Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 7.550 kg |
| Paired article numbers | 174692 |
| Steering arm type | Control Arm |
| Inner diameter | 16 mm |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Surface | Coated |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
| Number of Teeth | 122 |
| Width | 26.5 mm |
| Weight | 0.517 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (14370)
- 1x Febi Tensioner Pulley, timing belt (11559)
£75.03
Important compatibility info
| Placement on Vehicle | both sides |
| Weight | 2.0 kg |
| Type | Gasket Set, wheel hub |
| Function | Gasket Set, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ring, wheel hub (04455)
- 1x Febi Thrust Washer, external planetary gearbox (24759)
- 1x Febi Gasket, external planetary gearbox (08009)
- 1x Febi Gasket, external planetary gearbox (03429)
- 1x Febi Gasket, external planetary gearbox (08010)
- 1x Febi Gasket, external planetary gearbox (08011)
- 1x Febi Toothed Disc, external planetary gearbox (08488)
- 1x Febi Shaft Seal, drive shaft (38541)
- 1x Febi Shaft Seal, wheel hub (24758)
£75.03
Important compatibility info
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Bearing Type | Angular Ball Bearing |
| Outer diameter | 70 mm |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Weight | 3.491 kg |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Inner diameter | 30 mm |
| Width | 64 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Material | Sheet Steel |
| Steering arm type | Triangular Control Arm (CV) |
| Paired article numbers | 37612 |
| Placement on Vehicle | Front Axle Right, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 1.021 kg |
| Steering arm type | Control Arm |
| Material | Aluminium |
| Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (45377)
- 1x Febi Nut, stabiliser bar (22264)
£75.03
Important compatibility info
| Placement on Vehicle | Rear Axle, Front Axle |
| Length | 209.8 mm |
| Width | 92 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 29.5 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 7.550 kg |
| Paired article numbers | 174693 |
| Steering arm type | Control Arm |
| Inner diameter | 16 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Weight | 0.157 kg |
| Number of Connectors / Ports | 2. 4 |
| Type | Resistor, interior blower |
| Function | Resistor, interior blower |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Placement on Vehicle | Rear Axle Right, Upper |
| Material | Aluminium |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 174783 |
| Steering arm type | Control Arm |
| Weight | 2.68 kg |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 179988 |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 4.55 kg |
| Material | Sheet Steel |
| Placement on Vehicle | Lower, Front Axle Right |
| Additional Information | with rubber-metal mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.04
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 22 mm |
| Weight | 5.582 kg |
| Paired article numbers | 181052 |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.04
Important compatibility info
| Mounting points diameter | 18 mm |
| Housing length | 310 mm |
| Paired article numbers | 29338 |
| Weight | 0.786 kg |
| Placement on Vehicle | Right Rear |
| Length | 521 mm |
| Eject Force | 760 N |
| Stroke | 172 mm |
| Housing Diameter | 34 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.04
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 324 mm |
| Thickness | 54 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 18.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Weight | 7.3 kg |
| Number of mounting bores | 1 |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.05
Important compatibility info
| Weight | 2.437 kg |
| Width | 36 mm |
| Outer diameter | 72 mm |
| Thickness | 168 mm |
| Inner diameter | 45 mm |
| Outer Length | 160 mm |
| Type | Suspension, propshaft |
| Function | Suspension, propshaft |
| Additional Information 2 | with rolling bearing |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.06
Important compatibility info
| Weight | 0.456 kg |
| Opening Temperature | 103 °C |
| Type | Thermostat Housing |
| Function | Thermostat Housing |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.07
Important compatibility info
| Minimum thickness | 25 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 300 mm |
| Thickness | 51.9 mm |
| Brake Disc Thickness | 28 mm |
| Rim Hole Number | 5 -Hole |
| Weight | 7.74 kg |
| Centering Diameter | 67 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
| for OE number | 447 423 03 12 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.08
Important compatibility info
| Type | Cylinder Head, air compressor |
| Function | Cylinder Head, air compressor |
| Weight | 1.6 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.09
