Proud to be a UK-based company
Contact us
Important compatibility info
| Additional Information | with coolant level sensor |
| Material | Plastic |
| Additional Information 2 | with lid |
| Weight | 1.17 kg |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.37
Important compatibility info
| Weight | 3.32 kg |
| Placement on Vehicle | Front Axle |
| Length | 1035 mm |
| Function | Stabiliser Bar, suspension |
| Type | Stabiliser Bar, suspension |
| Additional Information 2 | without coupling rod |
| Stabiliser Diameter | 23.6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (45304)
- 4x Febi Fastening Bolt, stabiliser bar (45305)
£112.40
Important compatibility info
| Function | Drive Shaft |
| External Teeth, Wheel Side | 28 |
| Min. Length | 622 mm |
| Type | Drive Shaft |
| Weight | 8.250 kg |
| Thread Size | M22x1,5 |
| Paired article numbers | 193517 |
| External Teeth, Diff.Side | 24 |
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Additional Information | with axle nut |
£112.42
Important compatibility info
| Housing Type | with housing |
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| Additional Information | with gasket/seal |
| Weight | 0.189 kg |
| Type | Mass Air Flow Sensor |
| for OE number | 1920.QV |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.49
Important compatibility info
| Length | 609 mm |
| Material | Steel |
| Outer diameter | 300 mm |
| Number of Connectors / Ports | 7 |
| Weight | 10.4 kg |
| Capacity | 36 l |
| Operating Pressure | 12.5 bar |
| Type | Air Tank, compressed-air system |
| Function | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.52
Important compatibility info
| Filter type | Activated Carbon Filter, High efficiency air filter (HEPA) |
| Height | 31 mm |
| Weight | 1.290 kg |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
| Length | 1022 mm |
| Width | 318 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.53
Important compatibility info
| Additional Information | with piston |
| Rolling piston material | Steel |
| Weight | 12.0 kg |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| External Thread Size | M12 x 1,75, M22 x 1,5, M16 x 2 |
| Thickness | 690 mm. 385 mm |
| Outer diameter | 257 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.54
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 17.8 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle Left |
| Outer diameter | 385 mm |
| Thickness | 62.1 mm |
| Brake Disc Thickness | 36 mm |
| Minimum thickness | 34.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Paired article numbers | 107503 |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
Technical Information
Attention, this is a sided brake disc.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.55
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Brake Disc Thickness | 36 mm |
| Outer diameter | 385 mm |
| Thickness | 62.1 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Paired article numbers | 107502 |
| Minimum thickness | 34.4 mm |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
| Weight | 17.8 kg |
| Rotor Style | Internally Vented |
Additional Information
Technical Information
Attention, this is a sided brake disc.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.55
Important compatibility info
| Additional Information | with gasket/seal |
| for OE number | 03L 128 063 T |
| Weight | 0.649 kg |
| Voltage | 12 V |
| Operating Mode | Electric |
| Number of Connectors / Ports | 5 |
| Function | Throttle body |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.56
Important compatibility info
| Weight | 1.088 kg |
| Length | 1060 mm |
| Width | 238 mm |
| Material | Metal, FPM (fluoride rubber) |
| Thickness | 1.3 mm |
| Type | Gasket, cylinder head |
| Function | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.56
Important compatibility info
| Material | Grey Cast Iron |
| Number of Wings | 9 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Weight | 9.270 kg |
| Type | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.58
Important compatibility info
| Inner length 2 | 785 mm |
| Inner length 1 | 715 mm |
| Weight | 0.972 kg |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Outer length 1 | 1063 mm |
| Outer length 2 | 1050 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Additional Information | with lids |
| Fill quantity | 11.4 l |
| Weight | 2.743 kg |
| Length | 590 mm |
| Width | 230 mm |
| Thickness | 150 mm |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 4 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 80 A |
| Belt Pulley Diameter | 54 mm |
| Weight | 5.0 kg |
