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 41052 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 3.77 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint |
| Weight | 3.302 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 18 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Paired article numbers | 181405 |
| External Thread Size | M14 x 1,5 |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Additional Information | with gasket/seal |
| Type | Thermostat Housing |
| Weight | 0.234 kg |
| Function | Thermostat Housing |
| Additional Information 2 | with thermostat, with sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Weight | 3.4 kg |
| Operating Mode | Automatic |
| Paired article numbers | 31579 |
| Type | Adjuster, braking system |
| Function | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Weight | 3.12 kg |
| Placement on Vehicle | Left |
| Operating Mode | Automatic |
| Paired article numbers | 31618 |
| Function | Adjuster, braking system |
| Replaces | 31595 |
| Additional Information 2 | Self-adjusting |
| Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Weight | 0.460 kg |
| Height | 156 mm |
| Width | 122 mm |
| Inspection Tag | EMC, ADR |
| Port / Connector type | DIN flexible |
| Rated Power | 12 W |
| Light Design | LED |
| Voltage from | 9 V |
| Voltage to | 30 V |
| Protection Type (IP Code) | IP67 |
| Type | Rotating Beacon |
| Fulfils ECE norm | R65, R10 |
| Temperature range from | -30 °C |
| Temperature range to | 50 °C |
| Function | Rotating Beacon |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Material | CR (chloroprene rubber) |
| Weight | 0.963 kg |
| Outer diameter | 106 mm |
| Inner diameter | 100 mm |
| Type | Charge Air Hose |
| Function | Charge Air Hose |
| Extra Description | ProKit |
| Additional Information 2 | with clamps |
| Hose Length | 270 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Charge Air Hose (46463)
- 2x Febi Fastening Clamp, charge air hose (39028)
£56.22
Important compatibility info
| Weight | 0.62 kg |
| Function | Expansion Tank, coolant |
| Additional Information | with coolant level sensor |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Outer diameter | 138 mm |
| Thickness | 44.5 mm |
| Inner diameter | 25 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Weight | 1.47 kg |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.24
Important compatibility info
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Outer diameter | 86 mm |
| Width | 37 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Inner diameter | 50 mm |
| Bearing Type | Tapered Roller Bearing |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Weight | 4.460 kg |
| Outer diameter 1 | 67 mm |
| Outer diameter 2 | 169 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.25
Important compatibility info
| Weight | 0.3 kg |
| Function | Tensioner, timing belt |
| Type | Tensioner, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.26
Important compatibility info
| Weight | 6.85 kg |
| Thickness | 47.6 mm |
| Brake Disc Thickness | 26 mm |
| Minimum thickness | 24.2 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 59 mm |
| Surface | Coated |
| Function | Brake Disc |
| Placement on Vehicle | Front Axle |
| Outer diameter | 281 mm |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.26
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 7.100 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 278 mm |
| Thickness | 48.5 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 23 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.6 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.26
Important compatibility info
| Outer diameter | 156 mm |
| Thickness | 44 mm |
| Inner diameter | 30 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Weight | 2.290 kg |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.26
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 122 |
| Weight | 0.720 kg |
| Timing Chain Size | G68HR |
| Function | Timing Chain |
| Additional Information 2 | Requires special tools for mounting |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.29
Important compatibility info
| Weight | 0.140 kg |
| Type | Slave Cylinder, clutch |
| Function | Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.32
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Sensor, crankshaft pulse |
| Additional Information 2 | with seal ring |
| Weight | 0.036 kg |
| Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.32
Important compatibility info
| Placement on Vehicle | Right Rear |
| Additional Information | with adjuster |
| Paired article numbers | 197196 |
| Number of Connectors / Ports | 6 |
| Weight | 0.6 kg |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.32
Important compatibility info
| Placement on Vehicle | Left Rear |
| Additional Information | with adjuster |
| Paired article numbers | 197195 |
| Number of Connectors / Ports | 6 |
| Weight | 0.6 kg |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.32
Important compatibility info
| Material | Rubber/Metal |
| Weight | 0.519 kg |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
| Placement on Vehicle | Rear Axle |
| Length | 124 mm |
| Width | 78 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.32
Important compatibility info
| Weight | 1.188 kg |
| Placement on Vehicle | Front, both sides |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Additional Information 2 | with splash protection cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.32
Important compatibility info
| Weight | 3.360 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (47013)
- 1x Febi Camber Correction Screw (37216)
£56.34
Important compatibility info
| Weight | 0.257 kg |
| Placement on Vehicle | transmission sided |
| Material | ACM (Polyacrylate), PTFE (polytetrafluoroethylene) |
| Outer diameter | 191 mm |
| Thickness | 16 mm |
| Inner diameter | 165 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.34
Important compatibility info
| Surface | Coated |
| Centering Diameter | 62 mm |
| Minimum thickness | 10.5 mm |
| Brake Disc Thickness | 12 mm |
| Weight | 5.320 kg |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
| Bolt Hole Circle Diameter | 114.3 mm |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 290 mm |
| Thickness | 53.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.35
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.104 kg |
| Cable Length | 803 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.35
Important compatibility info
| Weight | 7.8 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 305 mm |
| Thickness | 44.7 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 98 mm |
| Centering Diameter | 59 mm |
| Surface | Coated |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.35
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023