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 36 |
| Weight | 6.536 kg |
| Min. Length | 515 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Transmission-side joint diameter | 123 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.12
Important compatibility info
| for OE number | 90919-02262 |
| Weight | 0.22 kg |
| Length | 150 mm |
| Function | Ignition Coil |
| Number of Connectors / Ports | 4 |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.12
Important compatibility info
| Thickness | 140 mm |
| Weight | 10.7 kg |
| Outer diameter | 286 mm. 200 mm |
| External Thread Size | M12 x 1,75, M22 x 1,5 |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.13
Important compatibility info
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Surface | Coated |
| Bolt Hole Circle Diameter | 105 mm |
| Centering Diameter | 60 mm |
| Minimum thickness | 23 mm |
| Brake Disc Thickness | 26 mm |
| Thickness | 45.5 mm |
| Outer diameter | 300 mm |
| Placement on Vehicle | Front Axle |
| Weight | 8.6 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.14
Important compatibility info
| Function | Oil Separator, crankcase ventilation |
| Extra Description | febi Plus |
| Type | Oil Separator, crankcase ventilation |
| Weight | 0.530 kg |
| Additional Information | with gasket/seal, with venting hoses |
| Number of hoses | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Hose, crankcase ventilation (171008)
- 1x Febi Hose, crankcase ventilation (170596)
- 1x Febi Oil Separator, crankcase ventilation (170406)
£75.17
Important compatibility info
| Rotor Style | Internally Vented |
| Weight | 5.160 kg |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 254 mm |
| Thickness | 42 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 55 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.17
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Weight | 8.830 kg |
| Cone Size | 22 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M16 x 1,5 |
| Paired article numbers | 178984 |
| Additional Information | with crown nut and split pin, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.19
Important compatibility info
| Type | Shock Absorber |
| Bore Diameter | 14 mm |
| Shock Absorber Design | Suspension Strut |
| External Thread Size | M12 x 1,25 |
| Pipe Diameter | 45 mm |
| Max. Length | 535 mm |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Min. Length | 350 mm |
| Shock Absorber Type | Gas Pressure |
| Piston conrod diameter | 20 mm |
| Mounting bores distance | 60 mm |
| Weight | 3.900 kg |
| Shock Absorber System | Twin-Tube |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.19
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 41 mm |
| Outer diameter | 238 mm |
| Thickness | 81.5 mm |
| Inner diameter | 200 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 46.9 mm |
| Weight | 5.66 kg |
| Max.skimmed drum measure | 201 mm |
| Rim Hole Number | 4 -Hole |
| Type | Brake Drum |
| Function | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.20
Important compatibility info
| Type | Drive Shaft |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 105.1 mm |
| Transmission-side joint diameter | 107.5 mm |
| Min. Length | 618 mm |
| External Teeth, Diff.Side | 26 |
| Weight | 9.014 kg |
| External Teeth, Wheel Side | 38 |
| Thread Size | M20x1,5 |
| Additional Information 2 | with screw |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.21
Important compatibility info
| Function | Brake Disc |
| Minimum thickness | 23 mm |
| Outer diameter | 320 mm |
| Thickness | 48.8 mm |
| Brake Disc Thickness | 25 mm |
| Placement on Vehicle | Front Axle |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.5 mm |
| Surface | Coated |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
| Weight | 9.66 kg |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.22
Important compatibility info
| Bearing Type | Ball Bearing |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Weight | 0.602 kg |
| Inner diameter | 54 mm |
| Additional Information 2 | with ball bearing |
| Thickness | 122 mm |
| Length | 180 mm |
| Placement on Vehicle | Rear |
| Hole Spacing | 148 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (170229)
- 1x Febi Bearing, propshaft centre bearing (05362)
£75.23
Important compatibility info
| Placement on Vehicle | Left |
| Weight | 1.378 kg |
| for OE number | 22 11 6 883 513 |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.23
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston), Brake Caliper with integrated parking brake |
| Paired article numbers | 196790 |
| Weight | 2.43 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 39.93 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.24
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston), Brake Caliper with integrated parking brake |
| Paired article numbers | 196789 |
