Important compatibility info
Steering arm type | for control arm |
Bore Diameter | 12.5 mm |
Number of mounting bores | 4 |
Mounting Type | Bolted |
Thread Measurement 1 | M18x1.5 |
Bore Diameter 1 | 20.6 mm |
Function | Ball Joint |
Additional Information 2 | without bolts/screws |
Type | Ball Joint |
Important compatibility info
Steering arm type | for control arm |
Mounting Type | Bolted |
Number of Rivet Holes | 3 |
Thread Measurement 1 | M12x1.5 |
Bore Diameter 1 | 15.3 mm |
Bore Diameter 2 | 21.3 mm |
Function | Ball Joint |
Version | Fitting Kit |
Placement on Vehicle | Front Axle Left, Lower |
Type | Ball Joint |
Important compatibility info
Number of Rivet Holes | 3 |
Thread Measurement 1 | M12x1.5 |
Bore Diameter 1 | 15.3 mm |
Function | Ball Joint |
Version | Fitting Kit |
Bore Diameter 2 | 21.3 mm |
Mounting Type | Bolted |
Type | Ball Joint |
Steering arm type | for control arm |
Placement on Vehicle | Front Axle Left, Lower |
Important compatibility info
Length | 116 mm |
Height | 96 mm |
Width | 54 mm |
Thread Size | M14 x 1,5 x 29,5 |
Type | Ball Joint |
Function | Ball Joint |
Important compatibility info
Placement on Vehicle | Rear Axle Right |
Paired article numbers | 19808 |
Cone Size | 19 mm |
Function | Ball Joint |
Weight | 0.615 kg |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thread Size | M18 x 1,5 |
Type | Ball Joint |
Function | Ball Joint |
Material | Steel |
Cone Size | 21.8 mm |
Important compatibility info
Width | 77 mm |
Material | Steel |
Type | Ball Joint |
Function | Ball Joint |
Cone Size | 19 mm |
Placement on Vehicle | Front Axle |
Height | 124 mm |
Important compatibility info
Length | 130 mm |
Function | Ball Joint |
Thread Size | M18x1.5 |
Width | 108 mm |
Height | 110 mm |
Placement on Vehicle | Front Axle, outer, Lower |
Type | Ball Joint |
Important compatibility info
Paired article numbers | QSJ3883S |
Cone Size | 18 mm |
Type | Ball Joint |
Function | Ball Joint |
Placement on Vehicle | Front Axle Left |
Important compatibility info
Function | Ball Joint |
Paired article numbers | QSJ3882S |
Cone Size | 23 mm |
Type | Ball Joint |
Placement on Vehicle | Front Axle Right |
Important compatibility info
Steering arm type | for control arm |
Version | Fitting Kit |
Function | Ball Joint |
Type | Ball Joint |
Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
Important compatibility info
Length | 140 mm |
Height | 108 mm |
Width | 90 mm |
Thread Size | M14 x 1,5 x 23,0 |
Paired article numbers | TC5008 |
Type | Ball Joint |
Function | Ball Joint |
Important compatibility info
Cone Size | 19.5 mm |
Function | Ball Joint |
Placement on Vehicle | Front Axle, Lower |
Type | Ball Joint |
Height | 116 mm |
Width | 100 mm |
Material | Steel |
Thread Size | M16x1,5 |
Important compatibility info
Bore Diameter 1 | 20.6 mm |
Bore Diameter | 12.5 mm |
Mounting Type | Bolted |
Thread Measurement 1 | M18x1.5 |
Additional Information 2 | without bolts/screws |
Function | Ball Joint |
Type | Ball Joint |
Number of mounting bores | 4 |
Steering arm type | for control arm |
Important compatibility info
Weight | 0.500 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right, Upper |
Function | Ball Joint |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Net weight | 0.5 kg |
Function | Ball Joint |
Type | Ball Joint |
Placement on Vehicle | Front Axle, outer, Lower |
Important compatibility info
Function | Ball Joint |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Weight | 0.890 kg |
External Thread Size | M16 x 1,5 |
Type | Ball Joint |
Additional Information 2 | with crown nut |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Mounting Type | Bolted |
Function | Ball Joint |
Type | Ball Joint |
Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
Paired article numbers | NST0056 |
Important compatibility info
Type | Ball Joint |
Function | Ball Joint |
Cone Size | 19.1 mm |
Thread Measurement 1 | M16 X 1,5 |
Placement on Vehicle | Front Axle, Lower, outer |
Material | Steel |
Important compatibility info
Version | Fitting Kit |
Function | Ball Joint |
Type | Ball Joint |
Steering arm type | for control arm |
Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
Important compatibility info
Title | Ball Joint Separator - Fork Type - Large |
Type | Puller, ball joint |
Function | Puller, ball joint |