| Current Strength | 80 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Thickness | 121 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 62 mm |
| Weight | 11.3 kg |
| Placement on Vehicle | Front Axle |
| Length | 845 mm |
| Width | 68 mm |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M38 x 1,5 RHT |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Weight | 2.7 kg |
| Operating Mode | Manual |
| Number of Connectors / Ports | 2 |
| Type | Tilt Pump, driver cab |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Width | 60 mm |
| Inner diameter | 26 mm |
| Outer diameter | 72 mm |
| Paired article numbers | 179849 |
| Weight | 2.972 kg |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Fill Medium | Brake Fluid |
| Function | Clutch Booster |
| Weight | 2.381 kg |
| Type | Clutch Booster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 18 mm |
| Placement on Vehicle | Rear |
| Function | Shock Absorber, driver cab suspension |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 379 mm |
| Min. Length | 334 mm |
| Weight | 2.9 kg |
| Operating Mode | Pneumatic |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Water pump impeller material | Grey Cast Iron |
| Material | Grey Cast Iron |
| Number of Wings | 12 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Weight | 7.075 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Weight | 1.79 kg |
| Length | 340 mm |
| Height | 285 mm |
| Width | 210 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 62 mm |
| Weight | 6.5 kg |
| Current Strength | 70 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 5 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 85 A |
| Belt Pulley Diameter | 48 mm |
| Weight | 4.6 kg |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Function | Brake Valve, service brake |
| Operating Pressure | 9 bar |
| Number of Connectors / Ports | 5 |
| Weight | 1.7 kg |
| Type | Brake Valve, service brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Weight | 3.0 kg |
| Length | 520 mm |
| Height | 210 mm |
| Width | 390 mm |
| Material | PP (Polypropylene) |
| Function | Expansion Tank, coolant |
| Fill quantity | 12 l |
| Extra Description | ProKit |
| Opening pressure | 120 kPa |
| Type | Expansion Tank, coolant |
| Additional Information | with coolant level sensor, with lids |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 90 A |
| Belt Pulley Diameter | 48 mm |
| Weight | 5.4 kg |
| Current Strength | 90 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| External Teeth, Wheel Side | 36 |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 26 |
| Wheel Sided Joint Diameter | 72.7 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Drive Shaft |
| Transmission-side joint diameter | 72 mm |
| Weight | 5.556 kg |
| Min. Length | 748 mm |
| Thread Size | M10 x 1,5 |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Extra Description | febi Plus |
| Function | Camshaft Adjuster |
| Weight | 0.760 kg |
| Type | Camshaft Adjuster |
| Number of Teeth | 46 |
| Placement on Vehicle | Intake Side |
| for OE number | 132 034 02 10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Max. Length | 272 mm |
| Min. Length | 222 mm |
| Pipe Diameter | 45 mm |
| Piston conrod diameter | 12 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| External Thread Size | M12 x 1,5 |
| Weight | 4.5 kg |
| Shock Absorber Mounting Type | Top pin, Bottom Yoke |
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Weight | 2.321 kg |
| Placement on Vehicle | Front Axle |
| Width | 95 mm |
| Outer diameter | 150 mm |
| Inner diameter | 21.5 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (05417)
- 1x Febi Shaft Seal, wheel hub (28257)
- 1x Febi Wheel Bearing (06126)
£112.60
Important compatibility info
| Weight | 1.97 kg |
| Number of Teeth | 63 |
| Function | Gear, air compressor |
| Type | Gear, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Bearing Type | Angular Ball Bearing |
| Weight | 2.972 kg |
| Placement on Vehicle | Rear Axle Right |
| Function | Wheel Bearing Kit |
| Width | 60 mm |
| Outer diameter | 72 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Type | Wheel Bearing Kit |
| Inner diameter | 26 mm |
| Paired article numbers | 179850 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Rotation Direction | Clockwise rotation |
| Mounting points diameter | 11 mm |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M16 x 1,5, M26 x 1,5 |
| Number of Connectors / Ports | 2 |
| Weight | 2.77 kg |
| Type | Hydraulic Pump, steering |
| for OE number | 1 439 958 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 697 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Weight | 8.000 kg |