| Weight | 2.43 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 39.93 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.24
Important compatibility info
| Type | Interior Blower |
| Weight | 1.6 kg |
| Function | Interior Blower |
| Voltage | 12 V |
| Rated Power | 182 W |
| Driver Position | for right-hand drive vehicles |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.24
Important compatibility info
| Paired article numbers | 197179 |
| Extra Description | febi Plus |
| Function | Door Lock |
| Type | Door Lock |
| Weight | 0.5 kg |
| Number of Connectors / Ports | 5 |
| Placement on Vehicle | Right Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.25
Important compatibility info
| Weight | 1.67 kg |
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Number of Teeth | 77. 122 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (14636)
- 1x Febi Water Pump, engine cooling (09758)
£75.25
Important compatibility info
| for OE number | 74 20 981 959 |
| Additional Information 2 | with seal ring |
| Number of Connectors / Ports | 2 |
| Weight | 0.66 kg |
| Type | Sender Unit, fuel tank |
| Function | Sender Unit, fuel tank |
| Screw length below head | 600 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.25
Important compatibility info
| Type | Door Lock |
| Paired article numbers | 197666 |
| Number of Connectors / Ports | 5 |
| Additional Information | with adjuster |
| Weight | 0.5 kg |
| Placement on Vehicle | Left Rear |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.25
Important compatibility info
| Weight | 0.828 kg |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 657 mm |
| Inner length 2 | 690 mm |
| Outer length 1 | 962 mm |
| Outer length 2 | 1023 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.25
Important compatibility info
| Number of Chain Links | 56 |
| Function | Chain Kit, oil pump drive |
| Type | Chain Kit, oil pump drive |
| Chain Type | Silent Chain, Closed chain |
| Weight | 0.127 kg |
| Additional Information 2 | Requires special tools for mounting |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (108992)
- 1x Febi Chain Tensioner, oil pump drive (109343)
£75.30
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 905 mm |
| Additional Information | with nuts |
| Rod/Strut | Push Rod |
| Weight | 7.200 kg |
| Pipe Diameter | 38 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.31
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 32087 |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Weight | 0.08 kg |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.32
Important compatibility info
| Weight | 1.840 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Right |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 52049744 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.32
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 210.4 mm |
| Width | 92.4 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 28.7 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.33
Important compatibility info
| Function | Mounting, engine |
| Weight | 1.800 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Left |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.34
Important compatibility info
| Weight | 1.312 kg |
| Placement on Vehicle | Front |
| Bolt Hole Circle Diameter | 80 mm |
| Additional Information | with nuts |
| Outer diameter | 124 mm |
| Thickness | 24 mm |
| Additional Information 2 | with bolts/screws, with washers |
| Function | Joint, propshaft |
| Inner diameter | 33 mm |
| Extra Description | ProKit |
| Number of Holes | 6 |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (03580)
- 3x Febi Screw (03715)
- 3x Febi Screw (03931)
- 1x Febi Assembly Kit, propshaft joint (22117)
£75.34
Important compatibility info
| Rim Hole Number | 6 -Hole |
| Weight | 8.575 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 319 mm |
| Thickness | 67.2 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 139.7 mm |
| Centering Diameter | 108 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.34
Important compatibility info
| Additional Information 2 | without lid |
| Number of Connectors / Ports | 2 |
| Additional Information | with coolant level sensor |
| Weight | 0.922 kg |
| Material | PA (polyamide) |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.35
Important compatibility info
| Additional Information 2 | with dryer |
| Refrigerant | R 134a |
| Core Depth | 16 mm |
| Core Length | 391 mm |
| Weight | 2.181 kg |
| Function | Condenser, air conditioning |
| Type | Condenser, air conditioning |
| Core Width | 560 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.37
Important compatibility info
| Weight | 0.220 kg |
| Type | Sensor, pneumatic suspension level |
| Function | Sensor, pneumatic suspension level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.37
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023