Tool handle type | Handle (cylindrical, short) |
Jaw Width | 35 mm |
Tool Handle Length | 285 mm |
Additional Information
General Information
Fork Ball Joint Separator - Large. Fork Ball Joint Separator - Large
- Medium size (25mm internal jaw width) available Part No 5496A
- Essential service tool
- Correctly hardened and tempered
- Selected steel
- Fork ball joint separator - Large (35mm internal jaw width)
Important compatibility info
Number of mounting bores | 3 |
Mounting Type | Bolted |
Additional Information 2 | without bolts/screws |
Number of Rivet Holes | 3 |
Thread Measurement 1 | M14x1.5 |
Bore Diameter | 12.5 mm |
Bore Diameter 1 | 16.1 mm |
Function | Ball Joint |
Type | Ball Joint |
Steering arm type | for control arm |
Bore Diameter 2 | 19 mm |
Important compatibility info
Function | Ball Joint |
Type | Ball Joint |
Manufacturer | CITROEN PEUGEOT |
Model | 407 508 C5 C6 |
Mounting Type | Bolted |
Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
Steering arm type | for control arm |
Paired article numbers | AST0056 |
Important compatibility info
Mounting Type | Bolted |
Steering arm type | for control arm |
Thread Measurement 1 | M16x1.5 |
Thread Measurement 2 | M30x1.5 |
Version | Fitting Kit |
Function | Ball Joint |
Type | Ball Joint |
Bore Diameter 1 | 19.7 mm |
Important compatibility info
Steering arm type | for control arm |
Mounting Type | Bolted |
Additional Information 2 | without bolts/screws |
Number of Rivet Holes | 2 |
Bore Diameter 1 | 18 mm |
Thread Measurement 1 | M14x2 |
Function | Ball Joint |
Number of mounting bores | 2 |
Type | Ball Joint |
Bore Diameter 2 | 20 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
Important compatibility info
Weight | 1.270 kg |
Function | Ball Joint |
Type | Ball Joint |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Additional Information 2 | with crown nut |
Steering arm type | for control arm |
Cone Size | 20.6 mm |
Mounting points diameter | 10.2 mm |
External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.47 kg |
Extra Description | ProKit |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Function | Ball Joint |
External Thread Size | M12 x 1,25 |
Type | Ball Joint |
Additional Information 2 | with retaining ring |
Steering arm type | for control arm |
Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with crown nut |
Cone Size | 19.5 mm |
Weight | 1.25 kg |
Steering arm type | for control arm |
Mounting points diameter | 12 mm |
Type | Ball Joint |
Function | Ball Joint |
External Thread Size | M16 x 1,5 |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Ball Joint |
Cone Size | 18 mm |
Steering arm type | for control arm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Type | Ball Joint |
Additional Information 2 | with crown nut |
Paired article numbers | NST0279 |
Important compatibility info
Paired article numbers | ADN18603 |
Weight | 1.488 kg |
Cone Size | 19.5 mm |
Placement on Vehicle | Front Axle Right, Lower |
Function | Ball Joint |
Mounting points diameter | 11 mm |
Type | Ball Joint |
Additional Information 2 | with washers, with bolts/screws |
Steering arm type | for control arm |
External Thread Size | M18 x 1,5, M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Ball Joint |
Mounting points diameter | 11 mm |
Cone Size | 19.5 mm |
Paired article numbers | ADN18605 |
Placement on Vehicle | Front Axle Left, Lower |
Weight | 1.426 kg |
External Thread Size | M18 x 1,5 |
Type | Ball Joint |
Additional Information 2 | with bolts/screws, with washers |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 194701 |
Placement on Vehicle | Front Axle Left |
Weight | 0.780 kg |
Cone Size | 18 mm |
Type | Ball Joint |
Function | Ball Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 40 mm |
Thickness | 116 mm |
Cone Size | 28.6 mm |
Function | Ball Head |
Placement on Vehicle | Front Axle |
Length | 122.5 mm |
Internal Thread Size | M26 x 1,5 |
Type | Ball Head |
External Thread Size | M20 x 1,5 |
Weight | 1.515 kg |
Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size | 17.2 mm |
Thread Size | M12x1,25 |
Type | Ball Joint |
Function | Ball Joint |
Placement on Vehicle | Front Axle, Lower |
Important compatibility info
Bore Diameter 2 | 22.5 mm |
Version | Fitting Kit |
Thread Measurement 1 | M10x1.25 |
Thread Size | M18x1.5 |
Bore Diameter 1 | 20.5 mm |
Function | Ball Joint |
