Important compatibility info
Height | 130 mm |
Outer diameter | 94 mm |
Additional Information 2 | with seal ring |
Filter type | Spin-on Filter |
Weight | 0.46 kg |
Type | Fuel filter |
Seal Diameter | 4 mm |
Internal Thread Size | 3/4" - 16 UNF |
Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 207 mm |
Height | 18 mm |
Width | 195 mm |
Filter type | Activated Carbon Filter |
Function | Filter, cabin air |
Type | Filter, cabin air |
Weight | 0.175 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.22 kg |
Material | Cast Aluminium |
Number of Wings | 7 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 30 mm |
Filter type | Pollen Filter |
Function | Filter, cabin air |
Length | 213 mm |
Weight | 0.03 kg |
Width | 193 mm |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 21 mm |
Material | Steel |
Function | Wheel Nut |
Wheel Fastening | Conical Seat F |
Quality/ Grade | 8 |
Tightening Torque | 110 Nm |
Bolt Head/Nut Design | Male Hex |
Surface | Zinc-coated |
Spanner Size | 21 |
Thickness | 17 mm |
Weight | 0.021 kg |
Internal Thread Size | M12 x 1,5 |
Type | Wheel Nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Placement on Vehicle | Front Axle Left |
Length | 1156 mm |
Paired article numbers | 170334 |
Number of Connectors / Ports | 2 |
Weight | 0.104 kg |
Cable Length | 1055 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | PU (Polyurethane) |
Function | Rubber Buffer, suspension |
Width | 58 mm |
Length | 89 mm |
Placement on Vehicle | Front Axle |
Weight | 0.09 kg |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | NBR (nitrile butadiene rubber) |
Function | Gasket, cylinder head cover |
Weight | 0.050 kg |
Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1872 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 7 |
Weight | 0.23 kg |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Paired article numbers | 197438 |
Weight | 0.215 kg |
Type | Splash Guard, brake disc |
Function | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber |
Inner diameter | 21 mm |
Placement on Vehicle | Front Axle Left |
Paired article numbers | 42841 |
Function | Mounting, stabiliser bar |
Weight | 0.13 kg |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Requires special tools for mounting |
Weight | 0.58 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 112 |
Timing Chain Size | G68HPF, G68HR |
Function | Timing Chain |
Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Teeth, Wheel Side | 30 |
Outer diameter | 94 mm |
Length | 163 mm |
Function | Joint Kit, drive shaft |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Type | Joint Kit, drive shaft |
Weight | 2.670 kg |
Internal Teeth, wheel side | 36 |
Seal Diameter | 85.6 mm |
External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 20 mm |
Width | 198 mm |
Filter type | Activated Carbon Filter |
Function | Filter, cabin air |
Weight | 0.220 kg |
Length | 221 mm |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Connectors / Ports | 2 |
Pump Type | Mono Pump |
Function | Washer Fluid Pump, window cleaning |
Weight | 0.096 kg |
Type | Washer Fluid Pump, window cleaning |
for OE number | 85330-60150 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Rubber/Metal |
Outer diameter | 80 mm |
Thickness | 84 mm |
Inner diameter | 14 mm |
Weight | 0.714 kg |
Type | Bushing, axle beam |
Function | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Mounting points diameter | 12.1 mm |
Function | Ball Joint |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Cone Size | 17.5 mm |
Weight | 0.87 kg |
External Thread Size | M14 x 1,5, M12 x 1,25 |
Type | Ball Joint |
Additional Information 2 | with crown nut |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.050 kg |
Placement on Vehicle | Front Axle |
Length | 150.9 mm |
Width | 65.4 mm. 62.6 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 18.6 mm. 18.2 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.4 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 48 mm |
Outer diameter | 90 mm |
Inner diameter | 30 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Alternator |
Alternator Charge Current | 100 A |
Belt Pulley Diameter | 58 mm |
Voltage | 12 V |
Type | Alternator |
Pulleys | with belt pulley |
Number of Ribs | 7 |
Weight | 5.78 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023