| Cone Size | 30 mm |
| Adjustable | adjustable |
| Pipe Diameter | 52 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Weight | 2.13 kg |
| Length | 190 mm |
| Height | 160 mm |
| Width | 150 mm |
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| for OE number | 03C 109 158 H S3 |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 132 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Weight | 0.754 kg |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (105796)
- 1x Febi Tensioner, timing chain (36484)
- 1x Febi Guide, timing chain (174912)
- 1x Febi Guide, timing chain (173674)
£112.60
Important compatibility info
| Extra Description | febi Plus |
| Placement on Vehicle | Rear Axle Left |
| Function | Splash Guard, brake disc |
| Paired article numbers | 176757 |
| Weight | 1.974 kg |
| Type | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Function | Alternator |
| Type | Alternator |
| Belt Pulley Diameter | 49 mm |
| Weight | 5.5 kg |
| Pulleys | with belt pulley |
| Alternator Charge Current | 90 A |
| Number of Ribs | 6 |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Additional Information | with fastening/mounting material |
| Weight | 2.463 kg |
| Function | Water Pump, engine cooling |
| Seal Material | Rubber |
| Water pump impeller material | Metal |
| Number of Wings | 4 |
| Material | Cast Aluminium |
| Type | Water Pump, engine cooling |
| Replaces | 10647; 12367 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.61
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 258 mm. 197 mm |
| Thickness | 267 mm. 655 mm |
| Function | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
| External Thread Size | M16 x 1,5, M10 x 1,5 |
| Type | Bellow, air suspension |
| Weight | 9.7 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.67
Important compatibility info
| Rim Hole Number | 8 -Hole |
| Weight | 8.2 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 290 mm |
| Thickness | 73.5 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 19 mm |
| Bolt Hole Circle Diameter | 127 mm |
| Centering Diameter | 110 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.69
Important compatibility info
| Weight | 7.47 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Outer diameter | 258 mm. 230 mm |
| Thickness | 458 mm. 138 mm |
| Function | Bellow, air suspension |
| External Thread Size | M16 x 1,5 |
| Additional Information | with piston |
| Type | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.72
Important compatibility info
| Internal Thread Size | M22 x 1,5 |
| Function | Air Tank, compressed-air system |
| Type | Air Tank, compressed-air system |
| Number of Connectors / Ports | 4 |
| Weight | 8.1 kg |
| Capacity | 20 l |
| Operating Pressure | 15.5 bar |
| Outer diameter | 206 mm |
| Material | Steel |
| Length | 691 mm |
| Placement on Vehicle | Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.76
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Pressure Converter, exhaust control |
| Weight | 0.21 kg |
| Operating Mode | Electric-pneumatic |
| Extra Description | febi Plus |
| Type | Pressure Converter, exhaust control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.77
Important compatibility info
| Min. Length | 895 mm |
| Weight | 6.57 kg |
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Wheel Side | 25 |
| Thread Size | M18x1,5 |
| Paired article numbers | 193513 |
| External Teeth, Diff.Side | 22 |
| Additional Information | with axle nut |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Right |
£112.77
Important compatibility info
| Additional Information | with gasket/seal |
| Number of Connectors / Ports | 5 |
| Function | EGR Valve |
| Placement on Vehicle | Upper |
| for OE number | 14 71 053 08R |
| Type | EGR Valve |
| Weight | 0.650 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.77
Important compatibility info
| Function | Hydraulic Pump, steering |
| Weight | 1.57 kg |
| Type | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.94
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size | 22.7 mm |
| Weight | 4.742 kg |
| Track rollers material | Metal |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 176881 |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint |
| Material | Aluminium |
| Placement on Vehicle | Lower, Front Axle Right |
| Additional Information | with hydro mount, with lock nut |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.96
Important compatibility info
| Placement on Vehicle | Rear, Left, both sides |
| Weight | 4.267 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.00
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023