Number of mounting bores | 4 |
Mounting Type | Bolted |
Steering arm type | for control arm |
Type | Ball Joint |
Important compatibility info
Type | Ball Joint |
Function | Ball Joint |
External Thread Size | M20 x 1,5, M16 x 1,5 |
Weight | 1.095 kg |
Thickness | 120 mm |
Placement on Vehicle | Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | for control arm |
Mounting Type | Bolted |
Bore Diameter 1 | 17.6 mm |
Number of Rivet Holes | 3 |
Version | Fitting Kit |
Function | Ball Joint |
Thread Measurement 1 | M14x1.5 |
Number of mounting bores | 3 |
Type | Ball Joint |
Bore Diameter 2 | 21.2 mm |
Placement on Vehicle | Front Axle Left, Lower |
Important compatibility info
Number of mounting bores | 4 |
Mounting Type | Bolted |
Additional Information 2 | without bolts/screws |
Number of Rivet Holes | 4 |
Thread Measurement 1 | M16x1.5 |
Bore Diameter | 12.2 mm |
Function | Ball Joint |
Type | Ball Joint |
Steering arm type | for control arm |
Bore Diameter 2 | 22 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
Bore Diameter 1 | 19.4 mm |
Important compatibility info
Additional Information 2 | without bolts/screws |
Number of Rivet Holes | 2 |
Bore Diameter 1 | 18 mm |
Number of mounting bores | 2 |
Thread Measurement 1 | M14x2 |
Function | Ball Joint |
Type | Ball Joint |
Mounting Type | Bolted |
Steering arm type | for control arm |
Bore Diameter 2 | 20 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
Important compatibility info
Steering arm type | for control arm |
Type | Ball Joint |
Cone Size | 18 mm |
Additional Information 2 | with crown nut |
Function | Ball Joint |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Model | CT200H |
Manufacturer | LEXUS |
Paired article numbers | AST0279 |
Important compatibility info
Placement on Vehicle | Front Axle |
Thread Measurement 1 | M16x2 |
Cone Size | 19.4 mm |
Type | Ball Joint |
Function | Ball Joint |
Important compatibility info
Type | Ball Joint |
Function | Ball Joint |
Placement on Vehicle | Front Axle Left |
Manufacturer | LEXUS |
Model | GS300 GS430 GS450h GS460 IS220d IS250 |
Paired article numbers | AST0300 |
Important compatibility info
Number of mounting bores | 3 |
Mounting Type | Bolted |
Number of Rivet Holes | 3 |
Thread Measurement 1 | M14x1.5 |
Bore Diameter | 12.5 mm |
Function | Ball Joint |
Additional Information 2 | without bolts/screws |
Type | Ball Joint |
Steering arm type | for control arm |
Bore Diameter 2 | 19 mm |
Bore Diameter 1 | 16.1 mm |
Important compatibility info
Bore Diameter 2 | 44.5 mm |
Mounting Type | Pressed |
Version | Fitting Kit |
Bore Diameter 1 | 21.9 mm |
Steering arm type | for control arm |
Function | Ball Joint |
Type | Ball Joint |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper |
Important compatibility info
Weight | 0.653 kg |
Steering arm type | for control arm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information 2 | with grease cap |
Function | Ball Joint |
Extra Description | ProKit |
Type | Ball Joint |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (24632)
- 2x Febi Nut (22263)
- 1x Febi Nut, stabiliser bar (22264)
Important compatibility info
Thread Size | M16 x 1,5 |
Type | Ball Joint |
Function | Ball Joint |
Width | 87 mm |
Height | 137 mm |
Placement on Vehicle | Front Axle, Lower |
Material | Steel |
Important compatibility info
Steering arm type | for control arm |
Mounting Type | Pressed |
Version | Fitting Kit |
Bore Diameter 1 | 23.9 mm |
Function | Ball Joint |
Bore Diameter 2 | 44.5 mm |
Type | Ball Joint |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Lower |
Important compatibility info
Mounting Type | Pressed |
Version | Fitting Kit |
Bore Diameter 1 | 21.9 mm |
Bore Diameter 2 | 44.5 mm |
Function | Ball Joint |
Type | Ball Joint |
Steering arm type | for control arm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper |
Important compatibility info
Mounting Type | Pressed |
Version | Fitting Kit |
Bore Diameter 1 | 23.9 mm |
Function | Ball Joint |
Type | Ball Joint |
Steering arm type | for control arm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Lower |
Bore Diameter 2 | 44.5 mm |
Important compatibility info
Function | Ball Joint |
Type | Ball Joint |
Placement on Vehicle | Front Axle Left |
Paired article numbers | NST0300 |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023