Important compatibility info
Weight | 2.250 kg |
Operating Mode | Automatic |
Type | Belt Tensioner, v-ribbed belt |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Metal |
Width of castor bearing surface | 38 mm |
Outer diameter 1 | 70 mm |
Outer diameter 2 | 78 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
External Teeth, Wheel Side | 28 |
Additional Information 2 | with nut |
Thread Size | M24 x 1,5 |
Paired article numbers | 182962 |
External Teeth, Diff.Side | 39 |
Weight | 11.004 kg |
Function | Drive Shaft |
Type | Drive Shaft |
Min. Length | 1117 mm |
Wheel Sided Joint Diameter | 98 mm |
Transmission-side joint diameter | 89 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.073 kg |
Placement on Vehicle | Lower |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 104 |
Function | Timing Chain Kit |
Type | Timing Chain Kit |
for OE number | 11 31 1 432 176 S2 |
Timing Chain Size | G68V-1, G68VCO |
Replaces | 30409 |
Additional Information | with slide rails, with chain tensioner |
Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (15547)
- 1x Febi Guide, timing chain (11728)
- 1x Febi Guide, timing chain (25326)
- 1x Febi Piston, timing chain tensioner (30416)
- 1x Febi Spring (30412)
- 1x Febi Seal Ring, timing chain tensioner (30413)
- 1x Febi Tensioner, timing chain (30417)
Important compatibility info
Weight | 3.811 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 18803 |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with hydro mount, with holder, with lock nut |
Additional Information 2 | with ball joint |
Additionally Required Parts | 7 12 9 906 196, 31 10 6 757 145, 31 10 6 772 199 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (12528)
- 1x Febi Mounting, control/trailing arm (18687)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (104977)
Important compatibility info
Pipe Diameter | 40 mm |
Rod/Strut | Push Rod |
Length | 850 mm |
Function | Centre Rod Assembly |
Cone Size | 26 mm |
Weight | 7.2 kg |
Extra Description | ProKit |
External Thread Size | M20 x 1,5 |
Internal Thread Size | M30 x 1,5 RHT |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Left, Lower |
Material | Sheet Steel |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Cone Size | 22 mm |
Weight | 5.582 kg |
Paired article numbers | 181050 |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Wheel Bearing Kit |
Outer diameter | 65 mm |
Inner diameter | 35 mm |
Weight | 0.560 kg |
Placement on Vehicle | Rear Axle |
Width | 21 mm |
Type | Wheel Bearing Kit |
Bearing Type | Tapered Roller Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (175597)
Important compatibility info
Additional Information 2 | with bolts/screws |
Weight | 2.780 kg |
Parameter | 7PK |
Width | 26 mm |
Outer diameter | 168 mm |
Inner diameter | 59 mm |
Number of Ribs | 6 |
Function | Belt Pulley, crankshaft |
Extra Description | ProKit |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (31212)
Important compatibility info
Type | Shock Absorber, driver cab suspension |
Shock Absorber Mounting Type | Top pin, Bottom Pin |
Function | Shock Absorber, driver cab suspension |
Pipe Diameter | 42 mm |
Min. Length | 231 mm |
Max. Length | 329 mm |
Weight | 1.3 kg |
Piston Diameter | 12 mm |
Placement on Vehicle | Front |
Operating Mode | Mechanical |
External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 7.7 kg |
Length | 840 mm |
Outer diameter | 10 mm |
Rod/Strut | Push Rod |
Cone Size | 22 mm |
Pipe Diameter | 42 mm |
Function | Centre Rod Assembly |
External Thread Size | M18 x 1,5 |
Extra Description | ProKit |
Additional Information | with castellated nut and split pins |
Internal Thread Size | M28 x 1,5 RHT |
Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gasket/seal |
Material | Cast Aluminium |
Weight | 0.84 kg |
Number of Wings | 7 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Additional Information
Technical Information
To identify the correct article, the currently installed product must be determined!
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.910 kg |
Outer diameter | 65 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Width of castor bearing surface | 24.5 mm |
Type | Belt Tensioner, v-ribbed belt |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Cylinder Head, air compressor |
Function | Cylinder Head, air compressor |
Weight | 1.2 kg |
Additional Information 2 | with bolts/screws, with spacer plate |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.408 kg |
Function | Chain Kit, oil pump drive |
Extra Description | Standard Medium Kit |
Number of Chain Links | 44 |
Type | Chain Kit, oil pump drive |
Chain Type | Simplex, Closed chain |
Additional Information 2 | Requires special tools for mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain Kit, oil pump drive (109479)
- 1x Febi Centering Bolt, crankshaft pulley (33618)
- 1x Febi Screw (48337)
Important compatibility info
Chain Type | Simplex, Closed chain |
Number of Chain Links | 86 |
Additional Information | with chain tensioner, with slide rails |
Placement on Vehicle | Upper |
Function | Timing Chain Kit |
Timing Chain Size | G53HRNG-1 |
Extra Description | Basic Short Kit |
Type | Timing Chain Kit |
Weight | 0.430 kg |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (28720)
- 1x Febi Guide, timing chain (28725)
- 1x Febi Guide, timing chain (28726)
- 1x Febi Tensioner, timing chain (28718)
Important compatibility info
Length | 809 mm |
Outer diameter | 50 mm |
Rod/Strut | Push Rod |
Weight | 8.355 kg |
Internal Thread Size | M30 x 1,5 RHT |
External Thread Size | M24 x 1,5 |
Function | Centre Rod Assembly |
Cone Size | 30 mm |
Pipe Diameter | 50 mm |
Additional Information | with castellated nut and split pins |
Driver Position | for left-hand/right-hand drive vehicles |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Combi Switch Function | with indicator function, with wipe-wash function, with high beam function |
Function | Steering Column Switch |
Weight | 0.403 kg |
Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Cone Size | 23 mm |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Inner diameter | 16 mm |
Material | Steel |
Weight | 10.398 kg |
Placement on Vehicle | Front Axle Left, Lower |
Paired article numbers | 175615 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 4 |
Ignition Coil | 4 Spark |
Fastening Type | Four-point attachment |
Function | Ignition Coil |
Weight | 0.831 kg |
Type | Ignition Coil |
Additional Information 2 | with plug, with cable |
for OE number | 82 00 360 911 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bearing/Mounting Type | Hydro Mount |
Weight | 1.207 kg |
Placement on Vehicle | Right |
Paired article numbers | 183362 |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023